직접전단시험에 의한 폐타이어 혼합경량토의 전단특성 연구
Shearing Properties of Waste Tire Powder-Added Lightweight Soil by Direct Shear Test
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
This study investigated the shear strength characteristics of waste tire powder-added lightweight soil (WTLS), which were developed to recycle dredged soil, bottom ash, and waste tires. The WTLS used in this experiment consisted of dredged soil, bottom ash, waste tire powder, and cement. Test specimens were prepared with various contents of waste tire powder ranging from 0% to 100% at 25% intervals and bottom ash contents of 0% or 100% by the weight of the dry dredged soil. In this study several series of direct shear tests were carried out, which indicated that the shear properties of WTLS were strongly influenced by the mixing conditions, such as the waste tire powder content and bottom ash content. The unit weight, as well as the shear strength of the WTLS, decreased with an increase in waste tire powder content. The shear strength of WTLS with bottom ash was 1.34 times greater than that of WTLS without bottom ash. An average increase in cohesion of 30 kPa was obtained in WTLS with the inclusion of bottom ash due to the bond strength induced from the pozzolanic reaction of the bottom ash. In this test, the maximum value of the internal friction angle was obtained with a 25% content of waste tire powder.
Abstract
This study investigated the shear strength characteristics of waste tire powder-added lightweight soil (WTLS), which were developed to recycle dredged soil, bottom ash, and waste tires. The WTLS used in this experiment consisted of dredged soil, bottom ash, waste tire powder, and cement. Test specimens were prepared with various contents of waste tire powder ranging from 0% to 100% at 25% intervals and bottom ash contents of 0% or 100% by the weight of the dry dredged soil. In this study several series of direct shear tests were carried out, which indicated that the shear properties of WTLS were strongly influenced by the mixing conditions, such as the waste tire powder content and bottom ash content. The unit weight, as well as the shear strength of the WTLS, decreased with an increase in waste tire powder content. The shear strength of WTLS with bottom ash was 1.34 times greater than that of WTLS without bottom ash. An average increase in cohesion of 30 kPa was obtained in WTLS with the inclusion of bottom ash due to the bond strength induced from the pozzolanic reaction of the bottom ash. In this test, the maximum value of the internal friction angle was obtained with a 25% content of waste tire powder.
참고문헌 (30)
- 김수삼, "준설토와 EPS를 혼합한 경량혼합처리토의 강도 특성", 한국철도학회논문집, 5(2), pp.61~69 (2002), 한국철도학회
- 김영진, "폐타이어가루 혼합토의 특성실험", 1993년 학술발표회 개요집, pp.483~486 (1993), 대한토목학회
- 김윤태, "준설토 재활용을 위한 무보강 및 보강 경량토의 압축거동특성 비교", 한국해양공학회지, 19(6), pp.44~49 (2005), 한국해양공학회
- 김윤태, "지오그리드 혼합 보강경량토의 압축강도특성 연구", 한국지반공학회논문집, 22(7), pp.37~44 (2006), 한국지반공학회
- 김윤태, "폐어망을 이용한 보강 경량토의 압축거동특성", 한국지반공학회논문집, 22(11), pp.25~35 (2006), 한국지반공학회
- 김윤태, "섬유보강 혼합경량토의 역학적 특성 비교", 한국해양공학회지, 22(4), pp.51~58 (2008), 한국해양공학회
- 김윤태, "준설토와 Bottom Ash 재활용을 위한 복합지반재료 개발", 한국지반공학회논문집, 23(11), pp.77~85 (2007), 한국지반공학회
- 김주철, "준설토를 이용한 경량기포혼합토의 역학적 특성 연구", 한국지반공학회논문집, 18(4), pp.309~317 (2002), 한국지반공학회
- 김진만, "폐타이어의 철도진동 저감효과에 대한 실험적연구", 한국환경복원기술학회지, 9(1), pp.31~40 (2006), 한국환경복원기술학회
- 김진만, "옹벽 뒤채움재로서 폐타이어 조각의 활용방안", 한국폐기물자원순환학회지, 21(2), pp.117~126 (2004), 한국폐기물자원순환학회
- 김홍택, "폐 EPS 조각 혼합경량토의 토질공학적 특성 연구", 대한토목학회 학술발표회논문집, pp.429~432 (1996)
- 자원활용·소재 및 리싸이클링 기술동향 분석 연구, 최종보고서, "산업자원부", 22~25 (2002)
- 윤길림, "준설토를 활용한 경량혼합토의 역학적 특성 연구", 한국지반공학회논문집, 18(4), pp.75~83 (2002), 한국지반공학회
- 윤여원, "폐타이어와 토목섬유에 의한 지반보강효과의 비교연구", 한국지반공학회논문집, 20(5), pp.50~59 (2004), 한국지반공학회
- 장용채, "EPS를 이용한 경량성토공법", 한국지반공학회논문집, 10(3), pp.149~172 (1994)
- 폐타이어 고무분말 특성분석 및 국내ㆍ외 시장조사를 통한 마케팅 전략 수립, "코오롱건설", 코오롱건설주식회사, ~ (2001)
- Bosscher, P.J., "Design of Highway Embankments Using Tire Chips", Journal of Geotechnical and Geoenvironmental Engineering, 123(4), pp.295~304 (1997)
- Cetin, H., "Geotechnical Properties of Tire-Cohesive Clayey Soil Mixtures as a Fill Material", Engineering Geology, 88, pp.110~120 (2006)
- Fattuhi, N.I., "Cement-Based Materials Containing Shredded Scrap Truck Tyre Rubber", Construction and Building Materials, 10(4), pp.229~236 (1996)
- "User Guidelines for Waste and Byproduct Materials in Pavement Construction, FHWA-RD-97-148, Federal Highway Administration, Washington, D. C"[URL]
- Foose, G., "Sand Reinforced with Shredded Waste Tires", Journal of Geotechnical Engineering, 122(9), pp.760~767 (1996)
- Kumar, S., "Evaluation of Illinois Pulverized Coal Combustion Dry Bottom Ash for Use in Geotechnical Engineering Applications", Journal of Energy Engineering, 129(2), pp.42~55 (2003)
- Lee, H.J., "Shredded Tires and Rubber-Sand as Lightweight Backfill", Journal of Geotechnical and Geoenvironmental Engineering, 125(2), pp.132~141 (1999)
- Moo-Young, H., "Physical and Chemical Properties of Recycled Tire Shreds for Use in Construction", Journal of Environmental Engineering, 129(10), pp.921~929 (2003)
- Pierce, C.E., "Potential of Scrap Tire Rubber as Lightweight Aggregate in Flowable Fill", Waste Management, 23, pp.197~208 (2003)
- Taylor, D.W., "Fundamentals of Soil Mechanics" (1948), John Wiley
- Tsuchida, T., "The Lightweight Treated Soil Method, New Geomaterials for Soft Ground Engineering in Coastal Areas" (2004), A.A. Balkema Publisher
- Tsuchida, T., "Mechanical Properties of Lightweight Geo-Material Used for the Backfill of Quaywalls", Proc. of 31st Conference on Geotechnical Engineering, pp.2525~2528 (1995)
- Tsuchida, T., "Development of Lightweight Fill from Dredging", Proc. of Environmental Geotechnics, pp.415~420 (1996)
- Tweedie, J.J., "Tire Shreds as Retaining Wall Backfill, Active Condition", Journal of Geotechnical and Geoenvironmental Engineering, 124(11), pp.1061~1070 (1998)