Virtual Fitting Program을 활용한 남성복 기본 팬츠 패턴개발 연구- 남성복 교재를 중심으로 -
A Study on the Development of Basic Pants Pattern for Men Using Virtual Fitting Program - Focused on the Menswear Textbook -
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men’s Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.
Abstract
The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men’s Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.
참고문헌 (18)
- Choi, J. Y., "Analysis of men's lower body figures and development of suit pnats patterns for MTM system", pp.2015
- Choi, Y. R., "Men's classic pattern" (2008), Kyohakyunguga
- 홍은희, "성인 남성의 기본 상의 원형 비교 연구 - 3차원 가상착의 시스템을 이용하여 -", 복식문화연구, 20(3), pp.403~415 (2012), 복식문화학회[DOI]
- 홍은희, "남성 싱글플리티드 팬츠 패턴비교분석 및 가상착의평가", 한국의상디자인학회지, 17(1), pp.105~115 (2015), 한국의상디자인학회
- Huh, D. J., "Industrial pattern design" (2002), Kyohakyunguga
- Jeong, Y. H., "3D Virtual clothing menswear pattern design II" (2014), Y-Book
- 강경희, "20대 남성을 위한 슬림 재킷패턴 비교분석 연구", 디자인지식저널, (33), pp.191~207 (2015), 한국디자인지식학회[DOI]
- 김경아, "남성 슬림 팬츠 패턴 비교 분석 - 3D CLO 가상착의 시스템을 활용하여 -", 복식문화연구, 22(4), pp.605~618 (2014), 복식문화학회[DOI]
- 김경아, "동작 적합성 평가를 위한 3차원 가상착의 프로그램 활용 방안 - 남성 진 팬츠를 중심으로 -", 한국의상디자인학회지, 17(4), pp.55~66 (2015), 한국의상디자인학회
- 김민정, "남성의 클래식핏과 슬림핏 셔츠 패턴 비교 분석에 관한 연구 - 3D 가상착의를 활용하여 -", 복식문화연구, 22(2), pp.209~224 (2014), 복식문화학회[DOI]
- Kim, O. K., "Men's wear pattern design" (2013), Kyungchunsa
- Kwak, T. K., "New young men's wear" (2008), Koreone
- Lee, J. S., "A comparative research on the drafting method of the bodice patterns for women of educational basic pattern", The Journal of Design, 20(1), pp.1~22 (2008)
- Nam, Y. J., "Men's clothing pattern making" (2003), Kyohakyunguga
- Park, S. K., "Men's wear pattern design : Executive pattern laboratory" (2013), Kyomoonsa
- 신동옥, "20대 초반 여성을 위한 슬랙스 패턴 설계 연구", 복식문화연구, 14(5), pp.699~714 (2006), 복식문화학회
- 서추연, "교육용 스커트 슬로퍼 개발을 위한 스커트 슬로퍼 비교분석 연구 - 3D 가상착의 평가를 중심으로 -", 한국디자인문화학회지, 22(2), pp.291~299 (2016), 한국디자인문화학회[DOI]
- 유현, "남성복 교육용 교재의 재킷패턴 비교분석 및 패턴개발연구", 한국의류학회지, 40(4), pp.701~715 (2016), 한국의류학회