무전해 도금에 의한 은코팅 구리 플레이크의 제조에서 전처리 공정 및 환원제 양의 영향
Effects of Different Pretreatment Methods and Amounts of Reductant on Preparation of Silver-coated Copper Flakes Using Electroless Plating
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
L-ascorbic acid 환원제를 사용하는 무전해 은도금 공정으로 Ag 코팅 Cu 플레이크를 제조하는 과정에서 전처리 방법 및 L-ascorbic acid의 농도에 따른 Ag 코팅층의 균일도 변화와 대기 중 승온에 따른 내산화 특성을 평가하였다. 전처리 방법에 따른 Cu 플레이크 표면 산화층의 제거 정도가 Ag 코팅층의 균일도에 큰 영향을 미치는 것을 관찰할 수있었고, 플레이크에서의 홀 결함 발생정도도 Ag 코팅 Cu 플레이크의 내산화 특성에 다소 영향을 미쳤다. 또한 L-ascorbic acid 환원제의 농도는 Ag 코팅층의 생성 균일도 및 두께 등에 큰 영향을 미치는 대표 공정변수임을 확인할 수 있었는데, L-ascorbic acid의 농도가 0.04 M일 경우 가장 우수한 품질의 Ag 코팅 Cu 플레이크가 제조되었나, 농도를 0.06 M로 증가시킬 경우 미세한 순수 Ag 입자들의 생성으로 인해 Ag가 코팅되지 않은 Cu 표면 면적이 증가하면서 시료의 내산화특성을 크게 감소시켰다.
Abstract
In the preparation of Ag-coated Cu flakes using L-ascorbic acid as a reductant for the electroless Ag plating, the effects of pretreatment methods and the reductant concentration on the uniformity of Ag coating layer and the antioxidation property of Ag-coated Cu flakes during the heating in air were evaluated. It was found that the removal degree of surface oxide layer during the pretreatment has great influence on the uniformity of Ag coating layer and the formation degree of hole defects in the flakes has slight effect on the anti-oxidation property of Ag-coated Cu flakes. It was also verified that the reductant concentration has great influence on the coverage uniformity and thickness of Ag coating, thus it was could be considered a main process parameter. When the reductant concentration was 0.04 M, high-quality Agcoated Cu flakes was obtained. When the concentration increased to 0.06 M, however, the anti-oxidation property of Agcoated Cu flakes became remarkably worse owing to remnant of Cu surface non-coated with Ag by the formation of pure Ag fine particles.
참고문헌 (31)
- D. Lu, "Conductivity Mechanisms of Isotropic Conductive Adhesives (ICAs)", Proc. International Symposium on Advanced Packaging Materials, pp.2~ (1999), IEEE
- L. Ye, "Effect of Ag Particle Size on Electrical Conductivity of Isotropically Conductive Adhesives", IEEE Trans. Electron. Packag. Manuf, 22(4), pp.299~ (1999)
- D. Lu, "A Study of Lubricants on Silver Flakes for Microelectronics Conductive Adhesives", IEEE Trans. Compon. Packag. Technol, 22(3), pp.365~ (1999)
- H. Jiang, "Surface Functionalized Silver Nanoparticles for Ultrahigh Conductive Polymer Composites", 18(13), pp.2969~ (2006)
- W. Zeng, "Polymer Light-Emitting Diodes with Cathodes Printed from Conducting Ag Paste", Adv. Mater, 19, pp.810~ (2007)
- R. Ma, "Carbon-Nanotube", Silver Networks in Nitrile Butadiene Rubber for Highly Conductive Flexible Adhesives, 2007, pp.24, 3344~
- J. Krantz, "Printing High Performance Reflective Electrodes for Organic Solar Cells", Org. Electron, 17, pp.334~ (2015)
- X. Xu, "Electroless Silver Coating on Fine Copper Powder and Its Effects on Oxidation Resistance", Mater. Lett, 57(24-25), pp.3987~ (2003)
- D. S. Jung, "Air-stable Silver-coated Copper Particles of Sub-micrometer Size", J. Colloid Interface Sci, 364(2), pp.574~ (2011)
