바이어스 스퍼터링에 의한 폴리이미드 기판에 증착한 금속 박막의 접착력 향상
Adhesion Enhancement of Thin Film Metals on Polyimide Substrates by Bias Sputtering
1
조회
0
다운로드
1
인용
0
참고문헌
초록
Al, Ti, Ta 및 Cr 박막을 DC 마그네트론 스퍼터링방법으로 0 – 800 W의 RF 바이어스로 폴리이미드 기판에 가하면서 증착한 후 금속박막의 접착성을 연구하였다. 접착력은 90° 필 테스트로 평가하였다. 필 테스트 결과 모든 시편에서 기판에 RF 바이어스를 가하면 접착력이 향상되었다. RF 바이어스를 가한 시편은 필링 도중 계면근처의 폴리이미드 내에서 파괴가 일어나면서 소성변형이 심하게 발생하였다. 단면 투과전자현미경 관찰에 의하면 금속/폴리이미드 계면은 분명하지 않고 복잡한 형상을 띄고 있었다. 이런 복잡한 계면은 RF 바이어스의 영향으로 생겼으며 접착력 향상의 주요 요인이었다.
Abstract
Al, Ti, Ta, and Cr thin films were deposited on a polyimide substrate using DC magnetron sputter to study the adhesion characteristics of metal films on polyimide substrates, while RF bias of 0 - 400 W was applied to the substrate during DC sputtering. The adhesion strength was evaluated using a 90-degree peel test. The peel tests showed that the adhesion strength was enhanced by applying the RF bias to the substrate in all specimens. Scanning electron microscopy and Auger depth profile of the fractured surfaces indicate that the polyimide underwent cohesive failure during peeling and heavy deformation was also observed in the metal films peeled from the polyimide substrate when the RF bias applied during the deposition. Cross-sectional transmission electron microscopy revealed that the metal/polyimide interface was not clear and complicated. This complicated interface, likely formed due to the RF bias applied to the substrate, was attributed to the adhesion enhancement obseved during the bias sputtering.
참고문헌 (13)
- "Microelectronics Packaging Handbook" (1997)
- "Microelectronic Packaging" (2005), CRC Press
- "Thin film multichip modules", ishm (1992)
- "An Auger study on the interaction of Cu and Cr films with polyimide", 8(1), pp.41~51 (1994)
- "Adhesion durability of tantalum BPDA-PDA polyimide interfaces", 12(1), pp.185~191 (1994)
- "Tantalum tantalum nitride and chromium adhesion to ployimide effect of annealing ambient on adhesion", 12(1), pp.95~104 (1998)
- "The effect of plasma treatment of ployimide surface on the adhesion of chromium", polyimide, 1993, pp.26(2), 71~80
- "A study of modified ployimide surface as related to adhesion", 8(3), pp.2376~2381 (1990)
- "Adhesion study in Aluminum", polyimide system, 1998, 337~382
- "Improvement of the adhesion to ployimide substrate of copper films prepared by ion beam and vapor deposition", 281-282, pp.356~359 (1996)
- "A study of Ag film properties grown by sputtering on the Substrate of polyester in Relation with its process parameters", 37(8), pp.1014~1019 (1999)
- "DC Sputtering with RF-Induced Substrate Bais", 29, pp.566~581 (1968)
- "TEM Analysis of Interfaces between Cr Film Sputtered with RF Bias and Photosensitive Polimide", 10(2), pp.39~47 (2003)