상부 해양 요소 접합부의 피로 평가
Fatigue Behavior of Offshore Topside Structure
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Abstract
Large-scale model tests of welded topside joints were carried out to observe the fatigue behavior of API 2W Gr.50 steel produced by POSCO. The fatigue crack behaviors for various loading conditions were measured and investigated around the critical joint sections. The experimental results have been verified with numerical approaches and also compared with the AWS D1.1 and DnV RP-C203 design curves. The large-scale experiment models were fabricated, based on the actual operating east area fixed platform. The dimensions of the models were slightly modified to accommodate the test facilities and capacities. The fatigue test was carried out having △Q of T1=705.6kN, T2=749.7kN and T3=793.8kN. The three specimens were statically loaded 20 times, with various loadings of about 50kN intervalsbetween the maximum and minimum loads required in the fatigue tests. This loading removed the residual stress in the specimen before the fatigue tests. The topside joint crack was initiated from the brace heel, where the maximum tensile stress occurred. The API 2W Gr.50 steel satisfied the AWS D1.1 detail category C and DnV RP-C203 detail category F ΔS-N curve.
참고문헌 (17)
- "강지진시 인접교량간의 충돌 메커니즘과 충격 저감 효과", 20(5), pp.63~69 (2006)
- "해양구조물 전망 및 실대 구조물 피로성능평가", pp.221~232 (2005)
- "API 2W Gr.50 강재를 이용한 대형 Tubular Joint 피로성능평가", 19(3), pp.54~58 (2005)
- "해양시장의 전망과 대응전략", pp.282~305 (2003)
- "An Investigation on Fatigue in High-Strength Steel Offshore Structures", pp.328~342 (1998)
- "Life Prediction for Tubular Joints in Offshore Structures", pp.339~344 (1982)
- "Fatigue Fracture Mechanics Analysis of T and Y Joints", pp.315~326 (1982)
- "Fatigue Behaviour of Tubular Joints Made of China-Made Platform Steel", 6(1), pp.103~110 (1992)
- "A Study on the Fatigue Crack in Large-Scale Tubular Joints for Offshore Structures", pp.341~345 (2005)
- "Fatigue Tests on Large Post Weld Heat Treated and As Welded Tubular T-Joints", pp.327~334 (1982)
- "Fatigue Properties of 50-kgf", mm2 High-Strength Hull Structural Steels Manufactured by Thermomechanical Control Process, 1986, 83~96
- "Fatigue Behavior of Welded Circular Hollow Section Joints in Bridges" (2003)
- "Hybrid Design Concept Using High-Strength Cast Steel Inserts for Tubular Joints of Offshore Structures", 2, pp.1225~1230 (1996)
- "Fatigue Performance of Composite Tubular K-Joints for Truss Type Bridge", 19(2), pp.9~23 (2002)
- "Fatigue Tests on Welded Tubular T-Joints with Equal brace and Chord Diameters", pp.133~142 (1983)
- "11월 1일 원고 접수" (2006)
- "11월 29일 최종 수정본 채택" (2006)