A preparation and performance study of glass-ceramic glazes derived from blast furnace slag and fly ash
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Glass-ceramic glazes have been prepared successfully via crystallization from blast-furnace slag (BFS), fly ash (FA) fluxed with potash feldspar and borax. The crystalline behavior of glass-ceramic glazes was investigated using differential thermal analysis and thermogravimetric analysis (DTA/TG), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results revealed that the major crystalline phases are anorthite (CaAl2Si2O8) and akermanite (Ca2MgSi2O7) and crystalline phases disperse well in glassy phases with a uniform size of 1 μm. Glass-ceramic glazes possess low density, low water absorption,perfect stain resistance, acid resistance and alkali resistance. The thermal expansion coefficient of glass-ceramic glazes is steady up to 800 oC with an average value of 7.2 × 10−6 /K. Final results suggest that BFS and FA have potential to be vitrified into economically and environmentally low-cost glass-ceramic glaze materials.
Abstract
Glass-ceramic glazes have been prepared successfully via crystallization from blast-furnace slag (BFS), fly ash (FA) fluxed with potash feldspar and borax. The crystalline behavior of glass-ceramic glazes was investigated using differential thermal analysis and thermogravimetric analysis (DTA/TG), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results revealed that the major crystalline phases are anorthite (CaAl2Si2O8) and akermanite (Ca2MgSi2O7) and crystalline phases disperse well in glassy phases with a uniform size of 1 μm. Glass-ceramic glazes possess low density, low water absorption,perfect stain resistance, acid resistance and alkali resistance. The thermal expansion coefficient of glass-ceramic glazes is steady up to 800 oC with an average value of 7.2 × 10−6 /K. Final results suggest that BFS and FA have potential to be vitrified into economically and environmentally low-cost glass-ceramic glaze materials.
참고문헌 (23)
- Z. Jing, , Cem.Concr.Res, 38(7), pp.976~982 (2008)
- G.-Y.Li, , Cem.Concr.Compos, 25(3), pp.293~299 (2003)
- C.M.F. Vieira, , Matéria (Rio J.), 14(3), pp.881~905 (2009)
- K.Luke, , J.Am.Ceram.Soc, 91(12), pp.4084~4092 (2008)
- J.-E. Oh, , Cem.Concr.Res, 40(2), pp.189~196 (2010)
- R.A. Aguilar, , Constr.Build.Mater, 24(7), pp.1166~1175 (2010)
- T.G.Mahmoud, , Chem.Biodiversit, 7(4), pp.878~886 (2010)
- M.D. Lepech, , in Proceedings of the 1st International Symposium of the International Association for Life-Cycle Civil Engineering, pp.837~842 (2008)
- I.Yüksel, , Build.Environ, 42(7), pp.2651~2659 (2007)
- D.S.Klimesch, , J.Therm.Anal.Calorim, 75(1), pp.197~204 (2004)
- H.-Y. Liu, , Ceram.Int, 35(8), pp.3181~3184 (2009)
- K.C. Vasilopoulos, , Ceram.Int, 35(2), pp.555~558 (2009)
- K.C. Vasilopoulos, , Adv.Appl.Ceram, 108(1), pp.27~32 (2009)
- K. Dana, , Ceram.Int, 31(1), pp.147~152 (2005)
- H.-T. Shen, , Waste Manage, 23(4), pp.933~949 (2003)
- Z. Jing, , Cem.Concr.Res, 38(7), pp.976~982 (2008)
- J.J. Reinosa, , Ceram.Int, 36(6), pp.1845~1850 (2010)
- A. Majumdar, , Bull.Mater.Sci, 24(1), pp.69~77 (2001)
- B.E. Yekta, , J.Eur.Ceram.Soc, 27(5), pp.2311~2315 (2007)
- D.A. Duke, , J.Am.Ceram.Soc, 51(2), pp.98~101 (2006)
- K. Pekkan, , J.Mater.Sci, 44(10), pp.2533~2540 (2009)
- K. Pekkan, , J.Eur.Cer.Soc, 29(9), pp.1571~1578 (2009)
- "GB", T 3810.13-1999 13, 14