UWB 차량통신 채널에서 IEEE 802.15.4a 시스템의 성능 분석
Performance Analysis of IEEE 802.15.4a System in UWB Intra Vehicle Communications Channel
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
최근 차량내 무선통신이 자동차 산업에서 큰 관심을 받고 있으며 UWB 기술이 차량내 통신 시스템에 유력한 기술로 고려되고 있다. 차량내 통신 채널의 측정과 모델링에 대한 많은 연구가 이루어져 왔으나, 차량내 통신환경에서 다양한 PHY Layer 기술에 대한 성능 분석은 여전히 많은 관심의 대상이 되고 있다. 본 논문의 목적은 차량내 채널환경에서 IEEE 802.15.4a PHY 시스템의 성능을 분석함에 있다. 새시와 엔진 부분의 채널 모델을 설정하고, 동기식 및 비동기식 수신기의 성능을 시뮬레이션을 통하여 분석하였다.
Abstract
Recently wireless intra-vehicle communication has received a great interest from the automotive industry and ultra wideband (UWB) technology is considered as one of the potential candidate for this system. Many research works have been done on the measurement and modeling of intra-vehicle communication channel. However, very little work has been reported for the performance analysis of various PHY layer methods under the intra-vehicle communication environment. This paper is to study IEEE 802.15.4a standard in intra-vehicle channel and to evaluate its performance. Channel model in chassis and engine compartment is considered for evaluation. Through simulation BER performance of system with different receiver structures is analyzed.
참고문헌 (19)
- T. Nolte, "Automative Communications-Past, Current andFuture", Proc. Emerging Technologies and FactoryAutomation conf, pp.958~992 (2005)
- J. Li, "Channel characterization for Ultra Wideband Intra Vehicle sensor networks", Proc.Military Commun.Conf. (MILCOM), pp.1~5 (2006)
- L. Liu, "UWB channel measurement and modeling for the intra vehicle environments", Proc. IEEE Int. Conf. Commun.Tech. (ICCT), pp.381~384 (2010)
- P. C.Richardson, "Modeling of Ultra Wideband Channels withinVehicles", IEE Journal on Selected areas inComm, 21(4), pp.906~912 (2006)
- R. Kaneko, "Coverage area prediction method of extremelyreliable in-car MB-OFDM communication", Proc.IEEE Vehicular Technology Conf.(VTC), pp.1~5 (2010)
- W. Aldeeb, "A Study on the Channel and BER-SNR Performance of Ultra Wide Band Systems Applied in Commercial Vehicles", Proc. IEEE Sarnoff Symposium, pp.1~5 (2007)
- "IEEE 802.15 working group for WPANs, “Part15.4: Wireless Medium Access Control (MAC)and Physical Layer (PHY) Specifications forLow-Rate Wireless Personal Area Networks(WPANs); Amendment 1: Add Alternated PHYs”", ~ (2007)
- D3.1-UWB Channel Model Report, "D.Cassioli", ~, pp.Tech.Rep.ISS-2001-35189-ULTRAWAVES (2003)
- W. Niu, "Ultra-Wideband Channel Modelling for Intra vehicle Environment", Eurasip Journal on Wireless Communications and Networking, 2009 (2009)
- A. F. Molisch, "Comprehensive Standardized Model for UWBpropagation channels", IEEE Transactions onAntennas and Propagation, 54(11), pp.3151~3166 (2006)
- Z. Irahhauten, "A link budget model for UWB-WPAN Applications", Proc. European Conf. on Wireless Technology, pp.95~98 (2006)
- J. Zhang, "UWB Systems for Wireless Sensor Networks", Proc. of IEEE, 2, pp.313~331 (2009)
- Z. Ahmadian, "Performance Analysis of the IEEE 802.15.4a UWB System", IEEE Transactions on Communications, 57(5), pp.1474~1485 (2009)
- P.Median, "Impact of Delay Spread on IEEE802.15.4a Networks with Energy DetectionReceivers", Journal of Apllied Science andTechnology, 8(3), pp.352~364 (2010)
- V. Lottici, "Channel Estimation for Ultra-WidebandCommunications", IEEE Journal on Selected Areansin Communications, 20(9), pp.1638~1645 (2002)
- F. Wang, "Weighted Energy Detection for Noncoherent Ultra-Wideband Receiver Design", IEEE Transactions on Wireless Communications, 10(2) (2011)
- M. D. Benedetto, "Understanding ultra-wide band radio fundamentals", New Jersey, Prentice Hall Professional Technical Reference (2003)
- J. D. Choi, "Performance of UWB with suboptimal receivers in multipath channels", IEEE Journals on Selected Areas in Communications, 20(9), pp.1754~1766 (2002)
- E. Reyna, "UWB Energy Detection Receivers with PartialChannel Knowledge", Proc. on IEEE Int. Conf.ICC'2006 on Communications, pp.4688~4693 (2006)