식품 및 축산물 금속검출기를 위한 네트워크 기반 자동화 시스템 설계
Design of Network-based Automation System for Detecting Metallic Objects in Food and Livestock
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper presents a network-based automation system for the detection of metallic objects in food and livestock. A metal detector is a core equipment used for the inspection required by HACCP. Since the existing metal detectors are manufactured as a single-body equipment, it is difficult to take into account various user requirements for the system. In order to overcome the drawback, this study presents a network-based automation system for metal detector utilizing an industrial fieldbus and modular components. The proposed system can effectively consider the various customer requirements and control schemes. The proposed system can also achieve the improvement in speed and success rate of detecting metallic objects. The effectiveness of the proposed system is demonstrated through a various experiments.
Abstract
This paper presents a network-based automation system for the detection of metallic objects in food and livestock. A metal detector is a core equipment used for the inspection required by HACCP. Since the existing metal detectors are manufactured as a single-body equipment, it is difficult to take into account various user requirements for the system. In order to overcome the drawback, this study presents a network-based automation system for metal detector utilizing an industrial fieldbus and modular components. The proposed system can effectively consider the various customer requirements and control schemes. The proposed system can also achieve the improvement in speed and success rate of detecting metallic objects. The effectiveness of the proposed system is demonstrated through a various experiments.
참고문헌 (21)
- , Law No. 18363, , 2021
- G. H. Jung, "Ways to Improve Food Safety Certification System", Health and Welfare Forum, 113, pp.68~77 (2006)
- G. S. Sin, "The Concept and Necessity of HACCP", Journal of the Korean Veterinary Medical Association, 42(6), pp.534~544 (2006)
- "Food Safety Management Guidelines, Ministry of Food and Drug Safety, Administrative Publication Registration Number 11-1471000-000040-10", ~ (2022)
- S. I. Cho, "Preliminary Study for Developing Metal Detector in Food", Journal of the Korean Society of Agricultural Machinery, pp.157~163 (1997)
- S. Y. Lee, "A Study on the Enhancement of Reliability for PLC Control System", Proceedings of KIIEE Annual Conference, pp.267~272 (1999)
- 박건수, "IoT 디바이스를 이용한 클라우드 플랫폼 기반의 실시간 공장 모니터링 시스템 개발", 대한임베디드공학회논문지, 13(1), pp.25~32 (2018), 대한임베디드공학회[DOI]
- 김영웅, "무선센서 네트워크를 이용한 가축생육환경정보 실시간 모니터링 시스템 구현", 대한임베디드공학회논문지, 7(6), pp.301~309 (2012), 대한임베디드공학회
- 박용주, "생체 환경 정보 센싱 모듈 및 농장 제어 게이트웨이를 이용한 스마트 낙농 관리 시스템 개발", 대한임베디드공학회논문지, 11(1), pp.15~20 (2016), 대한임베디드공학회[DOI]
- M. F. R. Al-Okby, "Mobile Detection and Alarming Systems for Hazardous Gases and Volatile Chemicals in Laboratories and Industrial Locations", Sensors, 21(23), pp.8128~ (2021)
- P. Kopacek, "End of Life Management of Automation Devices", IFAC Proceedings, 45(6), pp.534~539 (2012)
- "I. E. C. 61131-3: Programmable Controllers–part 3:Programming Languages, International Standard", International Electrotechnical Commission, ~ (2003)
- H. J. Kim, "Intelligent Sensor Technology Trend for Smart IT Convergence Platform", Electronics and Telecommunications Trends, 34(5), pp.14~25 (2019)
- B. Hannaford, "Actuator Properties and Movement Control: Biological and Technological Models", Multiple Muscle Systems: Biomechanics and Movement Organization, 101~120 (1990)
- M. A. IEEE Standards Coordinating Committee, "IEEE Standard Glossary of Software Engineering Terminology(IEEE std 610.12-1990)", IEEE Computer Society, 1~84 (1990)
- An Inside Look at Industrial Ethernet Communication Protocols, "Z. Lin", Texas Instruments, ~ (2013)
- A. Prikhodko, "Dynamic Analysis of Intermittent-motion Conveyor Actuator", Actuators, 10(8), pp.174~ (2021)
- O. Motor, "Motor Sizing Calculations" (2013), Orientalmotor
- U. K. Gwon, "Trends and Prospects of PLC-related Technology", The Magazine of the IEIE, 23(12), pp.44~57 (1996)
- T. Reininger, "Sensors in Position Control Applications for Industrial Automation", Sensors and Actuators A: Physical, 129(1-2), pp.270~274 (2006)
- M. Gajjar, "Mobile Sensors and Context-Aware Computing" (2017), Morgan Kaufmann Publishers