점탄성 물성치를 고려한 WB-PBGA 패키지의 열-기계적 변형 거동
Thermo-mechanical Behavior of WB-PBGA Packages Considering Viscoelastic Material Properties
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
WB-PBGA 패키지를 구성하는 솔더볼 재료나 수지 복합재의 열-기계적 물성치는 온도에 대단히 큰 영향을받을 뿐 아니라, 온도가 유지되는 시간에도 큰 영향을 받는 것으로 알려져 있다. 본 논문에서는 무연 솔더 WB-PBGA 패키지의 변형 거동을 신뢰성 있게 해석하기 위하여 재료의 비선형성을 고려한 유한요소 해석을 수행하고 무아레 간섭계실험결과와 비교하였다. 먼저 수지 복합재의 점탄성 거동을 파악하기 위해 수지 접합재와 패키지 기판으로 구성된 이종접합체를 대상으로 하여 수지 복합재의 온도와 시간에 종속적인 점탄성 거동에 대해 유한요소 해석을 수행하고 결과를분석하였다. 무연 솔더가 실장된 WB-PBGA의 열-기계적 거동을 파악하기 위하여 솔더는 점소성 물성치를, 수지 복합재는 점탄성 물성치를 적용하여 온도 변화에 따르는 유한요소 변형해석을 수행하여 실험결과와 비교하였다. 결과적으로 패키지의 변형은 수지 복합재의 재료 모델에 따라 대단히 크게 달라지며, 수지 복합재는 온도와 시간에 영향을 받는 점탄성 물성으로 해석해야 함을 알 수 있었다. 본 논문에서와 같은 SAC 계열 무연 솔더 WB-PBGA 패키지의 경우 유리전이온도가 135oC 정도로 비교적 높은 B-type 수지 복합재의 점탄성 물성치를 적용했을 때 상대적으로 신뢰성 있는 해석 결과를 얻을 수 있는 것으로 밝혀졌다.
Abstract
It is known that thermo-mechanical properties of solder material and molding compound in WB-PBGA packages are considerably affected by not only temperature but elapsed time. In this paper, finite element analysis (FEA)taking material nonlinearity into account was performed for more reliable prediction on deformation behavior of a leadfree WB-PBGA package, and the results were compared with experimental results from moire interferometry. Prior to FEA on the WB-PBGA package, it was carried out for two material layers consisting of molding compound and substrate in terms of temperature and time-dependent viscoelastic effects of molding compound. Reliable deformation analysis for temperature change was then accomplished using viscoplastic properties for solder ball and viscoelastic properties for molding compound, and the analysis was also verified with experimental results. The result showed that the deformation of WB-PBGA packages was strongly dependent on material model of molding compound; thus, temperature and timedependent viscoelastic behavior must be considered for the molding compound analysis. In addition, viscoelastic properties of B-type molding compound having comparatively high glass transition temperature of 135oC could be recommended for reliable prediction on deformation of SAC lead-free WB-PBGA packages.
참고문헌 (22)
- D. Pollack, "Experimental Validation of Unified Constitutive Model of Eutectic Solder", Proc. of Society for Experimental Mechanics (2003)
- F. Garofalo, "Fundamentals of Creep and Creep-Rupture in Metal" (1965), The Macmillian Company
- L. Anand, "Constitutive Equations for Hot-Working of Metal", International Journal of Plasticity, 1, pp.213~ (1985)
- S. Wiese, "Microstructural Dependence of Constitutive Properties of Eutectic SnAg and SnAgCu Solder", Proc. of 53th Electronic Components and Technology Conference, pp.197~ (2003)
- 최남진, "플립 칩 패키지 솔더의 탄소성 거동과 크립 해석", 마이크로전자 및 패키징학회지, 17(2), pp.21~28 (2010), 한국마이크로전자및패키징학회
- C. T. Peng, "Design, Fabrication and Comparison of Lead-free", Eutectic Solder Joint Reliability of Flip Chip Package, 2004, 149~
- 최남진, "반도체 패키지의 열변형 해석 시 유한요소 모델의 영향", 대한기계학회논문집 A, 33(4), pp.380~387 (2009), 대한기계학회
- S. C. Chen, "The Numerical Analysis of Strain Behavior at the Solder Joint and Interface in a Flip Chip Package", K. Materials Processing Technology, 171, pp.125~ (2006)
- R. H. Krondorfer, "Packaging Effect on MEMS Pressure Sensor Performance", IEEE Trans. on Components and Packaging Technologies, 30(2), pp.285~ (2007)
- G. Hu, "Characterization of Viscoelastic Behaviour of a Molding Compound with Application to Delamination Analysis in IC Packages", Proc. of Electronics Packaging Technology Conference, pp.53~ (2006)
- 이정주, "Effective material properties and thermal stress analysis of epoxy molding compound in electronic packaging", IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART B-ADVANCED PACKAGING, 21(4), pp.413~421, IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
- Y. K. Kim, "Viscoelastic Effect of FR-4 Material on Packaging Stress Development", IEEE Transactions on Advanced Packaging, 30(3), pp.411~ (2007)
- Y. K. Kim, "Mechanism analyses on PBGA strip packaging warpage", Proc. of the 11th Int. Conf. Thermal, Mechanical and Multi-physics Simulation and Experiments in Micro-Electronics and Micro-Systems (2010)
- M. S. Kiasat, "Creep Behavior of a Molding Compound and Its Effect on Packaging Process Stresses", Proc. of the 51st Conf. on Electronic Components and Technology Conference, pp.931~ (2001)
- B. Han, "Resent Advancements of Moire and Microscopic Moire Interferometry for Thermal Deformation Analysis of Microelectrics Devices", Experimental Mechanics, 38(4), pp.278~ (1998)
- S. M. Cho, "Temperature dependent deformation analysis of ceramic under accelerated thermal cycling condition", Journal of Electronic Packaging of ASME, 126, pp.41~ (2004)
- Experimental Validation of Unified Constitutive Model of Eutectic Solder, "D. Pollack", Society for Experimental Mechanics, ~ (2003)
- S. M. Cho, "Observing Real-Time Thermal Deformations in Electronic Packaging", Experimental Techniques, 26(3), pp.25~ (2002)
- J. W. Joo, "Characterization of flexural and thermo-mechanical behavior of plastic ball grid package assembly using moire interferometry", MICROELECTRONICS RELIABILITY, 45(4), pp.637~646, PERGAMON-ELSEVIER SCIENCE LTD
- Y. K. Kim, "Material property effects on solder failure analyses", Microelctronics Reliability, 51(5), pp.985~ (2011)
- 이봉희, "유연 솔더와 무연 솔더의 점소성 변형거동 평가", 마이크로전자 및 패키징학회지, 18(2), pp.17~27 (2011), 한국마이크로전자및패키징학회
- J. Chang, "Finite Element Modeling Predicts the Effects of Voids on Thermal Shock Reliability and Thermal Resistance of Power Device", Welding Journal, 85, pp.63~ (2006)