Insulated, Passivated and Adhesively-Promoted Bonding Wire using Al2O3 Nano Coating
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Bonding wires are composed of conductive metals of Au, Ag & Cu with excellent electrical conductivities for transmitting power and signals to wafer chips. Wire metals do not provide electrical insulation, adhesion promoter and corrosion passivation. Adhesion between metal wires is extremely weak, which is responsible for wire cut failures during thermal cycling. Organic coating for electrical insulation does not satisfy bondability and manufacturability, and it is complex to apply very thin organic coating on metal wires. Automotive packages require enhanced reliability of packages under harsh conditions. LED and power packages are susceptible to wire cut failures. Contrary to conventional OCB behaviors, forming gas was not required for free air ball formation for both Ag and Pd-coated Cu wires with Al2O3 passivation.
Abstract
Bonding wires are composed of conductive metals of Au, Ag & Cu with excellent electrical conductivities for transmitting power and signals to wafer chips. Wire metals do not provide electrical insulation, adhesion promoter and corrosion passivation. Adhesion between metal wires is extremely weak, which is responsible for wire cut failures during thermal cycling. Organic coating for electrical insulation does not satisfy bondability and manufacturability, and it is complex to apply very thin organic coating on metal wires. Automotive packages require enhanced reliability of packages under harsh conditions. LED and power packages are susceptible to wire cut failures. Contrary to conventional OCB behaviors, forming gas was not required for free air ball formation for both Ag and Pd-coated Cu wires with Al2O3 passivation.
참고문헌 (20)
- Z. W. Zhong, "Overview of wire bonding using copper wire or insulated wire", Microeletronics Reliability, 51(1), pp.4~12 (2011)
- H. Kang, "TLP and Wire Bonding for Power Module", J. Microelectron. Packag. Soc, 26(4), pp.7~13 (2019)
- B. Kim, "Study on Sn-Ag-Fe Transient Liquid Phase Bonding for Application to Electric Vehicles Power Modules", J. Microelectron. Packag. Soc, 30(4), pp.61~68 (2023)
- Literature review on the properties of cuprous oxide Cu2O and the process of copper oxidation, "P. Korzhavyi", ~, pp.TR-11-08 (2011)
- G. Lee, "Review on Oxidation Resistance Technology for Copper Nanowire Transparent Electrodes", J. Microelectron. Packag. Soc, 30(2), pp.21~32 (2023)
- C. Chen, "Evaluation of Corrosion Resistance of Ag-Alloy Bonding Wires for Electronic Packaging", IEEE Transactions on Components, Packaging and Manufacturing Technology, 8(1), pp.146~153 (2017)
- M. D. Groner, "Gas Diffusion barriers on polymers using Al2O3 atomic layer deposition", Applied Physics Letters, 88, pp.051907~ (2006)
- S.-H. K. Park, "Ultrathin film encapsulation of an OLED by ALD", Electrochemical and Solid-State Letters, 8(2), pp.H21~ (2005)
- M. A. Hoque, "Effects of humidity and phosphor on silicone", phosphor composite in white light-emitting diode package, 2019, pp.30, 20471~20478
- S. Park, "Underfill acceleration factor based on thermal fatigue crack growth rate", 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC), pp.5490925~ (2010)
- S. Park, "Crack growth rate of thermally induced underfill fatigue", 2009 59th Electronic Components and Technology Conference, pp.5074170~ (2009)
- S. Park, "A Nonlinear Viscoelastic Fracture Analysis of Concrete", FRP Delamination in Aggressive Environments, 2006, pp.142, 9~27
- N. Badwe, "Interfacial fracture strength and toughness of copper", epoxy-resin interfaces, 2016, pp.103, 512~518
- C. Q. Cui, "Surface treatment of copper for the adhesion improvement to epoxy mold compounds", 48th Electronic Components and Technology Conference (Cat. No.98CH36206), pp.678863~ (1998)
- J. Liu, "Fracture behavior of an epoxy", aluminum interface reinforced by sol-gel coatings, 2006, pp.20(4), 277~305
- S. Park, "Au-Less, Ni-Less & Roughness-Less PCB Cu Surface Treatment Using All-in-One Al2O3 Passivation", 71st Electronic Components and Technology Conference(ECTC), pp.00111~ (2021)
- H. Xu, "Behavior of aluminum oxide, intermetallics and voids in Cu-Al wire bonds", Acta Materialia, 59(14), pp.5661~5673 (2011)
- H. G. Kim, "Microstructural evaluation of interfacial intermetallic compounds in Cu wire bonding with Al and Au pads", Acta Materialia, 64, pp.356~366 (2014)
- A. G. Evans, "Interface adhesion: effects of plasticity and segregation", Acta Materialia, 47(15-16), pp.4093~4113 (1999)
- W. Fu-liang, "Dynamics of Free Air Ball Formation in Thermosonic Wire Bonding", IEEE Transactions on Components, Packaging and Manufacturing Technology, 2(8), pp.1389~1393 (2012)