Designation of the Boundary Conditions for Estimating the Thrust Loss due to Thruster-Hull Interactions
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The azimuth thruster is mainly installed on a vessel that requires a dynamic positioning (DP) function for special purposes. When the azimuth thruster on a vessel operates for DP, the thrust loss is induced by the thruster-hull interaction. This study examined the influence of boundary conditions in numerical simulations for predicting thrust loss. Wind turbine installation vessels (WTIV) and floating production storage and offloading (FPSO) were chosen as a target vessels. In this study, two types of boundaries were defined. The first consideration is that the boundary condition was assigned with consideration of the azimuth angle of the thruster, whereas it is fixed regardless azimuth angle of the thruster. The predicted thrust loss according to these boundary conditions showed a difference. This observation originated from the current load of the vessel. Therefore, the boundary conditions for which the current load is not induced need to be designated to obtain a realistic thrust loss in a numerical simulation.
Abstract
The azimuth thruster is mainly installed on a vessel that requires a dynamic positioning (DP) function for special purposes. When the azimuth thruster on a vessel operates for DP, the thrust loss is induced by the thruster-hull interaction. This study examined the influence of boundary conditions in numerical simulations for predicting thrust loss. Wind turbine installation vessels (WTIV) and floating production storage and offloading (FPSO) were chosen as a target vessels. In this study, two types of boundaries were defined. The first consideration is that the boundary condition was assigned with consideration of the azimuth angle of the thruster, whereas it is fixed regardless azimuth angle of the thruster. The predicted thrust loss according to these boundary conditions showed a difference. This observation originated from the current load of the vessel. Therefore, the boundary conditions for which the current load is not induced need to be designated to obtain a realistic thrust loss in a numerical simulation.
참고문헌 (9)
- Cozijn, H, "Analysis of the velocities in the wake of an azimuthin thruster, using PIV measurements and CFD calculations", Dynamic Positioning Conference (2010)
- Dang, J, "Hydrodynamic aspects of steerable thrusters", Dynamic Positioning Conference (2004)
- Funeno, I, "Hydrodynamic optimal design of ducted azimuth thrusters", First International Sympousium on Marine Propulsion, SMP09 (2009)
- Thruster interaction effect, "Lehn, E", The Ship Research Institute of Norway, ~, pp.NSFI Report-102.80 (1980)
- Nienhuis, U, "Analysis of thruster effectivity for dynamic positioning and low speed manoeuvring", Doctor, pp.1992
- Ottens, H, "Benchmark study onthruster-hull interaction on a semi-submergible crane vessel", Proceedings of the ASME 2011 30th International Conference on Ocean, pp.297~307 (2011)
- Palm, M, "Comparison of thruster axis tilting versus nozzle tiling on the propeller-hull interactions for a drillship at DP-condition", Dynamic Positioning Conference (2010)
- Song, G. S, "The investigation for interaction phenomenon of azimuth thruster on ship", Proceedings of the PRADS2013 (2013)
- Song, G. S, "The study of thrust loss by thruster-hull interaction on azimuth thruster", Proceedings of the 12th National Congress on Fluids Engineering (2022)