앉은 자세에서 일어날 때 비탄력 테이핑을 이용한 무릎뼈의 아래 안쪽 활주가 안쪽넓은근과 가쪽넓은근의 근활성도에 미치는 영향
Effect of inferomedial gliding of patella using non-eleastic taping on muscle activity of vastus medialis and vastus lateralis during sit to stand
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
본 연구의 목적은 앉은 자세에서 일어날 때 비탄력 테이핑을 이용한 무릎뼈의 안쪽 활주와 아래 안쪽 활주가 안쪽넓은근과 가쪽넓은근의 근활성도 비율에 미치는 영향에 대해 알아보고자 하는 것이었다. 측정 결과, 안쪽 활주와 비교하여 아래 안쪽 활주를 적용했을 때 안쪽넓은근의 근활성도가 전체 근활성도 대비 비율이 더 높게 나타나는 것을 확인할 수 있었다. 무릎뼈의 안쪽 활주보다 아래 안쪽 활주가 무릎관절의 안정성에 더 큰 기여를 하며, 특히 무릎넙다리 통증증후군의 증상 완화 및 예방에 효과적일 것으로 사료된다. 이와 관련하여 무릎뼈를 아래 안쪽 방향으로 활주 시킬 수 있는 보조기 및 운동복 등의 개발은 무릎관절의 건강을 확보할 수 있는 새로운 방법이 될 것으로 기대한다.
Abstract
The purpose of this study was to investigate of effect of medial & inferior gliding of patella using non-elastic taping on muscle activation of vastus medialis & vastus lateralis during sit to st&ing. As a result of measure, it was confirmed that the muscle activity of vastus medialis is higher than total muscle activity when the inferomedial gilding compared to the medial gliding. The medial & downward gliding of patella more stable than medial direction. especially it will be effective on prevent or control of Patellofemoral pain syndrome. In this regard, the development of orthosis & sportswear for inferomedial gliding to patella will be efficiency to maintain healthy the knee joint.
참고문헌 (19)
- Jo Nijs, "Diagnostic value of five clinical tests in patellofemoral pain syndrome", Manual Therapy, 11(1), pp.69~77 (2006), Elsevier BV[DOI]
- 김명수, "디지털 시대에 융복합적인 웰니스를 위한 걷기 운동의 효과 - 신체활동 중심으로 -", 디지털융복합연구, 13(5), pp.365~374 (2015), 한국디지털정책학회[DOI]
- K. Cerny, "Vastus medialis oblique", vastus lateralis muscle activity ratios for selected exercises in persons with & without patellofemoral pain syndrome, 1995, pp.75(8), 672~683
- H H Huberti, "Patellofemoral contact pressures. The influence of q-angle and tendofemoral contact.", The Journal of Bone & Joint Surgery, 66(5), pp.715~724 (1984), Ovid Technologies (Wolters Kluwer Health)[DOI]
- R. A. Berger, "Total body dynamics in ascending stairs & rising from a chair following total knee arthroplasty", Proceedings of Trans 34th A Mtg Orthop Res Soc, pp.542~ (1988)
- 조상희, "무릎넙다리통증증후군 환자에서 무릎관절 각도별 스쿼트 융합운동이 넙다리네갈래근의 근력에 미치는 효과", 한국융합학회논문지, 7(2), pp.43~52 (2016), 한국융합학회[DOI]
- 이성은, "The effect of McConnell taping on vastus medialis and lateralis activity during squatting in adults with patellofemoral pain syndrome", Journal of exercise rehabilitation, 9(2), pp.326~330 (2013), 한국운동재활학회[DOI]
- Martin Whittingham, "Effects of Taping on Pain and Function in Patellofemoral Pain Syndrome: A Randomized Controlled Trial", Journal of Orthopaedic & Sports Physical Therapy, 34(9), pp.504~510 (2004), Journal of Orthopaedic & Sports Physical Therapy (JOSPT)[DOI]
- A. Derasari, "McConnell Taping Shifts the Patella Inferiorly in Patients With Patellofemoral Pain: A Dynamic Magnetic Resonance Imaging Study", Physical Therapy, 90(3), pp.411~419 (2010), Oxford University Press (OUP)[DOI]
- T. Q. Lee, "Effects of simulated vastus medialis strength variation on patellofemoral joint biomechanics in human cadaver knees", Journal of rehabilitation research &development, 39(3), pp.429~ (2002)
- G. S. Kasman, "Introduction to Surface Electromyography" (1998), Aspen Publeshers
- Javid Mostamand, "The effect of patellar taping on joint reaction forces during squatting in subjects with Patellofemoral Pain Syndrome (PFPS)", Journal of Bodywork and Movement Therapies, 14(4), pp.375~381 (2010), Elsevier BV[DOI]
- A. E. Chapman, "Biomechanical Analysis of Fundamental Human Movements", pp.43~46 (2008), Human Kinetics
- 유기현, "3D CAD, 3D 프린터 활용과 광경화수지 주물 결함", 한국융합학회논문지, 8(3), pp.169~176 (2017), 한국융합학회[DOI]
- 신수정, "3D 프린팅을 사용해 제작한 새로운 손 보조기 적용 사례연구", 융합정보논문지, 7(2), pp.25~29 (2017), 중소기업융합학회[DOI]
- 조세홍, "3D 얼굴 성형 제작 시스템 구현", 디지털콘텐츠학회논문지, 9(1), pp.149~155 (2008), 한국디지털콘텐츠학회
- 정윤수, "기업 정보화 역기능에 따른 피해를 최소화하기 위한 기업 정보 처리 모델 설계", 융합정보논문지, 6(2), pp.11~17 (2016), 중소기업융합학회[DOI]
- 곽민서, "QLF-D를 활용한 국내 시판 불소 바니쉬의 재광화 효과에 대한 융합적 연구", 한국융합학회논문지, 8(1), pp.89~96 (2017), 한국융합학회[DOI]
- 황규석, "뇌전증 융합연구를 위한 MCS 녹아웃동물의 활용방안", 한국융합학회논문지, 7(2), pp.53~59 (2016), 한국융합학회[DOI]
