DED 공정으로 제조된 Al-B4C 복합재의 미세조직 및 기계적 특성
Microstructures and Mechanical Properties of Al-B4C Composites Fabricated by DED Process
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Boron carbide (B4C) is highly significant in the production of lightweight protective materials when added to aluminum owing to its exceptional mechanical properties. In this study, a method for fabricating Al-B4C composites using high-energy ball milling and directed energy deposition (DED) is presented. Al-4 wt.% B4C composites were fabricated under 21 different laser conditions to analyze the microstructure and mechanical properties at different values of laser power and scan speeds. The composites fabricated at a laser power of 600 W and the same scan speed exhibited the highest hardness and generated the fewest pores. In contrast, the composites fabricated at a laser power of 1000 W exhibited the lowest hardness and generated a significant number of large pores. This can be explained by the influence of the microstructure on the energy density at different values of laser power.
Abstract
Boron carbide (B4C) is highly significant in the production of lightweight protective materials when added to aluminum owing to its exceptional mechanical properties. In this study, a method for fabricating Al-B4C composites using high-energy ball milling and directed energy deposition (DED) is presented. Al-4 wt.% B4C composites were fabricated under 21 different laser conditions to analyze the microstructure and mechanical properties at different values of laser power and scan speeds. The composites fabricated at a laser power of 600 W and the same scan speed exhibited the highest hardness and generated the fewest pores. In contrast, the composites fabricated at a laser power of 1000 W exhibited the lowest hardness and generated a significant number of large pores. This can be explained by the influence of the microstructure on the energy density at different values of laser power.
참고문헌 (13)
- M. P. Hong, , J. Mater. Process. Technol, 31, pp.309~ (2022)
- 강민철, "금속 적층제조기술의 국내외 개발동향과 기술적 이슈", 대한용접접합학회지, 34(4), pp.9~16 (2016), 대한용접접합학회[DOI]
- 김우성, "DED방식의 적층가공을 통한 금형으로의 응용사례 및 효과", 대한용접접합학회지, 32(4), pp.10~14 (2014), 대한용접접합학회
- 김우혁, "레이저 빔 직경 변화에 따른 17-4 PH 스테인리스 강 DED 적층 조형체의 미세조직 및 경도 변화", 한국분말재료학회지, 29(4), pp.314~319 (2022), 한국분말재료학회
- S. M. So, , Ceram. Int, 29, pp.338~ (2019)
- F. Thevenot, , J. Eur. Ceram. Soc, 6, pp.205~ (1990)
- J. L. Wang, , Ceram. Int, 40, pp.6793~ (2014)
- 이동현, "교반주조 및 압연공정으로 제조된 B4C", Al6061 금속복합재료의 마모 및 기계적 특성 연구, 2020, pp.33(5), 241~246[DOI]
- 안동규, "Directed Energy Deposition (DED) Process: State of the Art", International Journal of Precision Engineering and Manufacturing-Green Technology, 8(2), pp.703~742 (2021), 한국정밀공학회[DOI]
- D. Svetlizky, , Mater. Today, 49, pp.271~ (2021)
- S. M. Yoo, , J. Mater. Sci, 57, pp.1~ (2022)
- S. Bontha, , Mater. Sci. Eng. A, 513, pp.311~ (2009)
- S. Bontha, , J. Mater. Process. Technol, 178, pp.135~ (2006)