본문 바로가기
KERD
논문KCI 등재

동적·정적 자료 기반 도로위험도 산정 알고리즘 개발

Developing Road Hazard Estimation Algorithms Based on Dynamic and Static Data

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

초록

본 연구에서는 사업용 차량 수집정보를 통해 도로위험을 계량화하고 검증할 수 있는 네 가지 알고리즘과 관련 지수를 개발하였다. 도로위험도 산정을 위해서 사업용 차량의 블랙박스와디지털 운행 기록계로 부터 원시 데이터를 수집하였다. 포트홀, 도로 결빙, 안개 등 가공 처리된 데이터는 사업용 차량 수집정보 공유시스템에서 생성이 가능하다. 도로 위험도 산정 알고리즘은 기본적으로 이러한 수집정보와 도로 기하구조 자료를 활용하였다. 가공 처리된 데이터에 따라 총 4개의 서로 다른 도로 위험 알고리즘과 관련 지표를 개발하였다. 과거 이력자료를근거로 상습결빙구간 및 안개다발구간인 국도 19호선(강원도)과 국도 1호선(세종시 인근)을 대상으로 수동형 운행기록계를 이용하여 알고리즘 검증을 수행하였다. 단기적으로 실제 도로위험정보 취득에 어려움이 있어 가상으로 위험정보를 수집하여 알고리즘을 검증한 결과 특징적인 알고리즘 오류는 발생하지 않았다. 본 연구는 지점이 아닌 구간을 기반으로 도로 위험정보를 제공하기 때문에 도로 이용자는 물론 도로 유지관리기관에도 실질적인 도움을 줄 수 있을것으로 판단된다.

Abstract

This study developed four algorithms and their associated indices that can quantify and qualify road hazards along roadways. Initially, relevant raw data can be collected from commercial vehicles by camera and DTG. Well-processed data, such as potholes, road freezing, and fog, can be generated from the Integrated management system. Road hazard algorithms combine these data with road inventory data in the Data Sharing Platform. Depending on well-processed data, four different road hazard algorithms and their associated indices were developed. To test the algorithms, an experimental plan based on passive DTG attached in probe vehicles was performed at two different test locations. Selection of the test routes was based on historical data. Although there were limitations using random data for commercial vehicles, hazardous roadways sections, such as fog, road freezing, and potholes, were generated based on actual historical data. As a result, no algorithm error was found in the entire test. Because this study provides road hazard information according to a section, not a point, it can be practically helpful to road users as well as road agencies.

참고문헌 (12)

  1. 조종석, "화물차 DTG 데이터를 활용한 고속도로 졸음운전 위험구간 분석", 대한교통학회지, 35(2), pp.160~168 (2017), 대한교통학회[DOI]
  2. 한여희, "DTG 빅데이터 기반의 링크 평균통행시간을 이용한 도심네트워크 혼잡분석 방안 연구", 한국ITS학회 논문지, 16(5), pp.72~84 (2017), 한국ITS학회[DOI]
  3. 김수재, "고속버스 DTG 자료를 활용한 버스 위험운전 행태 분석", 한국ITS학회 논문지, 17(2), pp.87~97 (2018), 한국ITS학회[DOI]
  4. Information System Introduction and Operation Effect Analysis in the Government, "Korean Association for Organizational Studies", ~ (2010)
  5. Commercial Vehicle-Based Road and Traffic Information System, "Korean Institute of Civil Engineering and Building Technology", ~, pp.Preliminary Report (R&D-15RDPP-C103331-01) (2017)
  6. Commercial Vehicle-Based Road and Traffic Information System, "Korean Institute of Civil Engineering and Building Technology", ~, pp.2nd Annual Report (No.19TLRP-B148886-02) (2019)
  7. 권영민, "노선버스 운송업종별 운전자의 근로여건 및 사고 분석 : DTG 데이터를 활용하여", 한국ITS학회 논문지, 18(2), pp.1~11 (2019), 한국ITS학회[DOI]
  8. 이향숙, "Identifying Key Factors to Affect Taxi Travel Considering Spatial Dependence: A Case Study for Seoul", 한국ITS학회 논문지, 18(5), pp.64~78 (2019), 한국ITS학회[DOI]
  9. "MDM homepage"[URL]
  10. "TM 2.0 homepage"[URL]
  11. "Waze homepage"[URL]
  12. Yang C., "A Multi-Criteria Decision Support Methodology for Implementing Truck Operation Strategies", Transportation, 40(3), pp.713~728 (2013)

관련 논문AI추천

이 간행물의 다른 논문 (8건)