알루미늄 합금과 그 접합 방법
Aluminum alloys and their joining methods
3
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
Aluminum (Al) and its alloys have been used widely in a variety of industries such as structural, electronic, aerospace, and particularly automotive industries due to their lightweight characteristic, outstanding ductility, formability, high oxidation and corrosion resistance, and high thermal and electrical conductivity. Al have different kinds of alloys according to the various additional elements system and they should be selected properly depending on their effectiveness and suitability for their particular purpose. The major elements for Al alloys are silicon (Si), magnesium (Mg), manganese (Mn), copper (Cu), and zinc (Zn). In order for Al alloys to use for each industry, it is necessary to study of Al to Al joining and/or the Al to dissimilar materials joining to combine the individual parts into one. Many studies on joining technologies about Al to Al and Al to dissimilar materials have been performed such as press joining, bolted joint, welding, soldering, riveting, adhesive bonding, and brazing. This study reviews a variety of Al alloys and their joining method including its principles and properties with recent trends.
Abstract
Aluminum (Al) and its alloys have been used widely in a variety of industries such as structural, electronic, aerospace, and particularly automotive industries due to their lightweight characteristic, outstanding ductility, formability, high oxidation and corrosion resistance, and high thermal and electrical conductivity. Al have different kinds of alloys according to the various additional elements system and they should be selected properly depending on their effectiveness and suitability for their particular purpose. The major elements for Al alloys are silicon (Si), magnesium (Mg), manganese (Mn), copper (Cu), and zinc (Zn). In order for Al alloys to use for each industry, it is necessary to study of Al to Al joining and/or the Al to dissimilar materials joining to combine the individual parts into one. Many studies on joining technologies about Al to Al and Al to dissimilar materials have been performed such as press joining, bolted joint, welding, soldering, riveting, adhesive bonding, and brazing. This study reviews a variety of Al alloys and their joining method including its principles and properties with recent trends.
참고문헌 (32)
- P. Ebrahimzad, "Friction stir processing of aerospace aluminum alloy by addition of carbon nano tube", Trans. Indian. Inst. Met., 70(9), pp.2241~ (2017)[DOI]
- I. N. Fridlyander, "Aluminum alloys:Promising materials in the automotive industry", Met. Sci. Heat Treat., 44(9), pp.365~ (2002)[DOI]
- 박준협, "LIGHT-WEIGHT DESIGN OF AUTOMOTIVE SUSPENSION LINK BASED ON DESIGN OF EXPERIMENT", International Journal of Automotive Technology, 16(1), pp.67~71 (2015), 한국자동차공학회[DOI]
- 김환태, "자동차 경량화를 위한 알루미늄 합금의 강변형 가공 및 고능률 용접기술에 관한 동향", 대한용접접합학회지, 34(4), pp.62~66 (2016), 대한용접접합학회[DOI]
- S. M. Emami, "Effect of melt-to-solid insert volume ratio on Mg", Al dissimilar metals bonding, 2013, pp.22(1), 123~
- Z. Zhu, "Ultrasonic welding of dissimilar metals, AA6061", Int. J. Adv. Manuf. Technol., 59(5), pp.569~ (2012)[DOI]
- Ashutosh Sharma, "Influence of Various Additional Elements in Al Based Filler Alloys for Automotive and Brazing Industry", 대한용접접합학회지, 34(5), pp.1~8 (2015), 대한용접접합학회
