굽은 형상을 가지는 라이저 주위 유동 특성에 관한 연구
Numerical Study on Flow Characteristics Around Curved Riser
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The flow around a curved riser exposed to the current in various directions was investigated at a Reynolds number of 100 using a numerical simulation. The present study found that the flow features of the curved riser were distinct from those of a straight riser as a result of its large radius of curvature. Namely, there were various wake patterns according to the flow’s incident angle. As the incident angle increased from 0° to 90°, a two-row street of vortices that developed along the centerline of the curved riser became more apparent. However, when the incident angle approached 180° from 90°, these vortices were completely suppressed by the interaction between the wake and an axial flow induced by the curvature of the riser. To identify this feature, the sectional force coefficients were also considered, and it was found that the force coefficients could be different from those found in a sectional analysis based on the strip theory when investigating vortex-induced vibration. As a result, this kind of study would be important to realistically estimate the riser VIV (vortex-induced vibration) and fatigue life, and a new force coefficient database that includes the three-dimensional effect should be established.
Abstract
The flow around a curved riser exposed to the current in various directions was investigated at a Reynolds number of 100 using a numerical simulation. The present study found that the flow features of the curved riser were distinct from those of a straight riser as a result of its large radius of curvature. Namely, there were various wake patterns according to the flow’s incident angle. As the incident angle increased from 0° to 90°, a two-row street of vortices that developed along the centerline of the curved riser became more apparent. However, when the incident angle approached 180° from 90°, these vortices were completely suppressed by the interaction between the wake and an axial flow induced by the curvature of the riser. To identify this feature, the sectional force coefficients were also considered, and it was found that the force coefficients could be different from those found in a sectional analysis based on the strip theory when investigating vortex-induced vibration. As a result, this kind of study would be important to realistically estimate the riser VIV (vortex-induced vibration) and fatigue life, and a new force coefficient database that includes the three-dimensional effect should be established.
참고문헌 (19)
- Assi, G. R. S., "Experimental Investigation of the Flow-induced Vibration of a Curved Cylinder in Convex and Concave configurations", Journal of Fluids and Structures, 44, pp.52~66 (2014)[DOI]
- de Vecchi, A., "Wake Dynamics of External Flow Past a Curved Circular cylinder with the Free-stream Aligned to the Plane of Curvature", Journal of Fluids and Structures, 24(8), pp.1262~1270 (2008)[DOI]
- Franke, R., "Numerical Calculation of Laminar Vortex-shedding Flow Past Cylinders", Journal of Wind Engineering and Industrial Aerodynamics, 35, pp.237~257 (1990)[DOI]
- Gallardo, J. P., "Turbulent Wake behind a Curved Circular Cylinder", Journal of Fluid Mechanics, 742, pp.192~229 (2014)[DOI]
- Gallardo, J. P., "Coherence and Reynolds Stresses in the Turbulent Wake behind a Curved Circular Cylinder", Journal of Turbulence, 15(12), pp.883~904 (2014)[DOI]
- Jeong, J., "On the Identification of a Vortex", Journal of Fluid Mechanics, 285, pp.69~94 (1995)[DOI]
- Jiang, F., "Influences of Upstream Extensions on Flow Around a Curved Cylinder", European Journal of Mechanics-B, 2018, pp.67, 79~86
- B-spline Methods and Zonal Grids for Numerical Simulations of Turbulent Flows, "Kravchenko, A. G.", Flow Physics and Computational Division, Department of Mechanical Engineering, Stanford University, ~, pp.Report TF-73 (1998)
- Li, Y., "Prediction of Vortex Shedding from a Circular Cylinder Using a Volumetric Lattice-Boltzmann Boundary Approach", The European Physical Journal Special Topics, 171(1), pp.91~97 (2009)[DOI]
- Mittal, S., "Excitation of Shear Layer Instability in Flow Past a Cylinder at Low Reynolds Number", International Journal for Numerical Methods in Fluids, 49(10), pp.1147~1167 (2005)[DOI]
- Miliou, A., "Fluid Dynamic Loading on Curved Riser Pipes", Journal of Offshore Mechanics and Arctic Engineering, 125(3), pp.176~182 (2003)[DOI]
- Milliou, A., "Wake Dynamics of External Flow Past a Curved Circular Cylinder with the Free Stream Aligned with the Plane of Curvature", Journal of Fluid Mechanics, 592, pp.89~115 (2007)[DOI]
- Qu, L., "Quantitative Nmerical Aalysis of Fow Past a Circular Cylinder at Reynolds Number between 50 and 200", Journal of Fluids and Structures, 39, pp.347~370 (2013)[DOI]
- 박성종, "심해 라이저의 와류유기 진동해석", 한국해양공학회지, 31(5), pp.364~370 (2017), 한국해양공학회[DOI]
- Park, J., "Numerical Solutions of Flow Past a Circular Cylinder at Reynolds Numbers up to 160", KSME International Journal, 12(6), pp.1200~1205 (1998)[DOI]
- Posdziech, O., "A Systematic Approach to the Numerical Calculation of Fundamental Quantities of the Two-dimensional Flow over a Circular Cylinder", Journal of Fluids and Structures, 23(3), pp.479~499 (2007)[DOI]
- Shi, J. M., "Heating Effect on Steady and Unsteady Horizontal Laminar Flow Past a Circular Cylinder", Physics of Fluids, 16(12), pp.4331~4345 (2004)[DOI]
- Stålberg, E., "High Order Accurate Solution of Flow Past a Circular Cylinder", Journal of Scientific Computing, 27(1-3), pp.431~441 (2006)[DOI]
- Williamson, C. H. K., "Vortex Dynamics in the Cylinder Wake", Annual Review of Fluid Mechanics, 28, pp.477~539 (1996)[DOI]