해상 LNG 벙커링 터미널용 파일 가이드 계류 시스템 설계: 싱가포르 항의 사례 연구
Design of Pile-Guide Mooring System for Offshore LNG Bunkering Terminal: A Case Study for Singapore Port
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, a pile-guide mooring system (PGMS) was designed for an offshore liquefied natural gas bunkering terminal (LNG-BT), which is an essential infrastructure for large LNG-fuelled ships. The PGMS consisted of guide piles to restrict five motions of the floater, except for heave, as well as a seabed truss structure to support the guide piles and foundation piles to fix the system to the seabed. Singapore port was considered for a case study because it is a highly probable ports for LNG bunkering projects. The wave height, current speed, and wind speed in Singapore port were investigated to calculate the environmental loads acting on the hull and PGMS. A load and resistance factor approach was used for the structural design, and a finite element analysis was performed for design verification. The steel usage of the PGMS was analyzed and compared with the material usage of a gravity-based structure under similar LNG capacity and water depth criteria. This paper also describes the water depth limit and wave conditions of the PGMS based on estimation of the initial investment and the present value profit difference. It suggests a suitable LNG-BT support system for various design conditions.
Abstract
In this study, a pile-guide mooring system (PGMS) was designed for an offshore liquefied natural gas bunkering terminal (LNG-BT), which is an essential infrastructure for large LNG-fuelled ships. The PGMS consisted of guide piles to restrict five motions of the floater, except for heave, as well as a seabed truss structure to support the guide piles and foundation piles to fix the system to the seabed. Singapore port was considered for a case study because it is a highly probable ports for LNG bunkering projects. The wave height, current speed, and wind speed in Singapore port were investigated to calculate the environmental loads acting on the hull and PGMS. A load and resistance factor approach was used for the structural design, and a finite element analysis was performed for design verification. The steel usage of the PGMS was analyzed and compared with the material usage of a gravity-based structure under similar LNG capacity and water depth criteria. This paper also describes the water depth limit and wave conditions of the PGMS based on estimation of the initial investment and the present value profit difference. It suggests a suitable LNG-BT support system for various design conditions.
참고문헌 (27)
- Ahn, J. K., "Design of a Prismatic Pressure Vessel with Internal X-beam Structures for Application in ships", Ships and Offshore Structures, 12(6), pp.781~792 (2017)
- ANSYS, "AQWA Theory Manual Release 15.0", ANSYS Inc, ~ (2013)
- Barker, M., "Bridge Economy and Life Cycle Costs of Steel & Concrete Bridges", NACE 2017 Short Span Steel Bridge Workshop (2017)
- De Vries, W., "Final Report WP 4.2 Support Structure Concepts for Deep Water Sites", pp.2007
- Det Norske Veritas and Germanischer Lloyd, "DNV-OS-C101. Design of Offshore Steel Structures", ~ (2011)
- DNV Report; Shipping 2020, "Det Norske Veritas and Germanischer Lloyd", ~ (2012)
- England, L. T., "A Comparison Between Turret and Spread Moored F(P)SOs for Deepwater Field Developments", Deep Offshore Technology 2001 (2001)
- International Maritime Organization, "International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk. Chapter 15: Filling Limits for Cargo Tanks", ~ (2006)
- 정원도, "스트레인 게이지를 이용한 C-type LNG Mock-up 탱크 내조 실 변형 거동 측정", 한국해양공학회지, 30(2), pp.117~124 (2016), 한국해양공학회
- 김기동, "해상부유식 LNG 벙커링 터미널 시범사업을 위한 울산항 LNG 벙커링 수요전망에 관한 연구", 한국가스학회지, 21(1), pp.65~71 (2017), 한국가스학회[DOI]
- 김근섭, "부산항의 LNG 벙커링 가격 경쟁력 확보 방안", 한국항만경제학회지, 32(1), pp.123~133 (2016), 한국항만경제학회
- Weekly report of Korea Maritime Institute, "Kim, G.S", 19~ (2017)
- Lee, S. Y., "Life-cycle Cost-based Design Procedure to Determine the Optimal Environmental Design Load and Target Reliability in Offshore Installations", Structural Safety, 59, pp.96~107 (2016)
- Singapore Tide Tables Year 2013, "Maritime and Port Authority of Singapore", Hydrographic Department of MPA, ~ (2013)
- "Port Statistics" (2012)[URL]
- Report of the Marine Environment Protection Committee on Its 70th Session, "Marine Environment Protection Committee", ~ (2016)
- Naciri, M., "Time Domain Simulations of Side-by-side Moored Vessels Lessons Learnt from a Benchmark Test", Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering (2007)
- National Environment Agency, "Weatherwise Singapore", ~ (2009)
- 박병원, "병렬 배치된 FLBT 및 LNG-BS에 작용하는 풍하중 및 조류하중에 대한 풍동 시험 및 경험식 비교 연구", 한국해양공학회지, 31(4), pp.266~273 (2017), 한국해양공학회
- Ryu, S., "Mooring Cost Optimization via Harmony Search", Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering (2007)
- Sund, K., "Gas Prices Today and Going Forward (Wholesale Prices and the Impact on Retail Prices for LNG as Bunkering Fuel)", MarTech LNG Value Chain Development Seminars (2014)
- Thoft-Christensen, P., "Infrastructures and Life-Cycle Cost-Benefit Analysis", Structure & Infrastructure Engineering, 8(5), pp.507~516 (2012)
- Van Wijngaarden, M., "Concept Design of Steel Bottom Founded Support Structures for Offshore Wind Turbines", pp.2013
- Waters, L. B., "Design and Construction of Gravity Based Structure and Modularized LNG Tanks for the Adriatic LNG Terminal", ~ (2007)
- Yun, S., "Conceptual Design of an Offshore LNG Bunkering Terminal: a Case Study of Busan Port", Journal of Marine Science and Technology, 20, pp.226~237 (2015)
- 윤상국, "LNG 벙커링용 고효율 LNG 저장탱크 열해석", 한국마린엔지니어링학회지, 39(9), pp.876~880 (2015), 한국마린엔지니어링학회[DOI]
- Zhang, D, "Numerical Simulation of Large-scale Waves and Currents", Master, Department of Civil Engineering, pp.2004