Restoration using dental CAD/CAM system in severe tooth wear patient: A case report
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In a situation where a vertical dimension has to be increased, the normal occlusion, function and aesthetics should be restored aftertaking into consideration the neuromuscular system and temporomandibular join. In order to do this, the provisional prosthesisshould be made according to the patient's information. Moreover, the period of adjustment should be made through the provisionalprosthesis modification, if necessary. The patient is then transferred to the final prosthesis to obtain results that are satisfactory. In themodern-day world, provisional prosthesis are replicated using three dimensional scanning and computer aided design/computer aidedmanufacturing (CAD/CAM) then made into final prosthesis. The adaptability of stomatognathic system can be judged by the PMMAprovisional restoration. Functional and aesthetical aspect can be obtained. The adjustment period can be shortened by an intraoralcorrection and proper wear between provisional restorations. By using the CAD/CAM technology that transfers the information rightinto the final prosthesis.
Abstract
In a situation where a vertical dimension has to be increased, the normal occlusion, function and aesthetics should be restored aftertaking into consideration the neuromuscular system and temporomandibular join. In order to do this, the provisional prosthesisshould be made according to the patient's information. Moreover, the period of adjustment should be made through the provisionalprosthesis modification, if necessary. The patient is then transferred to the final prosthesis to obtain results that are satisfactory. In themodern-day world, provisional prosthesis are replicated using three dimensional scanning and computer aided design/computer aidedmanufacturing (CAD/CAM) then made into final prosthesis. The adaptability of stomatognathic system can be judged by the PMMAprovisional restoration. Functional and aesthetical aspect can be obtained. The adjustment period can be shortened by an intraoralcorrection and proper wear between provisional restorations. By using the CAD/CAM technology that transfers the information rightinto the final prosthesis.
참고문헌 (10)
- Kenneth A. Turner, "Restoration of the extremely worn dentition", The Journal of Prosthetic Dentistry, 52(4), pp.467~474 (1984), Elsevier BV[DOI]
- Franco Mongini, "Condylar remodeling after occlusal therapy", The Journal of Prosthetic Dentistry, 43(5), pp.568~577 (1980), Elsevier BV[DOI]
- Matthias Karl, "Passivity of fit of CAD", CAM and copy-milled frameworks, veneered frameworks, and anatomically contoured, zirconia ceramic, implant-supported fixed prostheses, 2012, pp.107(4), 232~238[DOI]
- 양동헌, "임시치아 double scanning을 이용한 전악 임플란트 수복 증례", 대한치과보철학회지, 52(3), pp.252~257 (2014), 대한치과보철학회[DOI]
- M. HERRGUTH, "The aesthetics of all-ceramic veneered and monolithic CAD", CAM crowns, 2005, pp.32(10), 747~752[DOI]
- Dentists' Supply Co. of New York, "The Gysi face bow; a description of the instrument and accessories and directions for their use", ~ (1935)
- 서재민, "심하게 마모된 치열을 가진 환자의 완전구강회복", 구강회복응용과학지, 26(4), pp.463~476 (2010), 대한턱관절교합학회
- 김원태, "치과용 디지털 기자재로 제작된 교정 모형의 정확도 평가", 대한치과재료학회지, 44(3), pp.255~262 (2017), 대한치과재료학회[DOI]
- Mohammad M. Rayyan, "Comparison of interim restorations fabricated by CAD", CAM with those fabricated manually, 2015, pp.114(3), 414~419[DOI]
- Marwa Shembesh, "An In Vitro Comparison of the Marginal Adaptation Accuracy of CAD", CAM Restorations Using Different Impression Systems, 2017, pp.26(7), 581~586[DOI]