본문 바로가기
KERD
논문KCI 등재

전력기기용 고안정성 광섬유 CT 센서의 광 신호처리기 설계 및 구현

Design and Implementation of Optical Signal Processor in Fiber-Optic Current Transducer for Electric Equipments

0

조회

0

다운로드

0

인용

0

참고문헌

초록

본 논문에서는 PFOCS 형태의 전력기기용 고안정성 광섬유 CT 센서에 활용할 수 있는 광 신호처리기를 설계/구현하고 그 특성에 대하여 논의하였다. 본 논문에서 제작한 광 신호처리기는 PFOCS를 구성하는 광 부품에서 발생되는 광 손실이나 편광 변화로 인한 출력 광의 강도 변화로 발생하는 측정 전류 오차를 줄이기 위해 사용된다. 또한, 광 신호처리기는 광전 변환부, 아날로그 신호처리부, 레벨 시프트 및 마이크로프로세서로 구성된 실시간 계측제어부를 일원화하여 소형/경량으로 제작되었다. 제작된 광 신호처리기의 특성 실험은, 전광섬유 소자로 구성된 PFOCS를 이용하여, 파장의 광원과 권선수가 약 1500인 솔레노이드에 전류를 인가해 ~의 범위에 대하여 수행하였다. 그 결과, 측정 전류의 선형성 오차는 에서 범위에서 최대 미만, 평균 오차는 약 미만으로 양호한 선형성을 보였다.

Abstract

In this paper, we have designed and implemented an optical signal processor in order to use in a fiber-optic current CT for electric equipments where its properties were discussed. The fabricated optical signal processor is used to reduce a measurement current error that induced by the effects of intensity variation in the optical output signal due to losses coming from optical components or polarization variation in a PFOCS. Also, the optical signal processor was fabricated in compact/lightweight with unification of opto-electronic transducer part, analog signal process part, and real-time measurement part consisted of a level shift and -processor. The experiment of optical signal processor has been performed in the range of , using the PFOCS made all fiber-optic components. As a result of experiment, the linearity error of measurement current is less than 1.7% and its average error is less than 0.3% in the range of .

참고문헌 (11)

  1. "Polarimetric Current Sensor Using an In-Line Faraday Rotator", E83-C(3), pp.331~335
  2. "Faraday current sensor that uses a triangular-shaped bulk-optic sensing element", 17, pp.1167~1169
  3. "Manufacturing challenges of optical current and voltage sensors for utility applications", 3201(3201), pp.2~19 (1997)
  4. "Review of optical current sensor using bulk-glass sensing elements", 39, pp.219~224 (1993)
  5. "Elimination of Birefringence Induced Scale Factor Errors in the In-Line Sagnac Interferometer Current Sensor", 16(10), pp.1844~1850 (1998)
  6. "Optimal sensing of current based on an extrinsic Sagnac interferometer configuration", 30, pp.17~24 (1998)
  7. "Polarization and magnetooptic properties of single-mode optical fiber", 17, pp.52~56
  8. "편광측정법에 의한 광섬유 전류 센서 제작에 관한 연구", 14(6), pp.443~451 (2004)
  9. "Birefringence induced by bends and twists in single-mode optical fiber", 19, pp.2606~2611 (1980)
  10. "Polarization optics of twisted single-mode fibers", 18, pp.2241~2251 (1979)
  11. "Electromagnetic Propagation through Materials Possessing Both Faraday Rotation and Birefringence Experiments with Ytterbium Orthoferrite Journal of Applied Physics", 40, pp.2760~2765

이 간행물의 다른 논문 (13건)