- J. Zhao, "Fabrication of Cu-Ag Core-Shell Bimetallic Superfine Powders by Eco-friendly Reagents and Structures Characterization", J. Solid State Chem, 184(9), pp.2339~ (2011)
- H. T. Hai, "Developing Process for Coating Copper Particles with Silver by Electroless Plating Method", Surf. Coat. Technol, 201(6), pp.3788~ (2006)
- R. Zhang, "Highly Reliable, Low Cost, Isotropically Conductive Adhesives Filled with Ag-coated Cu Flakes for Electronic Packaging Applications", Int. J. Adh. Adh, 30(6), pp.403~ (2010)
- Y. Peng, "Study on Synthesis of Ultrafine Cu-Ag Core-Shell Powders with High Electrical Conductivity", Appl. Surf. Sci, 263(15), pp.38~ (2012)
- 김가혜, "Ag 코팅 Cu 플레이크 필러를 사용한 도전 페이스트의 전기 및 열전도도", 마이크로전자 및 패키징학회지, 21(4), pp.51~56 (2014), 한국마이크로전자및패키징학회[DOI]
- 김지환, "Ag 코팅 Cu 플레이크의 제조에서 전처리 및 Ag 코팅 공정 변화의 효과", 한국재료학회지, 24(11), pp.617~624 (2014), 한국재료학회
- 김지환, "구리 플레이크의 무전해 은도금에서 암모늄계 구리 전처리 용액의 적용법", 마이크로전자 및 패키징학회지, 22(4), pp.57~63 (2015), 한국마이크로전자및패키징학회
- X. Xu, "Electroless Silver Coating on Fine Copper Powder and Its Effects on Oxidation Resistance", Mater. Lett., 57(24-25), pp.3987~ (2003)
- D. S. Jung, "Air-stable Silver-coated Copper Particles of Sub-micrometer Size", J. Colloid Interface Sci, 364(2), pp.574~ (2011)
- J. Zhao, "Fabrication of Cu-Ag Core-Shell Bimetallic Superfine Ppowders by Eco-friendly Reagents and Structures Characterization", J. Solid State Chem, 184(9), pp.2339~ (2011)
- G.-M. Shi, "Pretreatment Effect on the Synthesis of Ag-coated Al2O3Powders by Electroless Deposition Process", Surf. Coat. Technol, 195(2-3), pp.333~ (2005)
- W. X. Zhang, "Electroless Ni–P Layer with a Chromium-free Pretreatment on AZ91D Magnesium Alloy", Surf. Coat. Technol, 201(8), pp.4594~ (2007)
- L. -M. Luo, "Specific Chemical Activation Pretreatment for Electroless Nickel Plating on SiC Ceramic Powders", Powder Technol, 249, pp.431~ (2013)
- J. Xiong, "Synthesis of Highly Stable Dispersions of Nanosized Copper Particles Using Lascorbic Acid", Green Chem, 13, pp.900~ (2011)
- 이종현, "Preparation of Sub-micrometer Cu Particles by Green Hydrothermal Synthesis under Air", Electronic Materials Letters, 11(3), pp.404~408 (2015), 대한금속·재료학회
- G. -L. Song, "Crystallographic Orientation and Electrochemical Activity of AZ31 Mg Alloy", Electrochem Comm, 12(8), pp.1009~ (2010)
- A. Muzikansky, "Ag Dewetting in Cu@Ag Monodisperse Core-Shell Nanoparticles", J. Phys. Chem. C, 117(6), pp.3093~ (2013)
- C.-H. Tsai, "Thermal Stability of Cu@Ag Core-Shell Nanoparticles", Corros. Sci., 74, pp.123~ (2013)
- S. -S. Chee, "Preparation and Oxidation Behavior of Ag-coated Cu Nanoparticles Less Than 20 nm in Size", J. Mater. Chem. C, 2(27), pp.5372~ (2014)
- M. J. Dignam, "Anodic Oxidation of Copper in Alkaline Solution", Can. J. Chem, 48(8), pp.1242~ (1970)
- N. S. Mclntyre, "Chemical Information from XPS-Applications to the Analysis of Electrode Surfaces", J. Vac. Sci. Tech, 18, pp.714~ (1981)
- D. W. Shoesmith, "Anodic Oxidation of Copper in Alkaline Solutions: Part IV. Nature of the Passivating Film", J. Electroanal. Chem, 143(1-2), pp.153~ (1983)