양면 마이크로 패턴 차량용 후육 라이트 가이드의 사출성형 패턴 전사성에 관한 연구
Study of injection molded pattern transferability of double-sided micro-patterned automotive thick light guides
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we investigated the injection molding technology of thick-walled light guides, which are parts that control the light source of automotive lamps. Through injection molding analysis, the gate position that can minimize product shrinkage and deformation was selected, and a mold reflecting the analysis results was manufactured to evaluate the effect of injection speed and holding pressure on transferability during micro-pattern molding through experiments. When designing an injection mold for products with varying thicknesses, it was found that installing the gate on the side of the thicker part was advantageous for reducing volume shrinkage and deformation. It was found that the effect of shrinkage due to thickness may be greater than the position of the gate on pattern transferability. The pattern transfer error decreased as the injection speed and holding pressure increased, and it was found that increasing the injection speed was relatively effective.
Abstract
In this study, we investigated the injection molding technology of thick-walled light guides, which are parts that control the light source of automotive lamps. Through injection molding analysis, the gate position that can minimize product shrinkage and deformation was selected, and a mold reflecting the analysis results was manufactured to evaluate the effect of injection speed and holding pressure on transferability during micro-pattern molding through experiments. When designing an injection mold for products with varying thicknesses, it was found that installing the gate on the side of the thicker part was advantageous for reducing volume shrinkage and deformation. It was found that the effect of shrinkage due to thickness may be greater than the position of the gate on pattern transferability. The pattern transfer error decreased as the injection speed and holding pressure increased, and it was found that increasing the injection speed was relatively effective.
참고문헌 (10)
- Lee, D. W., "An Analysis of the Technology Market for Development of LED Head lamps for Vehicles", Korea Institute of Science and Technology Information, pp.5~47 (2013)
- Gebauer, M., "Light guide technology in headlamps and rear lamps", Auto Technology, 6, pp.34~37 (2006)[DOI]
- Do, Y., "Surface characteristics on the optical pattern die of light guiding plate by machining types", Journal of the Korea Society of Die &Mold Engineering, 2(4), pp.1~4 (2008)
- Hwang, C. J., "Replication of concave and convex microlens array of light guide plate for liquid crystal display in injection molding", Journal of the Korea Society of Die & Mold Engineering, 2(2), pp.29~32 (2008)
- Lee, K. M., "Study on the effects of injection mold temperature on the micro-pyramid pattern", Proceeding of Korean Society for Precision Engineering Spring Conference, 2013(5), pp.295~296 (2013)
- Kim, T. H., "A study on the micro pattern replication difference in injection molding", Journal of the Korea Society of Die & Mold Engineering, 2(4), pp.48~53 (2008)
- 권오경, "마이크로 패턴을 가진 초박육 사출성형의 성형성 개선", 대한기계학회논문집 A, 31(5), pp.556~561 (2007), 대한기계학회
- Lin, T. H., "Luminance of injection‐molded V‐groove light guide plates", Polymer Engineering & Science, 48(8), pp.1615~1623 (2008)
- Tofteberg, T. R., "Effects of Injection Molding Holding Pressure on the Replication of Surface Microfeatures", International Polymer Processing, 25(3), pp.236~241 (2010)[DOI]
- 박치열, "마이크로 패턴 성형을 위한 인서트 코어 적용 µ-PIM 표준금형 개발에 관한 연구", Design & Manufacturing, 11(3), pp.29~34 (2017), 한국금형공학회