본문 바로가기
KERD
논문KCI 등재

PDMS-Ecoflex 하이브리드 소재를 이용한 투명 신축성 기판의 기계적 및 광학적 특성

Mechanical and Optical Characteristics of Transparent Stretchable Hybrid Substrate using PDMS and Ecoflex Material

0

조회

0

다운로드

7

인용

0

참고문헌

키워드

주제분류재료공학

초록

신축성 기판은 신축성 전자소자의 신축성, 공정성, 내구성을 결정하는 매우 중요한 소재로서 신축성 전자소자를 개발함에 있어서 우선적으로 고려해야 된다. 특히 현재 사용되는 신축성 기판은 히스테리시스가 존재하여 센서 및 기타 응용에 많은 어려움이 있다. 본 연구에서는 신축성 소재 기판으로 사용되는 PDMS와 Ecoflex를 혼합한 PDMS-Ecoflex 하이브리드 신축성 기판을 제작하여 신축성과 히스테리시스 특성을 향상하고자 하였다. 인장 시험을 통하여 신축성 하이브리드 기판의 기계적 거동을 관찰하였으며, 투과도 측정을 통하여 투과도를 평가하였다. Ecoflex의 함량이 증가할수록하이브리드 신축성 기판은 더 유연해지며, 탄성계수는 감소한다. 또한 PDMS 기판은 270% 변형률에서 파단이 발생한 반면, PDMS-Ecoflex 하이브리드 기판은 500%의 변형률까지 파단되지 않으며 우수한 신축성을 갖는 것을 알 수 있었다. 반복 인장시험에서 PDMS와 Ecoflex의 혼합비를 2:1로 제작된 기판은 히스테리시스가 발생하였다. 반면 1:1의 혼합비로제작된 기판의 경우 50%, 100%의 변형률에서는 히스테리시스가 발생하지 않았다. 결론적으로 500% 이상의 신축성을갖으면서 히스테리시스가 없은 기판을 제작하였다. 기판의 혼합비에 따른 광투과도 측정 결과, Ecoflex 기판의 투과도는68.6% 이였으나, PDMS-Ecoflex 함량이 2:1, 1:1인 하이브리드 기판의 경우, 각각 78.6%, 75.4%의 투과율을 보이며, 향후 투명 신축성 기판으로서 개발 가능성을 보여주었다.

Abstract

In the stretchable electronic devices, the stretchable substrate is a very essential material which determines the stretchability, performances and durability of the stretchable electronic devices. In particular, the current stretchable materials have hysteresis making difficult to used as sensors and other electronic devices. In this study, we developed a PDMS-Ecoflex hybrid stretchable substrate mixed with PDMS and Ecoflex material in order to increase stretchability and improve hysteresis characteristics. Mechanical behavior of the hybrid substrate was evaluated using a tensile test, and optical transmittance of the hybrid substrate was also measured. As the content of Ecoflex increases, the PDMS-Ecoflex hybrid substrate becomes more flexible, and the elastic modulus decreases. In addition, the PDMS substrate failed a tensile strain of 270%, while the PDMS-Ecoflex hybrid substrate did not fail even at 500% strain indicating excellent stretchability. In the repeated tensile test, the hybrid substrate with 2:1 mixing ratio of PDMS and Ecoflex showed hysteresis. On the other hand, in the case of the hybrid substrate with the mixing ratio of 1:1, hysteresis did not occur at a strain of 50% and 100%. Hence, we developed a stretchable substrate with over 150% stretchability and no hysteresis characteristics. The optical transmittance of the Ecoflex substrate was 68.6%, whereas the transmittances of the hybrid substrate with mixing ratio of 2:1 and 1:1 were 78.6% and 75.4%, respectively. These results indicate that the PDMSEcoflex hybrid substrate is a potential candidate for a transparent stretchable substrate.

참고문헌 (19)

  1. 오현아, "신축성 전자패키징용 강성도 국부변환 polydimethylsiloxane 기판의 탄성계수", 마이크로전자 및 패키징학회지, 22(4), pp.91~98 (2015), 한국마이크로전자및패키징학회
  2. 김대곤, "유연·신축성 전자 소자 개발을 위한 은 나노와이어 기반 투명전극 기술", 마이크로전자 및 패키징학회지, 22(1), pp.7~14 (2015), 한국마이크로전자및패키징학회[DOI]
  3. M. Belanger, "Hemocompatibility, biocompatibility, inflammatory and in vivo studies of primary reference materials low-density polyethylene and polydimethylsiloxane: A review", J. Biomed. Mater. Res, 58(5), pp.467~ (2001)
  4. A. Piruska, "The autofluorescence of plastic materials and chips measured under laser irradiation", Lab Chip, 5(12), pp.1348~ (2005)
  5. F. Hua, "Polymer Imprint Lithography with Molecular-Scale Resolution", Nano Lett, 4(12), pp.2467~ (2004)
  6. S. G. Charati, "Diffusion of Gases in Silicone Polymers: Molecular Dynamics Simulations", Macromolecules, 31(16), pp.5529~ (1998)
  7. Y. Gao, "Sandpaper-molded wearable pressure sensor for electronic skins", Sens. Actuators A Phys, 280, pp.205~ (2018)
  8. J. H. Kim, "Simple and cost-effective method of highly conductive and elastic carbon nanotube", polydimethylsiloxane composite for wearable electronics, 2018, pp.8(1), 1375~
  9. K. F. Lei, "A flexible PDMS capacitive tactile sensor with adjustable measurement range for plantar pressure measurement", Microsyst. Technol, 20(7), pp.1351~ (2014)
  10. B. W. An, "Stretchable, Transparent Electrodes as Wearable Heaters Using Nanotrough Networks of Metallic Glasses with Superior Mechanical Properties and Thermal Stability", Nano Lett, 16(1), pp.471~ (2015)
  11. A. Chortos, "Pursuing prosthetic electronic skin", Nat. Mater, 15(9), pp.937~ (2016)
  12. M. Liu, "Thickness-dependent mechanical properties of polydimethylsiloxane membranes", J. Micromech. Microeng, 19(3), pp.035028~ (2009)
  13. 최정열, "웨어러블 패키징용 Polydimethylsiloxane (PDMS) 신축성 기판의 강성도 변화거동", 마이크로전자 및 패키징학회지, 21(4), pp.125~131 (2014), 한국마이크로전자및패키징학회[DOI]
  14. M. Liu, "Influences of heating temperature on mechanical properties of polydimethylsiloxane", Sens. Actuators A Phys, 151(1), pp.42~ (2009)
  15. C.-X. Liu, "Analyzing resistance response of embedded PDMS and carbon nanotubes composite under tensile strain", Microelectron. Eng, 117, pp.1~ (2014)
  16. M. Amjadi, "Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire-Elastomer Nanocomposite", ACS nano, 8(5), pp.5154~ (2014)
  17. T. K. Kim, "Measurement of nonlinear mechanical properties of PDMS elastomer", Microelectron. Eng, 88(8), pp.1982~ (2011)
  18. Y. S. Lee, "Characteristics of Mechanical Behavior and Environmental Reliability of Ultra-Stretchable Ecoflex Substrates", Nanotech. Lett, 9(8), pp.1153~ (2017)
  19. J. Diani, "A review on the Mullins effect", Eur. Polym. J, 45(3), pp.601~ (2009)

이 간행물의 다른 논문 (23건)