유도초음파를 이용한 수중 강관의 기계적 결함 검출
Mechanically Fabricated Defects Detection on Underwater Steel Pipes using Ultrasonic Guided Waves
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study presents a detection method for mechanically fabricated defects on underwater steel pipes, using ultrasonic guided waves. Three different diameters (60, 90, and 114 mm) of 1000-mm long steel pipes were considered, along with several experimental design factors such as incident angles, incident distances, and the degrees of defects, to investigate how these factors affected the experimental results - the detectability of the mechanical defects. From the experimental results, we determined that the amplitude and arrival time of the first received wave signals gave a promising clue for distinguishing the existence of the defects and their severities. Between the amplitude and arrival time, the arrival time gave a more promising indication since it was affected by the experimental factors in a constant manner. Therefore, it was shown that the use of ultrasonic guided waves for underwater pipe inspection is feasible.
Abstract
This study presents a detection method for mechanically fabricated defects on underwater steel pipes, using ultrasonic guided waves. Three different diameters (60, 90, and 114 mm) of 1000-mm long steel pipes were considered, along with several experimental design factors such as incident angles, incident distances, and the degrees of defects, to investigate how these factors affected the experimental results - the detectability of the mechanical defects. From the experimental results, we determined that the amplitude and arrival time of the first received wave signals gave a promising clue for distinguishing the existence of the defects and their severities. Between the amplitude and arrival time, the arrival time gave a more promising indication since it was affected by the experimental factors in a constant manner. Therefore, it was shown that the use of ultrasonic guided waves for underwater pipe inspection is feasible.
참고문헌 (23)
- 박경조, "파이프 원주방향 결함에 의한 유도파 반사", 여수대학교 논문집, 14(2), pp.217~225 (1999)
- 안석환, "감육배관의 손상모드에 따른 음향방출 특성", 한국해양공학회지, 16(5), pp.66~72 (2002), 한국해양공학회
- 이문진, "해양유류오염사고 위해도 평가에 관한 연구", 한국해양공학회지, 23(1), pp.24~30 (2009), 한국해양공학회
- 정종관, "서해안 원유유출사고와 해안지역 생태복구", 국토, 통권 : 317, pp.118~125 (2008)
- Achenbach,J.D, "Quantitative Nondestructive Evaluations", International Journal of Solids and Structures, 37, pp.13~27 (2000)
- Alleyne, D.N, "The Long Range Detection of Corrosion in Pipes Using Lamb Waves", Review in Progress of Quantitative. Nondestructive Evaluation, 14B, pp.2073~2080 (1995), Plenum Press
- Alleyne, D.N, "The Effect of Discontinuities on the Long Range Propagation of Lamb Waves in Pipes", I Mech. E, Part E, 210, pp.217~226 (1996)
- Aristégui, C, "Guided Waves in Fluid-Filled Pipes Surrounded by Different Fluids", Ultrasonics, 39, pp.367~375 (2001)
- Cheong, Y.M, "Ultrasonic Guided Wave Parameters for Detection of Axial Cracks in Feeder Pipes of PHWR Nuclear Power Plants", Ultrasonics, 42, pp.883~888 (2004)
- Committee on the Safety of Marine Pipelines, "Improving the Safety of Marine Pipelines, National Research Council" (1994), National Academic Press
- Crump, H.M, "Use of Magnetic Flux Leakage Inspection Pigs for Hard Spot Detection and Repair", Materials Performance, 30(6), pp.26~28 (1991)
- Gloria, N.B.S, "Development of Magnetic Sensor for Detection and Sizing of Internal Pipeline Corrosion Defects", NDT&E International, 42, pp.669~677 (2009)
- Lohr, K.R, "Ultrasonic Guided Wave and Acoustic Impact Methods for Pipe Fouling Detection", Journal of Food Engineering, 56, pp.315~324 (2003)
- Long, R, "Acoustic Wave Propagation in Buried Iron Water Pipes", Royal Society Series A, 459, pp.2749~2770 (2003)
- Lowe, M.J.S, "Defect Detection in Pipes using Guided Waves", Ultrasonics, 36, pp.147~154 (1998)
- Ma, J, "Scattering of the Fundamental Torsional Mode by Axisymmetric Layer Inside a Pipe", Journal of Acoustical Society of America, 120, pp.1871~1880 (2006)
- Macdonald, K.A, "Assessing Mechanical Damage in Offshore Pipelines-Two Case Studies", Engineering Failure Analysis, 14, pp.1667~1679 (2007)
- Na, W.B, "Underwater Pipeline Inspection Using Guided Waves", Journal of Pressure Vessel Technology, 124, pp.196~200 (2002)
- 나원배, "Attenuation of Fundamental Longitudinal Cylindrical Guided Wave Propagating in Liquid-Filled Steel Pipes", 한국해양공학회지, 19(5), pp.26~33 (2005), 한국해양공학회
- Nishino, H, "Propagation Phenomena of Wideband Guided Waves in a Bended Pipe", Ultrasonics, 44, pp.1139~1143 (2006)
- Ott,R, "Sound Truth and Corporate Myths: The Legacy of the Exxon Valdez Oil Spill" (2005), Dragonfly Sisters Press
- Pan, E, "Mode Selection of Guided Waves for Ultrasonic Inspection of Gas Pipelines with Thick Coating", Mechanics of Materials, 31, pp.165~174 (1999)
- Tien, S.W, "Study of a Risk-Based Piping Inspection Guideline System", ISA Transactions, 46, pp.119~126 (2007)