스트레인 게이지를 이용한 C-type LNG Mock-up 탱크 내조 실 변형 거동 측정
Measurement of Real Deformation Behavior in C-type Lng Mock-up Tank using Strain Gage
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
A C-type LNG mock-up tank was constructed to evaluate the durability of the tank and its structural safety. An experimental strain analysis system equipped with strain gages was designed to investigate the structural behavior of the inner tank at a high hydraulic pressure. In addition, the insulation used in the space between the inner tank and outer tank had a compressive strength and the inner tank thickness of the cylindrical shell and hemisphere was 4.0 mm, which was designed to be thinner than the existing rules. The strains on the inner tank were measured with increasing pressure, and these measurements were compared and analyzed at the strain gage attachment points.
Abstract
A C-type LNG mock-up tank was constructed to evaluate the durability of the tank and its structural safety. An experimental strain analysis system equipped with strain gages was designed to investigate the structural behavior of the inner tank at a high hydraulic pressure. In addition, the insulation used in the space between the inner tank and outer tank had a compressive strength and the inner tank thickness of the cylindrical shell and hemisphere was 4.0 mm, which was designed to be thinner than the existing rules. The strains on the inner tank were measured with increasing pressure, and these measurements were compared and analyzed at the strain gage attachment points.
참고문헌 (15)
- American Bureau of Shipping (ABS), "Propulsion and Auxiliary Systems for Gas Fueled Ships", ~ (2011)
- Greener Shipping in the Baltic Sea, "Det Norske Veritas (DNV)", ~ (2010)
- Greener Shipping in North America, "Det Norske Veritas (DNV)", ~ (2011)
- International Maritime Organization (IMO), "International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk", ~ (2010)
- Kang, D.M, "Stress Measurements Using Strain Gages", Journal of the Korean Society of Mechanical Engineers, 33(7), pp.661~670 (1993)
- Kim, J. H, "Stability Evaluation of Closed Mock-up Tank for Developing Korean LNG Carrier Cargo Containment System", Proceedings of the Korean Society of Mechanical Engineers Conference, pp.470~475 (2009)
- Kim, J. K, "Fatigue Crack Growth Behavior of Membrane Material for LNG Storage Tank at Low Temperature", Journal of Ocean Engineering and Technology, 14(1), pp.23~28 (2000)
- 김경수, "SUS304L 겹침 용접부에 대한 극저온에서의 인장 및 피로강도에 관한 실험적 연구", 한국해양공학회지, 22(3), pp.96~102 (2008), 한국해양공학회
- 김태우, "LNG 연료 추진선의 연료 탱크로서 탱크컨테이너의 적용성 연구 및 구조설계", 대한조선학회 논문집, 49(6), pp.504~511 (2012), 대한조선학회
- Kim, Y. K, "The Measurement of Real Deformation Behavior in Pilot LNG Storage Tank Membrane by using Strain Gage", Proceedings of the Korean Society of Mechanical Engineers Conference, pp.108~113 (2004)
- Kim, Y. K, "The Measurement of Membrane Deformation Behavior in Kogas Pilot LNG Storage Tank by the use of Mechanical", Electrical Sensor(Ⅰ), 2003, 159~164
- Kim, Y. K, "Construction of KOGAS Closed Mock-up tank for LNG Carrier application", Proceedings of the Korean Institute of Gas Autumn Conference, pp.36~39 (2010)
- Lee, H. S, "A Study on Failure Characteristic of Spherical Pressure Vessel", Journal of Materials Processing Technology, 164-165, pp.882~888 (2005)
- 이장현, "LNG 화물창 방열재 균열에 따른 액화천연가스의 확산 및 온도 예측을 위한 수치 모델", 한국해양공학회지, 28(6), pp.517~526 (2014), 한국해양공학회
- 임상식, "소형 압력 용기의 변형 및 파열 경향에 대한 연구", 에너지공학, 23(3), pp.146~149 (2014), 한국에너지학회