Shock-Resistance Responses of Frigate Equipments by Underwater Explosion
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Three-dimensional finite element analysis (3D-FEA) models have been used to evaluate the shock-resistance responses of various equipments, including armaments mounted on a warship caused by underwater explosion (UNDEX). This paper aims to check the possibility of using one-dimensional (1D) FEA models for the shock-resistance responses. A frigate was chosen for the evaluation of the shock-resistance responses by the UNDEX. The frigate was divided into the thirteen discrete segments along the length of the ship. The 1D Timoshenko beam elements were used to model the frigate. The explosive charge mass and the stand-off distance were determined based on the ship length and the keel shock factor (KSF), respectively. The UNDEX pressure fields were generated using the Geers-Hunter doubly asymptotic model. The pseudo-velocity shock response spectrum (PVSS) for the 1D-FEA model (1D-PVSS) was calculated using the acceleration history at a concerned equipment position where the digital recursive filtering algorithm was used. The 1D-PVSS was compared with the 3D-PVSS that was taken from a reference, and a relatively good agreement was found. In addition, the 1D-PVSS was compared with the design criteria specified by the German Federal Armed forces, which is called the BV043. The 1D-PVSS was proven to be relatively reasonable, reducing the computing cost dramatically.
Abstract
Three-dimensional finite element analysis (3D-FEA) models have been used to evaluate the shock-resistance responses of various equipments, including armaments mounted on a warship caused by underwater explosion (UNDEX). This paper aims to check the possibility of using one-dimensional (1D) FEA models for the shock-resistance responses. A frigate was chosen for the evaluation of the shock-resistance responses by the UNDEX. The frigate was divided into the thirteen discrete segments along the length of the ship. The 1D Timoshenko beam elements were used to model the frigate. The explosive charge mass and the stand-off distance were determined based on the ship length and the keel shock factor (KSF), respectively. The UNDEX pressure fields were generated using the Geers-Hunter doubly asymptotic model. The pseudo-velocity shock response spectrum (PVSS) for the 1D-FEA model (1D-PVSS) was calculated using the acceleration history at a concerned equipment position where the digital recursive filtering algorithm was used. The 1D-PVSS was compared with the 3D-PVSS that was taken from a reference, and a relatively good agreement was found. In addition, the 1D-PVSS was compared with the design criteria specified by the German Federal Armed forces, which is called the BV043. The 1D-PVSS was proven to be relatively reasonable, reducing the computing cost dramatically.
참고문헌 (15)
- American Bureau of Shipping (ABS), "Guidance Notes on Ship Vibration" (2021), ABS
- Building Specification for Ships of the Federal Armed Forces (BV), "Shock Resistance Experimental and Mathematical Proof (BV043)", ~ (1985)
- Bae, S. W, "Structural Safety Analysis of Propulsion Motors by BV043", Proceedings of the Korean Society for Noise and Vibration Engineering Conference, pp.254~255 (2009)
- Geers, T. L, "An Integrated Wave-Effects Model for an Underwater Explosion Bubble", Journal of Acoustic Society of America, 111(4), pp.1584~1601 (2002)[DOI]
- 김재부, "가스터빈 패키지 내충격 성능평가에 관한 연구", 대한기계학회논문집 A, 41(10), pp.1005~1009 (2017), 대한기계학회
- 김현우, "수중 폭발에 의한 함체의 비탄성 휘핑 응답에 관한 연구", 대한조선학회 논문집, 58(6), pp.400~406 (2021), 대한조선학회[DOI]
- 이성욱, "동적설계해석과 과도응답해석을 이용한 함정용 대형 전동기의 내충격성 평가", 한국기계가공학회지, 9(5), pp.76~82 (2010), 한국기계가공학회
- Lee, J.B, "A Study on Shock Resistance Evaluation of Steering Units for a War Vessel byUusing Dynamic Design Analysis Method", Master, pp.2012
- 정준모, "수중 폭발 시뮬레이션을 위한 경계 요소법 기반의 수치 해석 기법 연구", 대한조선학회 논문집, 57(5), pp.271~277 (2020), 대한조선학회[DOI]
- Naval Sea System Command (NAVSEA), "Test Plan for Routine Shock Testing of Ships" (1976), NAVSEA
- Naval Sea System Command (NAVSEA), "Shock Design Criteria for Surface Ships" (1995), NAVSEA
- Scavuzzo, R. J, "Principles and Techniques of Shock Data Analysis" (1996), Booz Allen Hamilton
- Seong, J, "A Study on Shock Resistance Evaluation of Equipment for a Naval Ship by Using BV-043", The Korean Society of Mechanical Engineers, pp.1361~1366 (2015)
- Simulia, "Abaqus User Manual" (2018), Dassault Systemes Simulia Corp
- Smallwood, D.O, "An Improved Recursive Formula for Calculating Shock Response Spectra", Shock and Vibration Bulletin, 51(2), pp.211~217 (1980)