PEDOT:PSS 정공 수송층에 금 나노입자를 첨가한 유기태양전지의 제작 및 특성 연구
Fabrication and Characterization of Organic Solar Cells with Gold Nanoparticles in PEDOT:PSS Hole Transport Layer
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
본 논문은 캐리어의 이동도 및 전도도를 개선하고, 흡수된 빛의 이동 경로를 증가시켜 광흡수도를 높이기 위하여 정공 수송층 재료에 금 나노입자를 첨가하여 유기태양전지를 제작하였다. 광활성층으로는 P3HT와 PCBM의 bulkheterojunction 구조를 사용하였다. 유기태양전지에서 금 나노입자를 첨가한 정공 수송층의 효과를 관찰하기 위하여 금 나노입자의 첨가량(0, 0.5, 1.0 wt% Au)과 열처리온도(상온, 110oC, 130oC, 150oC)에 따른 광학적·전기적 특성을 조사하였다. 최대전력변환효율을 갖는 유기태양전지는 0.5 wt% 금 나노입자 첨가한 소자와 130oC에서 열처리한 소자에서 관찰되었다. 이때 유기태양전지의 전기적 특성은 금 나노입자를 0.5 wt% 첨가한 경우, 단락전류밀도, 곡선인자 및 전력변환효율은 각각 10.2 mA/cm2, 55.8% 및 3.1%로 나타났으며, 130oC에서 열처리한 경우, 12.0 mA/cm2의 단락전류밀도와64.2%의 곡선인자를 가지며, 4.0%의 전력변환효율이 관찰되었다.
Abstract
In this paper, organic solar cells(OSCs) based on bulk-heterojunction structures were fabricated by spin coating method using polymer P3HT and fullerene PCBM as a photoactive layer. The fabricated OSCs had a simple glass/ITO/PEDOT:PSS/P3HT:PCBM/Al structures. The photoactive layer of mixed P3HT:PCBM was formed with 1:1 weight ratio. The hole transport layer(HTL) was used conducting polymer PEDOT:PSS concentration with gold nanoparticles. The annealing temperature and concentration of nanoparticles in HTL were verified to improve the OSC characterization. The percentage of gold nanoparticles in HTL were 0.5 wt% and 1.0 wt%, and the surface morphology, electrical properties and absorption intensities were investigated. The devices were 0.5 wt%, and the highest 3.1% of the powder conversion efficiency(PCE), 10.2 mA/cm2 of the maximum short circuit current density(JSC), 0.535V of the open circuit voltage(VOC)and 55.8% of the fill factor(F.F) could be obtained when the nanoparticle concertration was 0.5 wt%. The annealing temperature of HTL was 110oC, 130oC, 150oC in vacuum oven and measured the absorption intensities, surface morphology,crystallinity and electrical properties were investigated. The best property was obtained in HTL annealed at 130oC for gold nanoparticles of 0.5 wt%, showing that JSC, VOC, F.F and PCE were about 12.0 mA/cm2, 0.525V, 64.2% and 4.0%,respectively.
