구조의 절점 형식에 따른 형상 형성의 거동 특성
Behavior Characteristic of Shaping Formation according to Joint Type of Structures
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper concerned with the behaviour of shaping formation and the erection for SCST structure by cable-tensioning for three kinds of structure models. The joint types of experimental models are ball type joints, bolt type joints with gusset plates, and bolt type joints. The feasibility of the proposed shaping method and the reliability of the established geometric model were confirmed with a nonlinear finite element analysis and an experimental investigation for full size scaled pyramid test model and three kinds of SCST structure models. The characteristic of the behaviour of each joint type is shown in the shaping test for practical design purposes. As a results, the behaviour characteristics of joints is very significant in shaping analysis of space structures. So the joint type should be considered in the design and analysis of the shape formation for space structures. Also, in the special field condition, it could be a fast and economical method for constructing the space structure.
Abstract
This paper concerned with the behaviour of shaping formation and the erection for SCST structure by cable-tensioning for three kinds of structure models. The joint types of experimental models are ball type joints, bolt type joints with gusset plates, and bolt type joints. The feasibility of the proposed shaping method and the reliability of the established geometric model were confirmed with a nonlinear finite element analysis and an experimental investigation for full size scaled pyramid test model and three kinds of SCST structure models. The characteristic of the behaviour of each joint type is shown in the shaping test for practical design purposes. As a results, the behaviour characteristics of joints is very significant in shaping analysis of space structures. So the joint type should be considered in the design and analysis of the shape formation for space structures. Also, in the special field condition, it could be a fast and economical method for constructing the space structure.
참고문헌 (26)
- 김진우, "돔형 공간트러스의 비선형 거동", 한국해양공학회 논문집, 12(4), pp.1~7 (1998)
- 김진우, "돔형 공간트러스의 해석과 실험", 대한토목학회논문집, 20(1-A), pp.39~46 (2000)
- 김진우, "포스트텐션에 의한 공간 트러스의 형성과 극한하중시험", 대한건축학회논문집(구조계), 17(5), pp.51~57 (2001)
- 김진우, "포스트텐션에 의한 격자 돔형 공간 구조의 거동 특성", 한국해양공학회지, 16(1), pp.41~45 (2002), 한국해양공학회
- 김진우, "다방향성 연결구로 구성된 아치형 공간 구조의 형상 형성과 비선형 해석", 대한건축학회논문집 구조계, 21(11), pp.11~18 (2005), 대한건축학회
- Aitziber Lopez, "Numerical Model and Experimental Tests on Single-layer Latticed Domes with Semi-rigid Joints", Computers and Structures, 85, pp.360~374 (2007)
- Calladine, C. R., "Buckminster Fuller's Tensegrity Structures and Clerk Maxwell’s Rule for the Construction of Stiff Frames", Int. J. Solids Struc., 14(3), pp.161~172 (1978)
- Dehdashti, G., "Dome-shaped Space Trusses Formed by Means of Post Tensioning", J. of Str. Eng., 122(10), pp.1240~1245 (1996), ASCE
- El-Sheikh, "Numerical Analysis of Space Trusses with Flexible Member-end Joints", International Journal of Space Structures, 8(3), pp.189~197 (1993)
- Erling A. Smith, "Space Truss Nonlinear Analysis", J. Struc. Engra., 110(4), pp.688~705 (1984), ASCE
- Feng Fan, "Direct Estimation of Critical Load for Single-Layer Recticulated Domes with Semi-Rigid Joints", InternationalJournal of Space Structures, 25(1), pp.15~24 (2010)
- Hoe, T.T., "Ultimate Load Behaviour of Barrel Vault Space Truss", Int. J. of Space Structures, 2, pp.1~10 (1986)
- Kim, J.W., "Analysis and Experiment for the Formation and Ultimate Load Testing of a Hyper Space Truss", J. of Constructional Steel Research, 92, pp.189~193 (2005)
- 김진우, "Influence of Removed Web Members in Shaping Formation for Hypar Space Truss", 한국해양공학회지, 20(2), pp.16~21 (2006), 한국해양공학회
- Kim, J.W., "New Attachment Device for Post-tensioning of Full Size Scale Space Truss", The Eighth East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-8) (2001)
- Jin-WooKim, "Behaviour Characteristic of a Full-Size Scale Pyramidal Space Truss Unit", KSCE Journal of Civil Engineering, 6(1), pp.33~38 (2002), 대한토목학회
- Kim, J.W., "Form Finding and Experiments for Three Types of Space Trusses", pp.711~720 (2002), Space Structures
- Kim, J.W., "Shape Formation of Hypar Space Truss by Cable-Tensioning", International Conference on Textile Composites and Inflatable Structures (Structural Membranes 2003), pp.353~358 (2003)
- Kim, J.W., "Analysis and Experiment for Self-erected Hypar Space Truss", Proceedings of the Second International Conference on Structural Engineering, Mechanics and Computation, pp.365~369 (2004)
- Kim J.W., "Shape Formation of Space Structure with Ball Type Joint", Proceedings of the Joint International Conference on Computing and Decision Making in Civil and Building Engineering (2006)
- Kim J.W., "Analysis and Test for Shaping Formation of Space Truss by means of Cable-tensioning", Proceedings of 6th International Conference Steel and Aluminium Structures, 1, pp.371~378 (2007)
- Kim, J.W., "Test of Deployable Dome-Shaped Space Truss", International Conference on Computing in Civil and Building Engineering (ICCCBE- Ⅷ), 1, pp.66~73 (2000), ASCE
- Koushky, A.L., "Nonlinear Analysis of Double-Layer Grids with Compositive Nodes under Symmetric and Unsymmetrical Gravity Loads", International Journal of Space Structures, 22(2), pp.133~144 (2007)
- Punniyakotty, N.M., "Nonlinear Analysis of Self-Erecting Frameworkby Cable-Tensioning Technique", J. Structural Engineering, 126(3), pp.361~370 (2000)
- Ramm, E., "On Shape Finding Methods and Ultimate Load Analyses of Reinforced Concrete Shells", Engre. Struct., 13(2), pp.178~198 (1991)
- Schmidt, L.C., "Post-tensioned and Shaped Hexagonal Grid Dome: Test and Analysis", Journal of Structural Engineering, 124, pp.696~703 (1999), ASCE