Porous한 물유리 기반 실리카 중공 미세구 형성에 대한 계면활성제 농도의 영향
Effect of the Surfactant Concentration on the Formation of Water Glass-based Porous Hollow Silica Microsphere
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 기존의 silicon alkoxide(tetraethyl orthosilicate, TEOS)에 비해 단가가 저렴하여 상업화에 유리한 물유리를 전구체로 사용하여 계면활성제의 농도에 따라 형성되는 다양한 크기의 실리카 중공 미세구(hollow silica microsphere, HSM)를 합성하였다. 계면활성제의 농도에 따른 실리카 중공 미세구의 형성에 대한 물성을 퓨리에 분광기(Fourier transform infrared spectrometer), 접촉각 측정기(contact angle measurement), Brunauer-Emmett-Teller 및 Barrett- Joyner-Halenda 분석기와 전계방사형 주사전자현미경(field emission scanning electron microscopy)를 이용하여 분석하였다. 계면활성제를 적정량의 농도로 투입하여 porou s한 물유리 기반 실리카 중공 미세구를 제조할 경우 비표면적은 169 m2/g, 평균 입자 크기 25.3 μm 및 표준편차는 6.25로 우수한 실리카 중공 미세구가 형성됨을 확인하였다.
Abstract
In this study, hollow silica microspheres (HSM) of various sizes formed according to the concentration of surfactants using water glass as a precursor, which is advantageous for commercialization due to its lower unit cost compared to conventional silicon alkoxide (tetraethyl orthosilicate, TEOS) was synthesized. The physical properties of the silica hollow microspheres according to the concentration of surfactant were analyzed using Fourier transform infrared, contact angle measurement, Brunauer-Emmett-Teller and Barrett-Joyner-Halenda analyzers and field emission scanning electron microscopy. When porous water glass-based hollow silica spheres were prepared by adding a surfactant at an appropriate concentration, it was confirmed that excellent hollow silica spheres were formed with a specific surface area of 169 m2/g, an average particle size of 25.3 μm, and a standard deviation of 6.25.
참고문헌 (26)
- M. Wei, "Influence of Silica Forming Media on the Synthesis of Hollow Silica Micr", Microporous Mesoporous Mater., 138, pp.17~ (2011)
- A. J. Wang, "Recent Progress on the Fabrication of Hollow Microspheres", Mater. Sci. Eng., 460-461, pp.1~ (2007)
- P. M. Arnal, "High-Temperature-Stable Catalysts by Hollow Sphere Encapsulation", Chem. Int. Ed., 45, pp.8224~ (2006)
- J. K. Cochran, "Ceramic Hollow Spheres and Their Applica-tions", Curr. Opin. Solid State Mater. Sci., 3, pp.474~ (1998)
- F. Caruso, "Nanoengineering of Inorganic and Hybrid Hollow Spheres by Colloidal Templating", Science, 282, pp.1111~ (1998)
- C. J. Martinez, "Porous Tin Oxide Nanostructured Microspheres for Sensor Applications", Langmuir, 21, pp.7937~ (2005)
- W. Yin, "BiVO4 Hollow Nanospheres : Anchoring Synthesis, Growth Mechanism, and Their Application in Photocatalysis", Eur. J. Inorg. Chem, 2009, pp.4379~ (2009)
- D. L. Wilcox, "Microsphere Fabrication and Applications : An Overview", MRS Symp. Proc., 372 (1995)
- K. K. Kim, "Hollow Silica Spheres of Controlled Size and Porosity by Sol-Gel Processing", J. Am. Ceram. Soc., 74, pp.1987~ (1991)
- A. Kentepozidou, "Nickel", microcapsules Composite Electrocoatings;The Synthesis of Water-containing Microcapsules and Preparation of the Coatings, 1996, pp.31, 1175~
- N. Kawahashi, "Preparation and Properties of Uniform Coated Colloidal Particles : V. Yttrium Basic Carbonate on Polystyrene Latex", J. Colloid Interface Sci., 138, pp.54~ (1990)
- Jr. R. Meyer, "Lead Zirconate Titanate Hollow-Sphere Transducers", J. Am. Ceram. Soc., 77, pp.1669~ (1994)
- 나하윤, "산 촉매가 물유리 기반 실리카 에어로겔의 기공구조에 미치는 영향", 마이크로전자 및 패키징학회지, 24(3), pp.13~18 (2017), 한국마이크로전자및패키징학회
- H. G. Sowman, "Non-vitreous Ceramic Metal Oxide Microcapules and Process for Making Same", U. S. Patent, 4,349,456, ~ (1982)
- H. Omranpour, "Effects oF Processing Conditions on Silica Aerogel During Aging : Role of Solvent, Time and Temperature", Journal of Non-Crystalline Solids, 379, pp.7~11 (2013)
- S. D. Bhagat, "Textural properties of ambient pressure dried water-glass based silica aerogel beads : One day synthesis", Microporous and Mesoporous Mater., 96, pp.237~244 (2006)
- X. Feia, "Effect of Alkyltriethoxysilane on the Performance of Sodium Silicate-based Silica Shell Phase Change Microcapsules", Colloids and Surf. A Physicochem. Eng. Asp., 608, pp.125503~ (2021)
- S. Qiu, "Synthesis and Characterization of Magnetic Polyvinyl Alcohol(PVA)Hydrogel Microspheres for the Embolization of Blood Vessel", IEEE Trans. Biomed. Eng., 63, pp.4~ (2016)
- C. Y. Jung, "One-Step Synthesis of Structurally Controlled Silicate Particles from Sodium Silicates using a Simple Precipitation Process", Langmuir, 26(8), pp.5456~5461 (2010)
- 이규연, "Characterization of Mechanical Property Change in Polymer Aerogels Depending on the Ligand Structure of Acrylate Monomer", 마이크로전자 및 패키징학회지, 23(3), pp.15~20 (2016), 한국마이크로전자및패키징학회
- D. B. Mahadik, "Elastic and Superhydrophobic Monolithic Methyltrimethoxysilane-based Silica Aerogels by Two-step Sol-gel Process", 마이크로전자 및 패키징학회지, 23(1), pp.35~39 (2016), 한국마이크로전자및패키징학회
- M. Thommes, "Physisorption of Gases, with Special Reference to the Evaluation of Surface Area and Pore Size Distribution (IUPAC Technical Report)", Pure Appl. Chem., 87(9-10), pp.1051~1069 (2015)
- P. He, "Highly Transparent Silica Aerogel Thick Films with Hierarchical Porosity from Water Glass via Ambient Pressure Drying", Mater. Chem. Phys., 147(1-2), pp.65~74 (2014)
- Y. Sargam, "Effects of Anionic and Nonionic Surfactants on the Dispersion and Stability of NanoSiO2 in Aqueous and Cement Pore Solutions", Cem. Concr. Res., 144, pp.106417~ (2021)
- 타쿠지야마모토, "Influence of Nonionic Surfactant Concentration on Physical Characteristics of Resorcinol- Formaldehyde Carbon Cryogel Microspheres", Journal of Industrial and Engineering Chemistry, 12(3), pp.484~488 (2006), 한국공업화학회
- M. A. Annisa, "Effect of Surfactant Mixing in Microspheres Preparations Using Polyblend of Poly(lactic acid)and Polycaprolactone", IOP Conf. Ser. Mater. Sci. Eng., 763, pp.012053~ (2020)