활성금속 브레이징을 사용한 세라믹과 금속의 접합
Joining of Ceramic and Metal using Active Metal Brazing
1
조회
0
다운로드
7
인용
0
참고문헌
초록
Active brazing of ceramic to metal is reviewed in this paper. As one of the key aspect in joint techniques,active brazing has been developed to simplify the manufacturing procedure of brazed joints between ceramic and metal. The active filler metal includes Ag-Cu-Ti series, Cu-Ti series, Co-Ti series and so on. The active filler metal which supplies the chemical bonds between ceramic and metal, enhances the wetting of filler metal on ceramic surface and eliminates the need for metallization treatments. The residual stress caused by difference of coefficient of thermal expansion between ceramic and metal, holds a direct influence on the bonding strength and even results in a fracture. Good joints of ceramic to metal promote the miniaturization and simplicity of electronic components with multifunction.
Abstract
Active brazing of ceramic to metal is reviewed in this paper. As one of the key aspect in joint techniques,active brazing has been developed to simplify the manufacturing procedure of brazed joints between ceramic and metal. The active filler metal includes Ag-Cu-Ti series, Cu-Ti series, Co-Ti series and so on. The active filler metal which supplies the chemical bonds between ceramic and metal, enhances the wetting of filler metal on ceramic surface and eliminates the need for metallization treatments. The residual stress caused by difference of coefficient of thermal expansion between ceramic and metal, holds a direct influence on the bonding strength and even results in a fracture. Good joints of ceramic to metal promote the miniaturization and simplicity of electronic components with multifunction.
참고문헌 (33)
- "Hermetic encapsulation"[URL]
- C. H. Jun, "Effects of Surface Modification with IBAD in Brazing Joining of Al2O3-SUS304", 10, pp.41~ (2005)
- M. Samandi, "Nuclear Instruments and Methods in Physics Research B", (127, pp.128) (1997), 669~
- K. Suganuma, "Joining of Ceramics and Metals", Ann. Rev. Mat. Sci, (18), pp.47~ (1988)
- M. G. Nicholas, "Ceramic", Metal Joining for Structureal Application, 1986, pp.통권 : 2, 657~
- J. Godziemba-Maliszewski, "Metal-Silicon Carbide Bonds for Elevated Temperature Application", ceramic Mat. and Comp. For Engines, (433) (1986)
- R. F. Pabst, "Adherence Properties of Metal to Ceramic Joints", J. Mat. Sci, (15), pp.188~ (1980)
- Ch. Nissel, "HIP Diffusion Bonding", Powder Matall, Int, (16), pp.114~ (1984)
- Qian Wang, "Au-Sn 공정 접합을 이용한 RF MEMS 소자의 Hermetic 웨이퍼 레벨 패키징", 마이크로전자 및 패키징학회지, 12(3), pp.197~206 (2005), 한국마이크로전자및패키징학회
- 장은정, "Cu-Cu 열압착 웨이퍼 접합부의 계면접합강도에 미치는 N2+H2 분위기 열처리의 영향", 마이크로전자 및 패키징학회지, 16(3), pp.31~37 (2009), 한국마이크로전자및패키징학회
- T. Yamada, "Joining of Ceramic to Metals with Active Filler Metal", J. Mat. Sci, (15), pp.401~ (1980)
- T. Kada, "Diffusion Reaction-Bonding of Si3N4 Ceramics under High Pressure", J. Am. Ceram. Soc, (64), pp.135~6 (1983)
- M. M. Schwartz, "Ceramic Joining" (1990), ASM
- W. D. MacDonald, , Ann. Rev. Mat. Sci, (22), pp.23~ (1992)
- D. S. Duvall, , Weld. J, (53), pp.203~ (1974)
- Y. Lino, , Sci. Lett, (10), pp.104~ (1990)
- R. E. Loehman, "Joining of Ceramics", Am. Ceram. Soc. Bull, (67), pp.375~ (1989)
- A. J. Moorhead, "Direct Brazing of Ceramics for Advanced Heavy-Duty Diesels", Welding J, (65), pp.17~ (1986)
- A. J. Moorhead, "Direct Brazing of Alumina Ceramics", Adv. Ceram. Mat, (2), pp.159~ (1987)
- K. Suganuma, , Ann. Rev. Mater. Sci, (18), pp.47~ (1988)
- R. E. Loehman, "Wetting and Joining of Mullite Ceramics by Active Metal Braze alloy", J. Am. Ceram. Soc, (77), pp.271~ (1994)
- K. Suganuma, "Ceramic and Glasses, In Engineered Handbook", Engineered Handbook, (4), pp.523~ (1990), ASM
- M. G. Nicholas, "Promiting the Wetting and Brazing of Ceramics", Structural caramics Joining II, (35), pp.115~ (1993), Caram. Trans.,
- H. Mizuhara, "Ceramic-to-Metal Joining with Active Brazing Metal", Welding J, 65(10), pp.17~31 (1986)
- 장희석, "활성금속 브레이징법에 의한 Si3N4", Stainless steel 316 접합체 제조에 관한 연구(in Korean), 한양대, 2003
- T. Suga, "MRS Int'l Mtg", on Adv. Mats, (8), pp.99~ (1987)
- B. J. Dalgleigh, , Acta Metall, 6(8), pp.29~ (1988)
- B. H. Marshall, , J. Am. Ceram. Soc, 61(1-2), pp.21~ (1978)
- M. Yang, "Brazing of Al2O3 to Ti-6Al-4V alloy with in situ synthesized TiB-whisker-reinforced active brazing alloy", Ceram. Int (2011)
- Z. Chen, "Interfacial microstructure and strength of partial transient liquid-phase bonding of silicon nitride with Ti", Ni multi-interlayer, 2004, pp.(380), 394~401
- J. C. Feng, "Effects of processing parameters on microstructure and mechanical behavior of SiO2", Ti-6Al-4V joint brazed with AgCu, Mater. Sci. Eng. A, pp.2010, (527)[DOI]
- O. Smorygo, "Evolution of the interlayer microstructure and the fracture modes of the zirconia", Cu-Ag-Ti filler, Mater. Lett, pp.2007, (61)[DOI]
- A. Guedes, , Mater. Sci. Eng., A, (301), pp.118~ (2001)