수중로봇용 덕트 추진기의 설계 및 성능해석
Design and Performance Analysis of Ducted Propulsor for Underwater Robot
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Underwater robots are generally used for the construction of seabed structures, deep‐sea ecosystem research, ocean energy development, etc. A ducted marine propulsor is widely used for the thruster of an underwater robot because of its collision protection, efficiency increase, cavitation reduction, etc. However, the flow of a ducted propeller is very complex because it involves strong flow interactions between the blade impeller and duct. The present work aimed to design a ducted propeller using 2‐D strip theory and CFD analysis. The hydrodynamic forces (i.e. and ) were computed to set the local angle of attack in a spanwise direction of the propeller blade. After the propeller design, performance coefficients such as the thrust, torque, and efficiency were computed to check whether the designed performance was achieved. To validate the present analysis, the thrust was compared with experimental data and good agreement was obtained.
Abstract
Underwater robots are generally used for the construction of seabed structures, deep‐sea ecosystem research, ocean energy development, etc. A ducted marine propulsor is widely used for the thruster of an underwater robot because of its collision protection, efficiency increase, cavitation reduction, etc. However, the flow of a ducted propeller is very complex because it involves strong flow interactions between the blade impeller and duct. The present work aimed to design a ducted propeller using 2‐D strip theory and CFD analysis. The hydrodynamic forces (i.e. and ) were computed to set the local angle of attack in a spanwise direction of the propeller blade. After the propeller design, performance coefficients such as the thrust, torque, and efficiency were computed to check whether the designed performance was achieved. To validate the present analysis, the thrust was compared with experimental data and good agreement was obtained.
참고문헌 (9)
- Jang, H. Y., "Development of Underwater Thrusting System Driven by BLCD Motor", Proceedings of the Korean Society of Ocean Engineers 2010 Fall Annual Conference, pp.41~45 (2010)
- Jang, J. H., "Propulsive performance analysis of ducted marine propulsors with rotor- stator interaction", Journalof Shipand Ocean Technology, 8(1), pp.31~41 (2004)
- 정태환, "CFD 해석을 이용한 덕트형 자율무인잠수정의 운동해석 및 설계 최적화에 관한 연구", 한국해양공학회지, 23(1), pp.48~53 (2009), 한국해양공학회
- Jung, Y. R., "A Study on the Flow Characteristics of a Marine Propulsor with Variation of Tip Clearances Including Rotor-Stator Interaction", 박사, pp.2002
- Jung, Y. R., "Numerical Flow Analysis of a Single-Stage Ducted Marine Propulsor", 7th International Congresson Fluid Dynamicsand Propulsion (2001)
- Kerwin, J. E., "A surface panel method for the hydrodynamic analysis of ducted propellers", Transactions of SNAME, 1987-1995 (1987)
- 이종무, "상용 추진기를 사용하는 무인잠수정의 추진성능 추정", 한국해양공학회지, 25(1), pp.27~31 (2011), 한국해양공학회
- Park, W. G., "Numerical Flow and Performance Analysis of Waterjet Propulsion System", Ocean Engineering, 32, pp.1740~1176 (2005)
- Park, W.G., "Numerical Flow Analysis of Single-Stage Ducted Marine Propeller", Ocean Engineering, 32, pp.1260~1277 (2005)