- Ashutosh Sharma, "Possibility of Al-Si Brazing Alloys for Industrial Microjoining Applications", 마이크로전자 및 패키징학회지, 24(3), pp.35~40 (2017), 한국마이크로전자및패키징학회
- Ashutosh Sharma, "Aluminium Based Brazing Fillers for High Temperature Electronic Packaging Applications", 마이크로전자 및 패키징학회지, 22(4), pp.1~5 (2015), 한국마이크로전자및패키징학회
- D. Y. Su, "Microstructure and mechanical properties of 2219 aluminum alloy VPTIG welds during cyclic thermal treatment", Rare Metals (2015)
- L. Q. Niu, "Correlation between microstructure and mechanical properties of 2219-T8 aluminum alloy joints by VPTIG welding", Acta Metall. Sin. (Engl. Lett.), 30(5), pp.438~ (2017)[DOI]
- J. P. Martins, "Microstructure and texture assessment of Al–Mn–Fe–Si (3003) aluminum alloy produced by continuous and semicontinuouscasting processes", J. Mater. Sci., 44(11), pp.2966~ (2009)[DOI]
- M. Gunyuz, "Improvement of corrosion resistance in modified 3003 aluminum alloys produced by twin roll casting under different casting parameters", Light Metals, pp.1255~ (2015)
- A. Sharma, "Effect of <TEX>$ZrO_{2}$<", TEX> nanoparticles on the microstructure of Al-Si-Cu filler for low-temperature Al brazing applications, 2016, pp.47(1), 510~
- E. Guo, "Modification of Sr on 4004 aluminum alloy", JOM, 65(5), pp.613~ (2013)[DOI]
- S. Niu, "Microstructure and properties of lap joint between aluminum alloy and galvanized steel by CMT", J. Mater. Eng. Perf., 25(5), pp.1839~ (2016)[DOI]
- S. Shanavas, "Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding", Int. J. Adv. Manuf. Technol., 95(9), pp.4535~ (2018)[DOI]
- 심지연, "Characteristics of 5052 aluminum alloy sheets joint using electromagnetic force", Journal of Mechanical Science and Technology, 31(7), pp.3437~3444 (2017), 대한기계학회
- S. P. Chen, "Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite", J. Mater. Sci., 33(18), pp.4477~ (1998)[DOI]
- A. K. Mishra, "Wear behaviour of Al-6061", SiC metal matrix composites, 2017, pp.98(2), 97~
- 김용, "차체 소재 다변화에 따른 체결 및 접합기술", 대한용접접합학회지, 33(3), pp.12~18 (2015), 대한용접접합학회
- B. Xing, "Mechanical properties of self-piercing riveted joints in aluminum alloy 5052", Int. J. Adv. Manuf. Technol., 75(1), pp.351~ (2014)[DOI]
- F. Ding, "Study on activating TIG welding for aluminium alloys", Weld. World., 49(1), pp.22~ (2005)
- Z. Lu, "ARC welding method for bonding steel with aluminum", Front. Mech. Eng. China., 4(2), pp.134~ (2009)[DOI]
- S. Lin, "Dissimilar metals TIG welding-brazing of aluminum alloy to galvanized steel", Front. Mater. Sci. China., 3(1), pp.78~ (2009)[DOI]
- I. Sevim, "The study of MIG weldability of heat-treated aluminum alloys", Int. J. Adv. Manuf. Technol., 66(9), pp.1825~ (2013)[DOI]
- G. Turichin, "Simulation and technology of hybrid welding of thick steel parts with high power fiber laser", Phys. Procedia., 12(A), pp.646~ (2011)[DOI]
- D. Sakurada, "Underwater friction welding of 6061 aluminum alloy", J. Jpn. Inst. Light Met., 51(1), pp.2~ (2002)
- S. Sabari, "Experimental and numerical investigation on under-water friction stir welding of armour grade AA2519-T87 aluminium alloy", Deff. Technol., 12(4), pp.324~ (2016)[DOI]
- 이순재, "알루미늄의 브레이징과 원리", 마이크로전자 및 패키징학회지, 24(4), pp.1~7 (2017), 한국마이크로전자및패키징학회
- A. Iniesta, "Multi-objective optimization of an aluminum torch brazing process by means of genetic programming and R-NSGA-II", Int. J. Adv. Manuf. Technol., 91(9), pp.4117~ (2017)[DOI]
- D. Wei, "Torch brazing 3003 aluminum alloy with Zn-Al filler metal", Trans. Non-ferrous Met. Soc. China., 22(1), pp.30~ (2012)[DOI]