고해상도 카메라 기반 파장 빔 결합 시스템의 다중 광원의 모니터링과 파장 제어 기법 연구
Control and Monitoring of Wavelengths in Spectral Beam Combining System Based on High Resolution Camera
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Spectral Beam Combining (SBC) is used for a high-power fiber laser in order to overcome the power limitation of single fiber laser. In SBC, several laser bwams with different wavelengths are combined to obtain a single-aperture beam by diffraction grating. The combining efficiency is dependent on a linewidth, beam quality and specific wavelength of each beam among others. In this paper, we consider the method of a wavelength monitoring and a feedback control of laser diodes used as seeds of laser beams to obtain optimum combining conditions. In order to measure the wavelengths of multi-beam, we use the high resolution camera and diffraction grating with . The experiment results show the possibility of feedback control of a current and temperature of multi-seed laser diodes to obtain optimum wavelengths for SBC.
Abstract
Spectral Beam Combining (SBC) is used for a high-power fiber laser in order to overcome the power limitation of single fiber laser. In SBC, several laser bwams with different wavelengths are combined to obtain a single-aperture beam by diffraction grating. The combining efficiency is dependent on a linewidth, beam quality and specific wavelength of each beam among others. In this paper, we consider the method of a wavelength monitoring and a feedback control of laser diodes used as seeds of laser beams to obtain optimum combining conditions. In order to measure the wavelengths of multi-beam, we use the high resolution camera and diffraction grating with . The experiment results show the possibility of feedback control of a current and temperature of multi-seed laser diodes to obtain optimum wavelengths for SBC.
참고문헌 (12)
- C. Jauregui, "High-power Fibre Lasers", Journal of Nature Photonics, 7(11), pp.861~867 (2013)
- 이상문, "ARM 및 FPGA를 이용한 고속 레이저 삼각측량 시스템", 대한임베디드공학회논문지, 8(1), pp.25~29 (2013), 대한임베디드공학회
- 김건정, "Mutual Interference on Mobile Pulsed Scanning LIDAR", 대한임베디드공학회논문지, 12(1), pp.43~62 (2017), 대한임베디드공학회[DOI]
- 한상훈, "영상 및 레이저 계측기를 통한 경사면 상황인식 시스템", 대한임베디드공학회논문지, 9(4), pp.219~227 (2014), 대한임베디드공학회[DOI]
- J.W. Dawson, "Analysis of the Scalability of Diffraction Limited Fiber Lasers and Amplifiers to High Average Power", Journal of Optics Express, 16(17), pp.13240~13266 (2008)
- T. Y. Fan, "Laser Beam Combining for High-power, High-radiance Sources", IEEE Journal of Selected Topics in Quantum Electron, 11(3), pp.567~577 (2005)
- I. Dajani, "Multi-kilowatt Power Scaling and Coherent Beam Combination of Narrow-linewidth Fiber Lasers", Proceedings of International Society for Optics and Photonics, pp.9728~ (2016)
- T.H. Loftus, "Spectrally Beam-combined Fiber Lasers for High-average-power Applications", IEEE Journal of Selected Topics in Quantum Electronics, 13(3), pp.487~497 (2007)
- A. Flores, "Pseudo-random Binary Sequence Phase Modulation for Narrow Linewidth, Kilowatt, Monolithic Fiber Amplifiers", Journal of Optics Express, 22(15), pp.17735~17744 (2014)
- R. Tao, "Suppressing Mode Instabilities by Optimizing the Fiber Coiling Methods", Journal of Laser Phys. Lett, 14(2), pp.1~7 (2017)
- A. V. Harish, "Optimization of Phase Modulation Formats for Suppression of stimulated Brillouin Scattering in Optical Fibers", IEEE Journal of Selected Topics in Quantum Electronics, 24(3), pp.1~10 (2018)
- J. Lee, "2.05 kW All-fiber High-beam-quality Fiber Amplifier with Stimulated Brillouin Scattering Suppression Incorporating a Narrow-linewidth Fiber-bragg -grating-stabilized Laser Diode Seed Source", Applied Optics, 58(23), pp.6251~6256 (2019)
