정밀구동메커니즘 적용 모션제어시스템 설계 및 구현
Design and Implementation for Motion Control System with Precise Driving Mechanism
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, a motion control system based on 2-axis gimbal system is designed and implemented to drive a high speed and precision. The proposed system consists of the RS-422 interface, 2-axis gimbal platform, servo control unit integrated with a high speed DSP chip-set, servo amplifier unit, potentiometer sensor unit, and resolver sensor unit. The servo control unit using the high speed DSP firmware is designed to get a fast response without an overshoot with step input and a RMS error of low probability with ramp input. The servo amplifier unit using a voltage control is designed to resolve the zero-crossing distortion for precise motion. To verify the performance and stability of the implemented system, experiments are performed through a measurement of the time and frequency domain response in a laboratory environment by using a PXI(PCI eXtentions for Instrumentation).
Abstract
In this paper, a motion control system based on 2-axis gimbal system is designed and implemented to drive a high speed and precision. The proposed system consists of the RS-422 interface, 2-axis gimbal platform, servo control unit integrated with a high speed DSP chip-set, servo amplifier unit, potentiometer sensor unit, and resolver sensor unit. The servo control unit using the high speed DSP firmware is designed to get a fast response without an overshoot with step input and a RMS error of low probability with ramp input. The servo amplifier unit using a voltage control is designed to resolve the zero-crossing distortion for precise motion. To verify the performance and stability of the implemented system, experiments are performed through a measurement of the time and frequency domain response in a laboratory environment by using a PXI(PCI eXtentions for Instrumentation).
참고문헌 (11)
- P. Pillay, "Application Characteristics of Permanent Magnet Synchronous and Brushless DC Motors for Servo Drives", IEEE Trans. Ind. Appl., 27(5), pp.986~996 (1991)
- D.J. Seok, "The Study on the Motion Control Platform using Real-time Software based Feed-forward PID Controller and Industrial Network Protocols", Proceedings on Fall Conference of Korea Society of Mechanical Engineers, pp.1051~1056 (2011)
- 김병섭, "공작기계의 서보제어와 입력성형기법", 한국정밀공학회지, 28(9), pp.1011~1017 (2011), 한국정밀공학회
- P.J. Kennedy, "Adaptive Compensation for Pointing and Tracking Systems Application", Proceedings on the 1999 IEEE International Conference of Control Application, 1, pp.279~282 (1999)
- B. Li, "Nonlinear Induced Disturbance Rejection in Inertial Stabilization Systems", IEEE Trans. on Contr. Systems Technology, 6(3), pp.421~427 (1998)
- H.B. Moon, "Leader-Follower Robot Trailing Control Using Ultrasonic Gimbaled Seeker", Proceedings on Conference of Korean Institute of Electrical Engineers, pp.83~85 (2012)
- D.H. Lee, "Gimbal angle command generation for a Antenna system", Proceedings on Fall Conference of Korean Society for Aeronautical & Space Sciences, pp.2231~2233 (2012)
- B.C. Seon, "TVC Disturbance Torque Budget of Launch Vehicle Gimbal Engines", Proceedings on Spring Conference of Korean Society for Aeronautical & Space Sciences, pp.429~434 (2012)
- C.Y. Ann, "The Adoption of the Fuzzy Logic Control for Solving the Overshoot in intelligent Robot Control", Journal of Korean Institute of Information Scientists and Engineers, 18(1), pp.65~68 (1991)
- W. Zhonghua, "Robust Adaptive Deadzone Compensation of DC Servo System", IEE Proc. Contr. Theory & Appl., 153(6), pp.709~713 (2006)
- D.J. Lee, "2D-Ultrasonic linear motor system control using Dead-zone compensation", Proceedings on Fall Conf. on Korean Society for Precision Eng, pp.53~54 (2012)