참고문헌 (29)
- C. J. Brabec, "Plastic Solar Cells", Adv. Funct. Mater., 11(1), pp.15~ (2001)
- J. Y. Kim, "Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing", Science, 317, pp.222~ (2007)
- G. Li, "High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends", Nat. Mater, 4, pp.864~ (2005)
- A. O. Sevim, "Post-fabrication electric field and thermal treatment of polymer light emitting diodes and their PV properties", Org. Electron, 10, pp.18~ (2009)
- S. S. Sun, "Organic Photovoltaics: Mechanisms, Materials, and Devices" (2005), Talyor Francis
- D. M. Chapin, "A New Silicon p-n Junction Photocell for Converting Solar Radiation into Electrical Power", J. Appl. Phys, 25, pp.676~ (1954)
- J. Yi, "Properties and Applications of Thin Films Amorphous and micro-crystalline(poly) Silicon", 박사, pp.1994
- C. W. Tang, "Two-layer Organic Photovoltaic Cell", Appl. Phys. Lett, 48(2), pp.183~ (1986)
- N. S. Sariciftci, "Photoinduced Electron Transfer form a Conducting Polymer to Buckminsterfullerene", Science, 258, pp.1474~ (1992)
- M. K. Nazeeruddin, "Conversion of Light to Electricity by cis-X2bis(2,2'-bipyridyl-4,4'- dicarboxylate)ruthenium(II) Charge-Transfer Sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on Nanocrystalline TiO2 Electrodes", J. Am. Chem. Soc, 115, pp.6382~ (1993)
- D. Chirvase, "Influence of Nanomorphology on the Photovoltaic Action of Polymer-fullerence Composites", Nanotechnology, 15, pp.1317~ (2004)
- W. Ma, "Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology", Adv. Funct. Mater, 15, pp.1617~ (2005)
- T. W. Holcombe, "All-Polymer Photovoltaic Devices of Poly(3-(4-n-octyl)-phenylthiophene) from Grignard Materials (GRIM) Polymeriztion", J. Am. Chem. Soc, 131, pp.14160~ (2009)
- J. J. M. Hall, "Efficient Photodiodes from Interpenetrating Polymer Networks", Nature, 376, pp.498~ (1995)
- W. S. Shin, "Recent Development of Polymer Solar Cells", Poly. Sci. Tech, 17(4), pp.2006~ (2006)
- Y. T. Cheng, "Improvement of Organic Solar Cells by Flexible Substrate and ITO Surface Treatments", Appl. Surf. Sci, 256, pp.7606~ (2010)
- 장성규, "P3HT:PCBM 활성층을 갖는 유기 박막태양전지의 후속 열처리 효과", 마이크로전자 및 패키징학회지, 17(2), pp.63~67 (2010), 한국마이크로전자및패키징학회
- 조중연, "열처리 온도에 따른 ITO", MEH-PPV, 마이크로전자 및 패키징학회지, pp.2003, 10(4)[DOI]
- S. W. Tong, "Improvement in the Hole Collection of Polymer Solar Cells by Utilizing Gold Nanoparticle Buffer Layer", Chem. Phys. Lett, 453, pp.73~ (2008)
- J. Xue, "4.2% Efficient Organic Photovoltaic Cells with Low Series Resistances", Appl. Phys. Lett, 84(16), pp.3013~ (2004)
- B. Mazhari, "An Improved Solar Cell Circuit Model for Organic Solar Cells", Sol. Energy Mater. Sol. Cells, 90, pp.1021~ (2006)
- S. Shahin, "Ultrathin Organic Bulk Heterojunction Solar Cells: Plasmon Enhanced Performance Using Au Nanoparticles", Appl. Phys. Lett, 101, pp.053109~ (2012)
- Y. Kim, "Device Annealing Effect in Organic Solar Cells with Blends of Regioregular Poly(3-hexylthiophene) and Soluble Fullerene", Appl. Phys. Lett, 86, pp.063502~ (2005)
- A. Zen, "Effect of Molecular Weight and Annealing of Poly(3-hexylthiophene)s on the Performance of Organic Field-Effect Transistors", Adv. Funct. Mater, 14(8), pp.757~ (2004)
- -Phenyl- C61-butric Acid Methyl Ester Blends-Route Towards High Efficiency Polymer Solar Cells, "J. Mater. Chem", 2007, 3126~
- Y. Kim, "Effects of Thickness and Thermal Annealing of the PEDOT:PSS Layer on the Performance of Polymer Solar Cells", Org. Electron, 10, pp.205~ (2009)
- F. C. Chen, "Solvent Mixtures for Improving Device Efficiency of Polymer Photovoltaic Devices", Appl. Phys. Lett, 92, pp.103316~ (2008)
- Shinuk Cho, "Heat treatment-induced enhancement in the optical spectra of poly(3,4-ethylenedioxythiophene)", poly(stylenesulfonate) films, 2005, pp.46(4), 973~976[DOI]
- X. Wu, "A Study of Small Band- Gap Polymers-Head-to-Tail Regioregular Poly(3-(Alkylthio) Thiophenes) Prepared by Regioselective Synthesis Using Active Zinc", Macromolecules, 29(24), pp.7671~ (1996)