3D프린팅을 활용한 조선시대 꽃문양의 패턴 디자인 개발 연구 : 나전칠기 문양 중심으로
A Study on the Development of Pattern Design for Flower Patterns in the Joseon Dynasty Using 3D Printing : Focusing on NaJeonchilgi patterns
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study intends to develop modernized patterns into pattern designs using the new 3D printing technology of multi-product small-volume production method, which is emerging in the modern society, and re-examine traditional flower patterns with the artistic spirit of the Korean. As a result of analyzing the traditional flower patterns expressed in the NaJeonchilgi, focusing on 82 existing relics of the Joseon Dynasty, the following results were found. The flower patterns expressed in the Joseon Dynasty's NaJeonchilgi were analyzed as a total of 12 types of flowers: peony, plum blossoms, chrysanthemums, lotus, flower petals, peony, bouillon flowers, and peach flowers. The expression type was expressed as a single or complex type. In addition, among the traditional flower patterns expressed in the Joseon Dynasty's NaJeonchilgi, peony, plum, chrysanthemum, and lotus patterns appeared with the highest frequency. These traditional flower patterns were selected and extracted as motifs for the surface decoration design of fashion. In addition, modern reinterpreted motifs were developed into two designs for each pattern, and eight pattern designs were proposed using various pattern types in the virtual 3D one-piece design.Therefore, the purpose of this study was to develop and propose a pattern design as a fashion surface decoration that combines traditional and modern technologies by printing traditional flower patterns in 3D printing.
Abstract
This study intends to develop modernized patterns into pattern designs using the new 3D printing technology of multi-product small-volume production method, which is emerging in the modern society, and re-examine traditional flower patterns with the artistic spirit of the Korean. As a result of analyzing the traditional flower patterns expressed in the NaJeonchilgi, focusing on 82 existing relics of the Joseon Dynasty, the following results were found. The flower patterns expressed in the Joseon Dynasty's NaJeonchilgi were analyzed as a total of 12 types of flowers: peony, plum blossoms, chrysanthemums, lotus, flower petals, peony, bouillon flowers, and peach flowers. The expression type was expressed as a single or complex type. In addition, among the traditional flower patterns expressed in the Joseon Dynasty's NaJeonchilgi, peony, plum, chrysanthemum, and lotus patterns appeared with the highest frequency. These traditional flower patterns were selected and extracted as motifs for the surface decoration design of fashion. In addition, modern reinterpreted motifs were developed into two designs for each pattern, and eight pattern designs were proposed using various pattern types in the virtual 3D one-piece design.Therefore, the purpose of this study was to develop and propose a pattern design as a fashion surface decoration that combines traditional and modern technologies by printing traditional flower patterns in 3D printing.
참고문헌 (27)
- 이종석, "FDM 3D 프린팅을 활용한 패션디자인 개발에 관한 연구", 한국패션디자인학회지, 16(1), pp.101~115 (2016), 한국패션디자인학회[DOI]
- 이현승, "패션쇼를 위한 3D 프린팅 의상 디자인 개발 연구", 한국의류산업학회지, 21(3), pp.267~276 (2019), 한국의류산업학회[DOI]
- 감선주, "지속가능한 소재를 이용한 3D 프린팅 패션 제품 개발연구", 한국패션디자인학회지, 19(3), pp.1~18 (2019), 한국패션디자인학회[DOI]
- 이성규, "3D프린팅을 활용한 패션문화상품 개발 연구-한국전통 십장생 문양을 중심으로-", 박사, pp.2021
- 이명숙, "조선시대 식물문양의 현대화를 위한 패턴디자인 개발 연구", 박사, pp.2018
- 김은정, "동아시아 칠공예와 나전의 교류와 확산", 백산학보, (109), pp.113~138 (2017), 백산학회
- 최여정, "시각디자인에서 '시각적 모듈'의 개념 및 적용과 '아이콘화'와의 상관성에 관한 연구", 기초조형학연구, 8(3), pp.555~567 (2007), 한국기초조형학회
- 이광웅, "조선시대 나전칠기 문양의 조형적 특징에 관한 연구", 기초조형학연구, 10(2), pp.311~318 (2009), 한국기초조형학회
- 신희경, "조선 후기 나전 유물에 관한 연구-나전베갯모(민속 1172)의 분석을 중심으로-", 한국디자인문화학회지, 19(4), pp.403~414 (2013), 한국디자인문화학회
- 김준, "나전칠기 문화상품의 사례와 발전방향 연구", 기초조형학연구, 14(4), pp.167~179 (2013), 한국기초조형학회
- 손대현, "나전칠기 전통문양의 시대별 흐름과 현대화–작품을 중심으로-", 아시아민족조형학회, 15, pp.41~63 (2015)
- Samit Chakraborty, "3D printing technology of polymer-fiber composites in textile and fashion industry: A potential roadmap of concept to consumer", Composite Structures, 248, pp.112562~ (2020), Elsevier BV[DOI]
- 김천환, "실전 3D프린팅 활용가이드", pp.10~ (2017), 비제이퍼블릭
- 노수황, "3D프린팅 모델링&활용입문서", pp.22~23 (2017), 메카피아
- "제조혁신과 소재산업 -첨단소재와3D프린팅을 중심으로-, 산업연구원 ISSUE PAPER 연구보고서" (2016), 김상훈[URL]
- 3D 프린터에 사용되는 소재의 종류 및 유해물질 특성 연구, "정은교", 한국산업안전보건공단, 18~ (2019)
- BolugodduSandeep, "Scope of 3D printing in manufacturing industries-A review", ScienceDirect, 45(7), pp.6941~6945 (2021)[DOI]
- 2021년 3D프린팅산업진흥 시행계획, 관계부처합동 조사보고서, "과기정통부 외 관계부처", 4~ (2021)
- 국립중앙박물관, "천년을 이어온 빛 나전칠기", pp.71~ (2006), 국립중앙박물관
- 김소라, "금속 옻칠기법의 역사적 고찰과 조형성 분석연구 - 평탈기법을 중심으로 -", 조형디자인연구, 15(4), pp.29~44 (2012), 사단법인 한국조형디자인협회
- "전통문양"[URL]
- 장소영, "전통 꽃문양을 응용한 패션문화상품 디자인 개발 - 모란문양을 중심으로 -", 한국패션디자인학회지, 16(2), pp.159~171 (2016), 한국패션디자인학회[DOI]
- 김지선, "한국 전통 꽃문양의 상징성과 형태 및 색채 특성에 따른 조형성", 박사, 의류환경학, pp.2007
- 전승현, "조선시대 매화문을 응용한 복식디자인 연구-디지털 프린팅 기법을중심으로 -,", 한국패션디자인학회지, 3(1), pp.59~ (2003)
- 신소윤, "고려시대 상감청자 국화문 연구", 석사, pp.2020
- 이경미, "한국 전통문양에 나타난 상징성 연구 : 꽃문양을 중심으로", 석사, 미술교육, pp.2004
- 이선화, "텍스타일디자인", pp.41~ (1992), 미진사