B 첨가 620oC급 터빈 케이싱용 고Cr 페라이트계 주강의 용접성에 미치는 탄소함량의 영향
Effects of Carbon Content on the Weldability of B-Containing 620oC Grade High Cr Ferritic Cast Steel for Turbine Casing
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Effectsof carbon content on the weldability of B-containing 620 ℃grade high Cr ferritic cast steels were investigated. Cast steel with lower carbon content of 0.07% showed lower HAZ hardness because of the formation of lower carbon martensite in HAZ. It also showed less solidification cracking susceptibility in weld metal because of the formation of delta ferrite.However, hot ductility showed no difference between cast steels with lower and higher carbon contents. Cast steel with lower carbon content showed greater HAZ softening after PWHT in the region heated between AC1 and AC3 because of its higher base metal hardness.
Abstract
Effectsof carbon content on the weldability of B-containing 620 ℃grade high Cr ferritic cast steels were investigated. Cast steel with lower carbon content of 0.07% showed lower HAZ hardness because of the formation of lower carbon martensite in HAZ. It also showed less solidification cracking susceptibility in weld metal because of the formation of delta ferrite.However, hot ductility showed no difference between cast steels with lower and higher carbon contents. Cast steel with lower carbon content showed greater HAZ softening after PWHT in the region heated between AC1 and AC3 because of its higher base metal hardness.
참고문헌 (15)
- Abe, F., "Microstructure and Creep Strength of Welds in Advanced Ferritic Power Plant Steels", Science and Technology of Welding and Joining, 9(1), pp.22~30 (2004)
- Albert, S., "HAZ Microstructures of High-B 9Cr Heat Resistant Steel Weldments", CAMP-ISIJ, 16(6), pp.1573~ (2003)
- Albert, S., "Microstructure Evolution of High-B 9Cr Heat Resistant Steel HAZ", CAMP-ISIJ, 17, pp.482~ (2004)
- Albert, S., "Improving the Type IVCracking Resistance of 9Cr Ferritic Steels by Boron Addition", CAMP-ISIJ, 16(6), pp.1574~ (2003)
- Azuma, T., "Effect of B on Microstructural Change during Creep Deformation in High Cr Ferritic Heat Resistant Steel", Journal of the Iron and Steel Institute of Japan, 88, pp.678~ (2002)
- Cerjak, H., "Mechanical Properties of a 9Cr-lMo Multi-Pass Thick Section Weld", Proceedings of 4th Int'l Conference on Trends in Welding Research, pp.563~568 (1995)
- Eisenhuttenleute, V., "STEEL, A Handbook for Materials Research and Engineering, Vol 1", pp.198~ (1992), Springer-Verlag
- El-Kashif, E., "Effects of Nitrogen in 9Cr-3W-3Co Ferritic Heat Resistant Steels Containing Boron", ISIJ International, 42(12), pp.1468~1476 (2002)
- Hattestrand, M., "Boron Distribution in 9-12% Chromium Steels", Materials Science and Engineering, A270, pp.33~37 (1999)
- Horiuchi, T., "Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing W", ISIJ International, 42, pp.567~571 (2002)
- Lundin, C., "Hot Ductility and Hot Cracking Behavior of Modified 316 Stainless Steels Designed for High-Temperature Service", Welding Journal, pp.189s~200s (1993)
- Development of a New 12%Cr Steel Casting Utilizing USC Thermal Power Plant, "Okino, M. Tanaka, Y.", JSW, 54~64, pp.JSW Research bulletin, No 54 (1998)
- Sikka, V., "Development of Modified 9Cr-1Mo Steel for Elevated-Temperature Service", Proceedings of Topical Conference on Ferritic Alloys for Use in Nuclear Energy, pp.317~327 (1984)
- Takahashi, N., "Effect of Boron on The Long-Time Creep Rupture Strength of 12%Cr Heat Resisting Steel", Journal of the Iron and Steel Institute of Japan, 61, pp.2263~2273 (1975)
- Tsuchida, Y., "Study on Creep Rupture Strength in Heat Affected Zone of 9Cr-1Mo-V-Nb-N Steel by Welding Heat Cycle Simulation", Quarterly Journal of the Japan Welding Society, 13(4), pp.573~578 (1995)