본문 바로가기
KERD
논문KCI 등재

Vertical ridge augmentation for implant placement using two types of titanium mesh on edentulous atrophic maxilla: clinical results of three patients

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류치의학

초록

This study aimed to compare the vertical and horizontal bone augmentation achieved when using different types of titanium mesh (Timesh) on edentulous atrophic maxilla. Surgical intervention was performed in the maxillary molar area of three patients. One patient received A type Ti-mesh (aTM; pore size: 0.9 mm, thickness: 0.1 mm), and placement of one implant was carried out after 6 months. The remaining two patients received B type Ti-mesh (bTM; pore size: 1.7 mm, 3.37 mm; thickness: 0.3 mm;), and 4 implants were placed after 6 months. The findings showed that both types of Ti-mesh were associated with good feasibility and predictability with regard to vertical and horizontal bone augmentation. Pore size did not affect the amount of bone regenerated for implant placement. However, bTM was associated with several advantages, including decreased operation time and increased convenience during guided bone regeneration surgery.

Abstract

This study aimed to compare the vertical and horizontal bone augmentation achieved when using different types of titanium mesh (Timesh) on edentulous atrophic maxilla. Surgical intervention was performed in the maxillary molar area of three patients. One patient received A type Ti-mesh (aTM; pore size: 0.9 mm, thickness: 0.1 mm), and placement of one implant was carried out after 6 months. The remaining two patients received B type Ti-mesh (bTM; pore size: 1.7 mm, 3.37 mm; thickness: 0.3 mm;), and 4 implants were placed after 6 months. The findings showed that both types of Ti-mesh were associated with good feasibility and predictability with regard to vertical and horizontal bone augmentation. Pore size did not affect the amount of bone regenerated for implant placement. However, bTM was associated with several advantages, including decreased operation time and increased convenience during guided bone regeneration surgery.

참고문헌 (27)

  1. Seyssens L, "A one-year prospective study on alveolar ridge preservation using collagen-enriched deproteinized bovine bone mineral and saddle connective tissue graft : a cone beam computed tomography analysis", Clin Implant Dent Relat Res, 21, pp.853~861 (2019)[DOI]
  2. Proussaefs P, "The use of titanium mesh in conjunction with autogenous bone graft and inorganic bovine bone mineral(biooss)for localized alveolar ridge augmentation : a human study", Int J Periodontics Restorative Dent, 23, pp.185~195 (2003)
  3. Zhang T, "The application of a newly designed L-shaped titanium mesh for GBR with simultaneous implant placement in the esthetic zone : a retrospective case series study", Clin Implant Dent Relat Res, 21, pp.862~872 (2019)[DOI]
  4. Weng D, "Contribution of the periosteum to bone formation in guided bone regeneration. A study in monkeys", Clin Oral Implants Res, 11, pp.546~554 (2000)[DOI]
  5. Borges CD, "Influence of collagen membrane on bone quality in titanium mesh reconstructions-Study in rats", J Periodontol, 91, pp.1673~1681 (2020)[DOI]
  6. Her S, "Titanium mesh as an alternative to a membrane for ridge augmentation", J Oral Maxillofac Surg, 70, pp.803~810 (2012)[DOI]
  7. Pichotano EC, "Evaluation of L-PRF combined with deproteinized bovine bone mineral for early implant placement after maxillary sinus augmentation : a randomized clinical trial", Clin Implant Dent Relat Res, 21, pp.253~262 (2019)
  8. Al-Ardah AJ, "Managing titanium mesh exposure with partial removal of the exposed site : a case series study", J Oral Implantol, 43, pp.482~490 (2017)[DOI]
  9. von Arx T, "Implant placement and simultaneous ridge augmentation using autogenous bone and a micro titanium mesh : a prospective clinical study with 20 implants", Clin Oral Implants Res, 10, pp.24~33 (1999)[DOI]
  10. von Arx T, "The TIME technique : a new method for localized alveolar ridge augmentation prior to placement of dental implants", Int J Oral Maxillofac Implants, 11, pp.387~394 (1996)
  11. Rakhmatia YD, "Current barrier membranes : titanium mesh and other membranes for guided bone regeneration in dental applications", J Prosthodont Res, 57, pp.3~14 (2013)[DOI]
  12. Elgali I, "Guided bone regeneration : materials and biological mechanisms revisited", Eur J Oral Sci, 125, pp.315~337 (2017)[DOI]
  13. Zellin G, "Healing of mandibular defects with different biodegradable and non-biodegradable membranes : an experimental study in rats", Biomaterials, 16, pp.601~609 (1995)[DOI]
  14. Assenza B, "Localized ridge augmentation using titanium micromesh", J Oral Implantol, 27, pp.287~292 (2001)[DOI]
  15. Degidi M, "Regeneration of the alveolar crest using titanium micromesh with autologous bone and a resorbable membrane", J Oral Implantol, 29, pp.86~90 (2003)[DOI]
  16. Ishikawa T, "Three-dimensional bone and soft tissue requirements for optimizing esthetic results in compromised cases with multiple implants", Int J Periodontics Restorative Dent, 30, pp.503~511 (2010)
  17. 임현창, "The effect of overlaying titanium mesh with collagen membrane for ridge preservation", Journal of Periodontal & Implant Science, 45(4), pp.128~135 (2015), 대한치주과학회
  18. Zeng N, "Evaluation of novel resorbable membranes for bone augmentation in a rat model", Clin Oral Implants Res, 27, pp.e8~e14 (2016)[DOI]
  19. Janner SFM, "The influence of collagen membrane and autogenous bone chips on bone augmentation in the anterior maxilla : a preclinical study", Clin Oral Implants Res, 28, pp.1368~1380 (2017)[DOI]
  20. Strietzel FP, "Healing pattern of bone defects covered by different membrane types--a histologic study in the porcine mandible", J Biomed Mater Res B Appl Biomater, 78, pp.35~46 (2006)[DOI]
  21. Rakhmatia YD, "Microcomputed tomographic and histomorphometric analyses of novel titanium mesh membranes for guided bone regeneration : a study in rat calvarial defects", Int J Oral Maxillofac Implants, 29, pp.826~835 (2014)[DOI]
  22. Gutta R, "Barrier membranes used for ridge augmentation : is there an optimal pore size?", J Oral Maxillofac Surg, 67, pp.1218~1225 (2009)[DOI]
  23. Zitzmann NU, "Resorbable versus nonresorbable membranes in combination with Bio-Oss for guided bone regeneration", Int J Oral Maxillofac Implants, 12, pp.844~852 (1997)
  24. Dahlin C, "Histological morphology of the e-PTFE", tissue interface in humans subjected to guided bone regeneration in conjunction with oral implant treatment, 1998, pp.9, 100~106
  25. 2.0.CO;2,
  26. Pieri F, "Alveolar ridge augmentation with titanium mesh and a combination of autogenous bone and anorganic bovine bone : a 2-year prospective study", J Periodontol, 79, pp.2093~2103 (2008)[DOI]
  27. Simion M, "Vertical ridge augmentation around dental implants using a membrane technique and autogenous bone or allografts in humans", Int J Periodontics Restorative Dent, 18, pp.8~23 (1998)

관련 논문AI추천

이 간행물의 다른 논문 (5건)