수직축 조류 터빈 발전효율 평가를 위한 유동-터빈 연동 CFD 해석 (II)
Flow-Turbine Interaction CFD Analysis for Performance Evaluation of Vertical Axis Tidal Current Turbines (II)
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
CFD (computational fluid dynamics) analyses that considered the dynamic interaction effects between the flow and a turbine were performed to evaluate the power output characteristics of two representative vertical‐axis tidal‐current turbines: an H‐type Darrieus turbine and Gorlov helical turbine (GHT). For this purpose, a commercial CFD code, Star‐CCM+, was utilized, and the power output characteristic were investigated in relation to the scale ratio using the relation between the Reynolds number and the lift‐to‐drag ratio. It was found that the power coefficients were significantly reduced when the scaled model turbine was used, especially when the Reynolds number was lower than 105. The power output characteristics of GHT in relation to the twisting angle were also investigated using a three‐dimensional CFD analysis, and it was found that the power coefficient was maximized for the case of a Darrieus turbine, i.e., a twisting angle of 0°, and the torque pulsation ratio was minimized when the blade covered 360° for the case of a turbine with a twisting angle of 120°.
Abstract
CFD (computational fluid dynamics) analyses that considered the dynamic interaction effects between the flow and a turbine were performed to evaluate the power output characteristics of two representative vertical‐axis tidal‐current turbines: an H‐type Darrieus turbine and Gorlov helical turbine (GHT). For this purpose, a commercial CFD code, Star‐CCM+, was utilized, and the power output characteristic were investigated in relation to the scale ratio using the relation between the Reynolds number and the lift‐to‐drag ratio. It was found that the power coefficients were significantly reduced when the scaled model turbine was used, especially when the Reynolds number was lower than 105. The power output characteristics of GHT in relation to the twisting angle were also investigated using a three‐dimensional CFD analysis, and it was found that the power coefficient was maximized for the case of a Darrieus turbine, i.e., a twisting angle of 0°, and the torque pulsation ratio was minimized when the blade covered 360° for the case of a turbine with a twisting angle of 120°.
참고문헌 (9)
- Gorlov, A. M., "The Helical Turbine : a New Idea for Lowhead Hydropower", Hydro Rev, 14(5), pp.44~50 (1995)
- Hyun, B. S., "Performance Analysis and Design of Vertical Axis Tidal Stream Turbine", Journal of Shipping and Ocean Engineering, 2, pp.191~200 (2012)
- 정현주, "조류발전용 수직축 터빈 주위의 비정상 유동 수치해석", 한국해양환경•에너지학회지, 12(1), pp.9~14 (2009), 한국해양환경·에너지학회
- Kim, J. M., "Field test for 100kW floating tidal power system", Proceedings of the Asian Wave and Tidal Energy Conference 2012 (2012)
- Development of Utilization Technique for Tide and Tidal Current Energy, "Korea Ocean Research and Development Institute(KORDI)", Transport and Maritime Affairs, ~ (2011)
- Kroo, I., "Applied Aerodynamics:A Digital Textbook" (2007), Desktop Aeronautics, Inc
- Li, Y., "Modeling of Twin-turbine Systems with Vertical Axis Tidal Current Turbines : Part I-Power output", Ocean Engineering, 37(7), pp.627~637 (2010)
- Shiono, M., "An Experimental Study of the Characteristics of a Darrieus Turbine for Tidal Power Generation", Electronic Engineering in Japan, 132(3), pp.781~787 (2000)
- 이진학, "수직축 조류 터빈 발전효율 평가를 위한 유동-터빈 연동 CFD 해석 (I)", 한국해양공학회지, 27(3), pp.67~72 (2013), 한국해양공학회