레이저 마이크로 접합 및 솔더링
Laser Micro-Joining and Soldering
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
In this paper, the principles, types and characteristics of the laser and laser soldering are introduced. Laser soldering methods for electronics, metals, semiconductors are also presented. Laser soldering is a non-contact process that transfers energy to solder joint by a precisely controlled beam. Demands for laser soldering are increasing due to bonding for complex circuits and local heating in micro joint. Laser absorption ratio depends on materials, and each material has different absorption or reflectivity of the laser beam, which requires fine adjustment of the laser beam. Laser types and operating conditions are also important factors for laser soldering performance. In this paper, the performance of Nd:YAG laser soldering is compared to the hot blast reflow. Meanwhile, a diode laser gives different wavelength and smaller parts with high performance, but it has various reliability issues such as heat loss, high power, and cooling technology. These issues need to be improved in the future, and further studies for laser micro-joining and soldering are required.
Abstract
In this paper, the principles, types and characteristics of the laser and laser soldering are introduced. Laser soldering methods for electronics, metals, semiconductors are also presented. Laser soldering is a non-contact process that transfers energy to solder joint by a precisely controlled beam. Demands for laser soldering are increasing due to bonding for complex circuits and local heating in micro joint. Laser absorption ratio depends on materials, and each material has different absorption or reflectivity of the laser beam, which requires fine adjustment of the laser beam. Laser types and operating conditions are also important factors for laser soldering performance. In this paper, the performance of Nd:YAG laser soldering is compared to the hot blast reflow. Meanwhile, a diode laser gives different wavelength and smaller parts with high performance, but it has various reliability issues such as heat loss, high power, and cooling technology. These issues need to be improved in the future, and further studies for laser micro-joining and soldering are required.
참고문헌 (24)
- "Selective Soldering by Laser" (2011)[URL]
- J. Biffin, "Trends in Welding Research", 5th International Conference (1999), ASM International
- K. J. Kim, "Principle and application of laser", pp.25~53 (1997), Daeyoung
- 김정오, "레이저 솔더링 공정 및 솔더 범프 특성에 관한 연구", 박사, 재료공학, pp.2009
- C. A. Walsh, "Laser welding – Literature Review" (2002), Materials Science and Metallurgy Department, University of Cambridge
- Y. D. Park, "Remote Controlled PTC Thermistor by YAG Laser Irradiation", J. Microelectron. Packag. Soc, 4(2), pp.41~ (1997)
- J. P. Jung, "A Study on the Solderability of QFP Outer Lead Using Nd : YAG Laser", KJMM, 5(3), pp.317~ (1999)
- P. W. Fuerschbach, "Measurement and prediction of energy transfer efficiency in laser beam welding", WELD. J, 75(1), pp.24~ (1996)
- L. H. J. F. Beckmann, "Optical Systems for High-power Laser Applications: Principles and Design Aspects", Opt. Quant. Electron, 27(12), pp.1407~ (1995)
- J. Rapp, "Laser Welding of Aluminium Lightweight Materials: Problems, Solutions, Readiness for Application", Opt. Quant. Electron, 27(12), pp.1203~ (1995)
- G. Li, "An Investigation on Microstructure and Properties of Dissimilar Welded Inconel 625 and SUS 304 using High-power CO2 Laser", Int. J. Adv. Manuf. Tech., 76(5-8), pp.1203~ (2015)
- F. Bachmann, "High Power Diode Lasers: Technology and Applications", pp.5~74 (2007), Springer Science Business Media
- Diode Laser Welding of High Yield Steel, "A. Lisiecki", SPIE, 1~, pp.SPIE, 8703 (2012)
- T. Yoshida, "Nanometersized Silicon Crystallites Prepared by Excimer Laser Ablation in Constant Pressure Inert Gas", Appl. Phys. Lett, 68(13), pp.1772~ (1996)
- D. H. Kim, "Laser Processing", pp.163~164 (2005), Kyungmoon
- C. S. Kang, "Micro Joining", pp.291~ (2002), Samsungbooks
- A. Kunwar, "Heat and Mass Transfer Effects of Laser Soldering on Growth Behavior of Interfacial Intermetallic Compounds in Sn", Cu and Sn-3.5Ag0.5, Microelectron. Reliab, pp.2018, 80[DOI]
- Y. H. Tian, "Microjoining and Nanojoining", pp.299~326 (2008), Woodhead Publishing
- H. Banse, "Laser Beam Soldering – A New Assembly Technology for Microoptical Systems", Microsyst. Technol, 11, pp.186~ (2005)
- E. S. Ogochukwu, "Materials Science-Advanced Topics", pp.365~385 (2013), IntechOpen
- "Laser Soldering with High power Diode laser" (2012)[URL]
- 유정희, "가시광 레이저를 이용한 수광소자의 수동정렬 및 플립칩본딩", 마이크로전자 및 패키징학회지, 14(3), pp.7~14 (2007), 한국마이크로전자및패키징학회
- W. Horn, "High Power Diode Lasers for Industrial Applications", Laser Technik Journal, 4(3), pp.62~ (2007)
- M. Köntges, "A Novel Photovoltaic-module Assembly System for Back Contact Solar Cells using Laser Soldering Technique", European Photovoltaic Solar Energy Conference and Exhibition, 23, pp.1~ (2008)