Optimization of Operational and Constitutional Geometric Parameters for Thermoaoustic Energy Output
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The effects of geometric parameters (stack position, stack length, resonator tube length) and varying input power over acoustic energy output were investigated. The acoustic laser kit (Garret 2000) was used for the construction of TA lasers. A series of sound pressure level measurements in different orientations did not differ significantly confirming that the sound wave generated could be assumed as a spherical wave. An increase in acoustic pressure was recorded with respective increase in input power, stack and resonator tube lengths owing to their relative influence over heat transfer rate and critical temperature gradient across the stack.
Abstract
The effects of geometric parameters (stack position, stack length, resonator tube length) and varying input power over acoustic energy output were investigated. The acoustic laser kit (Garret 2000) was used for the construction of TA lasers. A series of sound pressure level measurements in different orientations did not differ significantly confirming that the sound wave generated could be assumed as a spherical wave. An increase in acoustic pressure was recorded with respective increase in input power, stack and resonator tube lengths owing to their relative influence over heat transfer rate and critical temperature gradient across the stack.
참고문헌 (14)
- Rayleigh, "The explanation of certain acoustical phenomena", Nature, 18, pp.319~321 (1878)
- Rott, N., "Thermo acoustics", Advances in Applied Mechanics, 20, pp.135~175 (1980)
- Feldman Jr, K. T., "Review of the literature on Sondhauss thermo acoustic phenomena", J Sound and Vibration, 7(1), pp.71~82 (1968)
- Swift, G, "Thermo acoustic Engines", J Acoustical Society of America, 84, pp.1145~1180 (1968)
- Lampe, R., "Design and Testing of Rapid Prototyped Stacks for Thermo acoustic Applications", Proceedings of The National Conference on Undergraduate Research (NCUR), pp.1~8 (2008)
- Kim, Y.T., "Optimum Positions of a Stack in a Thermo acoustic Heat Pump", J Korean Physical Society;, 36(5), pp.279~286 (2000)
- Wheatley, J., "An intrinsically irreversible thermo acoustic heatengine", J. Acoust. Soc. Am, 74(1), pp.153~170 (1983)
- Fahey, D., "Thermo acoustic oscillations in cryogenics. Part3 : avoiding and damping of oscillations", Cryogenics, 32(8), pp.703~706 (1992)
- Tijani, M. E. H., "The optimalstack spacing for thermo acoustic refrigeration", J Acoustical Society of America2002;, 112(1), pp.128~ (2002)
- Garrett, S. L., "The Power of Sound", Sigma Xi, 88(6), pp.516~525 (2000), The Scientific Research Society
- Kwon, Y. S., "Study of Thermo acoustic Engines Operating at Frequencies between 2 KHz and 25 KHz", Ph.D., pp.1996
- Garrett, S.L., "Acoustic laser kit instructions" (2005), Applied Research Laboratory, Penn State University
- Kline, S. J., "Describing Uncertainties in Single-Sample Experiments", J. Mech. Eng, 75, pp.3~8 (2005)
- Chen K, "Acoustic energy output and coupling effect of apair of thermo acoustic lasers", Int. J. Energy Research, 36(4), pp.477~785 (2011)