변형 폴리욜법에 의한 Bi 나노입자의 제조
Synthesis of Bi Nanoparticles Using a Modified Polyol Method
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Bismuth(III) carbonate basic을 전구체로 사용하여 상온 습식 환원법인 변형 폴리욜법으로 순수 비스무트 나노입자를 합성하면서 캡핑제 또는 표면 안정제의 교체 및 용매의 종류에 따른 비스무트 입자의 제조 특성을 각각 관찰하였다. Polyvinylpyrroldone(PVP) 캡핑제 첨가 조건에서 합성 직후 기준으로 diethylene glycol(DEG) 용매 사용 시 가장미세한 비스무트 나노입자가 형성되었으며, polyethylene glycol(PEG) 용매 사용 시 가장 조대한 비스무트 나노입자가 합성되었다. 합성 직후에 관찰된 나노입자의 크기와 건조 후 합체 및 엉겨붙음 거동으로 성장한 입자의 크기는 잘 비례하였는데, DEG 용매 사용 시 최종 단계에서 수십 nm~약 300 nm 직경의 가장 미세한 비스무트 입자를 얻을 수 있었다. 또한 캡핑제 및 표면 안정제의 종류에 상관없이 PEG 용매를 사용하여 합성한 경우에서는 광범위한 합체 및 엉겨붙음 거동이 관찰되어 상대적으로 조대한 입자들이 뭉친 형태의 최종 시료가 얻어졌다.
Abstract
Bismuth(Bi) nanoparticles were synthesized at room temperature by a modified polyol process using bismuth(III) carbonate basic as precursor. In addition, some characteristics of the synthesis with respect to the exchange of a capping agent/surface stabilizer and solvent type were observed. When polyvinylpyrroldone was added, the finest Bi nanoparticles were synthesized in diethylene glycol(DEG), while the coarsest nanoparticles were formed in polyethylene glycol(PEG). The particle size immediately after synthesis was proportionate to final particle size which was determined by particle growth through coalescence and aggregation during drying. As a result, the finest Bi particles with the diameter range of several tens of nanometers - 300 nm were finally obtained in DEG. Regardless of the type of capping agent/surface stabilizer, extensive coalescence and aggregation behavior occurred in PEG, resulting in final products agglomerated with coarse particles.
참고문헌 (20)
- 김주형, "Bi-10Cu-20Sb-0.3Ni 고온용 무연 솔더와 Cu와의 계면 반응 특성", 마이크로전자 및 패키징학회지, 17(1), pp.1~7 (2010), 한국마이크로전자및패키징학회
- O. Rohr, "Bismuth–The New Ecologically Green Metal for Modern Lubricating Engineering", Industrial Lubrication & Tribology, 54, pp.153~ (2002)
- J. P. Heremans, "Thermoelectric Power of Bismuth Nanocomposites", Physical Review Letters, 88 (2002)
- P. Chiu, "A Study of the Size Effect on the Temperature- Dependent Resistivity of Bismuth Nanowires with Rectangular Cross-Sections", Nanotechnology, 15, pp.1489~ (2004)
- S. Park, "Synthesis and Characterization of Bi Nanorods and Superconducting NiBi Particles", Journal of Alloys and Compounds, 400, pp.88~ (2005)
- G. Bhimarasetti, "Synthesis of Sub-20- nm-Sized Bismuth 1-D Structures Using Gallium-Bismuth Systems", Journal of Physical Chemistry B, 109, pp.16219~ (2005)
- 최영남, "동시증착법으로 형성한 Bi-Te 박막의 열전특성", 마이크로전자 및 패키징학회지, 17(4), pp.89~94 (2010), 한국마이크로전자및패키징학회
- 노명래, "텅스텐 분말을 분산시킨 Bi_2(Te_(0.9)Se_(0.1))₃가압소결체의 열전특성", 마이크로전자 및 패키징학회지, 18(4), pp.55~61 (2011), 한국마이크로전자및패키징학회
- J. L. Costa-Krämer, "Conductance Quantization in Bismuth Nanowires at 4 K", Physical Review Letters, 78, pp.4990~ (1997)
- K. Liu, "Structural and Magneto-Transport Properties of Electrodeposited Bismuth Nanowires", Applied Physics Letters, 73, pp.1436~ (1998)
- J. Heremans, "Thermoelectric Power of Bismuth Nanowires", Physical Review B, 59 (1999)
- M. R. Black, "Infrared Absorption in Bismuth Nanowires Resulting from Quantum Confinement", Physical Review B, 65 (2002)
- M. R. Black, "Optical Absorption from an Indirect Transition in Bismuth Nanowires", Physical Review B, 68 (2003)
- A. Nikolaeva, "Confinement Effect in Single Nanowires Based on Bi", Physica B, 346, pp.282~ (2004)
- Y. Zhao, "A Simple Way to Prepare Bismuth Nanoparticles", Materials Letters, 58, pp.790~ (2004)
- J. Wang, "Synthesis and Characterization of Bismuth Single-Crystalline Nanowires and Nanospheres", Inorganic Chemistry, 43, pp.7552~ (2004)
- Y. W. Wang, "Size Control of Semimetal Bismuth Nanoparticles and the UV-Visible and IR Absorption Spectra", Journal of Physical Chemistry B, 109, pp.7067~ (2005)
- Y. Wang, "A Facile Water-Based Process for Preparation of Stabilized Bi Nanoparticles", Materials Research Bulletin, 44, pp.220~ (2009)
- M. Cachile, "Spontaneous Spreading of Surfactant Solutions on Hydrophilic Surfaces: CnEm in Ethylene and Diethylene Glycol", Langmuir, 15, pp.1515~ (1999)
- F. Comelli, "Densities, Viscosities, Refractive Indices, and Excess Molar Enthalpies of Binary Mixtures Containing Poly(ethylene glycol) 200 and 400 + Dimethoxymethane and + 1,2-Dimethoxyethane at 298.15 K", Journal of Chemical & Engineering Data, 47, pp.1226~ (2002)