마이크로 채널 관에서의 응축 열전달 성능에 관한 연구
A study on condensation heat transfer performance in microchannel tube
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study conducted a research as to condensation heat transfer by using three types of flat micro multi-channel tubes with different processing of micro-fin and number of channels inside the pipes and different sizes of appearances. In addition, identical studies were conducted by using smoothing circular tubes with 5mm external diameter to study heat transfer coefficient. The condensation heat transfer coefficient showed an increase as the vapor quality and mass flux increased. However, each tube shows little differences compared to 400kg/m2s or identical in case the mass flux are 200kg/m2s and 100kg/m2s. The major reason for these factors is increase-decrease of heat transfer area that the flux type of refrigerant is exposed to the coolant’s vapor with the effect of channel aspect ratio or micro-fin. In addition, the heat transfer coefficient was unrelated to the heat flux, and shows a rise as the saturation temperature gets lower, an effect that occurs from enhanced density. The physical factor of heat transfer coefficient increased as the channel’s aspect ratio decreased. Additionally, the micro pin at the multi-channel type tube is decided as a disadvantageous factor to condensation heat enhancement factor. That is, due to the effect of aspect ratio or micro-fin, the increase-decrease of heat transfer area that the flux type of a refrigerant is exposed to the vapor is an important factor.
Abstract
This study conducted a research as to condensation heat transfer by using three types of flat micro multi-channel tubes with different processing of micro-fin and number of channels inside the pipes and different sizes of appearances. In addition, identical studies were conducted by using smoothing circular tubes with 5mm external diameter to study heat transfer coefficient. The condensation heat transfer coefficient showed an increase as the vapor quality and mass flux increased. However, each tube shows little differences compared to 400kg/m2s or identical in case the mass flux are 200kg/m2s and 100kg/m2s. The major reason for these factors is increase-decrease of heat transfer area that the flux type of refrigerant is exposed to the coolant’s vapor with the effect of channel aspect ratio or micro-fin. In addition, the heat transfer coefficient was unrelated to the heat flux, and shows a rise as the saturation temperature gets lower, an effect that occurs from enhanced density. The physical factor of heat transfer coefficient increased as the channel’s aspect ratio decreased. Additionally, the micro pin at the multi-channel type tube is decided as a disadvantageous factor to condensation heat enhancement factor. That is, due to the effect of aspect ratio or micro-fin, the increase-decrease of heat transfer area that the flux type of a refrigerant is exposed to the vapor is an important factor.
참고문헌 (18)
- Webb, R. L., "Oval Finned Tube Condenser and Design Pressure Limits", J. Enhanced Heat Transfer, 8, pp.147~158 (2001)
- 김내현, "Dry and wet air-side performance of a louver-finned heat exchanger having flat tubes", Journal of Mechanical Science and Technology, 24(7), pp.1553~1561 (2010), 대한기계학회
- R. L. Webb, "Principles of Enhanced Heat Transfer" (2005), Taylor and Francis Pub.
- S. LAOHALERTDECHA, "A REVIEW ON THE HEAT-TRANSFER PERFORMANCE AND PRESSURE-DROP CHARACTERISTICS OF VARIOUS ENHANCED TUBES", International Journal of Air-Conditioning and Refrigeration, 20(4), pp.1~20 (2012), 대한설비공학회[DOI]
- John R Thome, "Boiling of new refrigerants: a state-of-the-art review", International Journal of Refrigeration, 19(7), pp.435~457 (1996), Elsevier BV[DOI]
- K. Fujie, "Heat Transfer Pipe", US Patent 4044479, ~ (1977)
- Y. Shinohara, "Development of an Improved Thermofin Tube", Hitachi Cable Review, 4, pp.47~50 (1985)
- K. Yasuda, "Development of Condensing Thermofin HEX-C Tube", Hitachi Cable Review, 9, pp.27~30 (1990)
- Wilson, E. E., "A Basis for Rational Design of Heat Transfer Apparatus", Trans. ASME, 37, pp.47~70 (1915)
- Boyko, L. D., "Heat transfer and hydraulic resistance during condensation of steam in a horizontal tube and in a bundle of tubes", Int. J. Heat Mass Trans., 10(3), pp.361~373 (1967)
- Cavallini, A., "Condensation of halogenated refrigerants inside smooth tubes", HVAC and R Research, 8(4), pp.429~451 (2002)
- Chato, J. C., "Laminar condensation inside horizontal and inclined tubes", ASHRAE J, 4(2), pp.52~60 (1962)
- Dobson, M. K., "Condensation in smooth horizontal tubes", J. Heat Trans., Transac.ASME, 120(1), pp.193~213 (1998)
- Moser, K.W., "A new equivalent Reynolds number model for condensation in smooth tubes", Transac. ASME, J. Heat Trans., 120(2), pp.410~417 (1998)
- Shah, M. M., "A general correlation for heat transfer during film condensation inside pipes", Int. J. Heat Mass Trans., 22(4), pp.547~556 (1979)
- Soliman, H. M., "A general heat transfer correlation for annular flow condensation", J. Heat Trans., 90, pp.267~276 (1968)
- Soliman, H. M., "Mist–annular transition during condensation and its influence on the heat transfer mechanism", Int. J. Multiphase Flow, 12(2), pp.277~288 (1986)
- Traviss, D. P., "Forced-convection condensation inside tubes: a heat transfer equation for condenser design", ASHRAE Transac., 79(1), pp.157~165 (1973)