투습도 측정방법에 따른 스포츠웨어용 투습직물의 투습특성
Breathability of Breathable Fabrics for Sportswear according to Measuring Method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study investigated water vapor permeability of the 73 breathable fabrics for sports-wear according to the materials, finishing methods and fabric structural parameters. The water vapor permeability by KS K 0594 method of PET breathable fabric was superior than that of nylon one, in addition, water vapor permeability of coated or laminated breathable fabrics were higher than those of hot melt or dot laminated fabrics. The water vapor permeability of breathable fabric was dependent on the thickness, weight and density, which was consistent with measuring method. However, water vapor permeability according to materials and finishing method showed different results according to measuring method. The correlation coefficient of WVP of PET breathable fabrics between ISO and KS K measuring methods was -0.83 and the correlation coefficient of WVP of coated breathable fabrics was -0.72 and -0.71 for KS K and ASTM and -0.72 for KS K and ISO in hot melt laminated breathable fabrics. According to regression analysis, WVP of PET breathable fabric by both KSK and ISO measuring methods was highly dependent upon on the density and weight. In addition, WVP of hot melt laminated breathable fabric was highly dependent upon thickness, weight and density. Therefore, relevant measuring method for WVP of breathable fabrics has to be adopted to measure precise breathability.
Abstract
This study investigated water vapor permeability of the 73 breathable fabrics for sports-wear according to the materials, finishing methods and fabric structural parameters. The water vapor permeability by KS K 0594 method of PET breathable fabric was superior than that of nylon one, in addition, water vapor permeability of coated or laminated breathable fabrics were higher than those of hot melt or dot laminated fabrics. The water vapor permeability of breathable fabric was dependent on the thickness, weight and density, which was consistent with measuring method. However, water vapor permeability according to materials and finishing method showed different results according to measuring method. The correlation coefficient of WVP of PET breathable fabrics between ISO and KS K measuring methods was -0.83 and the correlation coefficient of WVP of coated breathable fabrics was -0.72 and -0.71 for KS K and ASTM and -0.72 for KS K and ISO in hot melt laminated breathable fabrics. According to regression analysis, WVP of PET breathable fabric by both KSK and ISO measuring methods was highly dependent upon on the density and weight. In addition, WVP of hot melt laminated breathable fabric was highly dependent upon thickness, weight and density. Therefore, relevant measuring method for WVP of breathable fabrics has to be adopted to measure precise breathability.
참고문헌 (18)
- American Society for Testing and Material, "ASTM E96 modified inverted cup test method for evaluating moisture penetration through construction materials", ASTM International, ~ (2009)
- Congalton, D., "Heat and moisture transport through textiles and clothing ensembles utilizing the Hohenstein skin model", Journal of Coated Fabrics, 28(1), pp.183~196 (1999)
- Patricia A. Dolhan, "A Comparison of Apparatus Used to Measure Water Vapour Resistance", Journal of Coated Fabrics, 17(2), pp.96~109 (2016), SAGE Publications[DOI]
- P.W. Gibson, "Factors Influencing Steady-State Heat and Water Vapor Transfer Measurements for Clothing Materials", Textile Research Journal, 63(12), pp.749~764 (2016), SAGE Publications[DOI]
- Phillip Gibson, "An Automated Water Vapor Diffusion Test Method for Fabrics, Laminates, and Films", Journal of Coated Fabrics, 24(4), pp.322~345 (2016), SAGE Publications[DOI]
- Gibson, P. W., "An automated dynamic water vapour permeation test method", Performance of Protective Clothing, 6(1273), pp.93~107 (1997), American Society for Testing and Materials[DOI]
- Dunja Šajn Gorjanc, "Thermal and water vapor resistance of the elastic and conventional cotton fabrics", Textile Research Journal, 82(14), pp.1498~1506 (2012), SAGE Publications[DOI]
- J.C. Gretton, "A Correlation between Test Methods Used to Measure Moisture Vapour Transmission through Fabrics", Journal of Coated Fabrics, 25(4), pp.301~310 (2016), SAGE Publications[DOI]
- Hes, L., "Permetest instrument" (2005), Sensora Instruments &Consulting
- Jianhua Huang, "Sweating guarded hot plate test method", Polymer Testing, 25(5), pp.709~716 (2006), Elsevier BV[DOI]
- Huang, J., "Review of test methods for measuring water vapor transfer properties of fabrics", Cellular Polymer, 26(3), pp.167~191 (2007)
- Jianhua Huang, "Comparison of Test Methods for Measuring Water Vapor Permeability of Fabrics", Textile Research Journal, 78(4), pp.342~352 (2008), SAGE Publications[DOI]
- International Organization for Standardization, "ISO 11092Interlaboratory Evaluation of a New Sweating Guarded Hot Plate Test Method", ~ (2014)
- Jakšić, D., "Analytical method for determining resistance to water vapor flow through flat fabrics", Tekstilec, 31, pp.169~178 (1988)
- Korean Standards Association, "KS K 0594 Test method for water vapour permeability of textiles", Korea Agency for Technology and Standards, ~ (2013)
- Seungsin Lee, "Statistical modeling of water vapor transport through woven fabrics", Textile Research Journal, 82(3), pp.211~219 (2012), SAGE Publications[DOI]
- G. Robert Lomax, "Hydrophilic Polyurethane Coatings", Journal of Coated Fabrics, 20(2), pp.88~107 (2016), SAGE Publications[DOI]
- McCullough, E. A., "A comparison of standard methods for measuring water vapour permeability of fabrics", Measurement Science and Technology, 14(8), pp.1402~1408 (2003)[DOI]