FlexRay 네트워크 시스템을 위한 FIBEX 자동 생성 알고리즘에 관한 연구
A Study on FIBEX Automatic Generation Algorithm for FlexRay Network System
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.
Abstract
As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.
참고문헌 (16)
- N. Navet, "Trends in Automotive Communication Systems", Proceeding of the IEEE, 93(6), pp.1204~1224 (2005)
- 김현구, "적응형 헤드 램프 컨트롤을 위한 야간 차량 인식", 대한임베디드공학회논문지, 6(1), pp.8~15 (2011), 대한임베디드공학회
- 정슬, "Intelligent Technique Application for Autonomous Lateral Position Control of an Unmanned 4 Wheel Steered Snowplow Robotic Vehicle", 대한임베디드공학회논문지, 6(3), pp.132~138 (2011), 대한임베디드공학회
- K.H. Park, "Global Chassis Control Technologies for Intelligent Vehicles", Journal of KSPE, 23(9), pp.15~22 (2006)
- K. JANG, "DESIGN FRAMEWORK FOR FLEXRAY NETWORK PARAMETER OPTIMIZATION", International Journal of Automotive Technology, 12(4), pp.589~597 (2011), 한국자동차공학회
- I. Park, "FlexRay network parameter optimization method for automotive applications", IEEE Transactions on Industrial Electronics, 58(4), pp.1449~1459 (2011)
- H. Zeng, "Schedule optimizationof time-triggered systems communication over the FlexRay static segment", IEEE Transactions on Industrial Informatics, 7(1), pp.1~17 (2011)
- E.G. Schmidt, "Message scheduling for the FlexRay protocol: the dynamic segment", IEEE Transactions on Vehicular Technology, 58(5), pp.2160~2169 (2009)
- E. Armengaud, "Towards a systematic test for embedded automotive communication systems", IEEE Transactions on Industrial Infomatics, 4(3), pp.146~155 (2008)
- F. Sethna, "What lessons can controller area networks learn from FlexRay", Proceedings on IEEE Conference of Vehicle Power and Propulsion, pp.1~4 (2006)
- G. Leen, "Digital networks in the automotive vehicle", Computer & Control Engineering Journal, 10(6), pp.257~266 (1999)
- Easing the transition of system designs from CAN to FlexRay, "R. Cummings", SAE, ~, pp.SAE Technical Paper 2008-01-0804 (2008)
- 양재성, "FlexRay 프로토콜에서 플랫폼 구성 변수의 자동 생성에 관한 연구", 대한임베디드공학회논문지, 7(1), pp.41~52 (2012), 대한임베디드공학회
- P. Mishra, "Distributed control system development for FlexRay-based systems", Proceedings on SAE World Congress & Exhibition, 114(2005-01-1279), pp.240~250 (2005)
- Vector, "DBC File Format Documentation", ~ (2007)