3D 프린팅을 활용한 재료조합에 따른 온습도 변화 분석
Analysis of Changes in Temperature and Humidity by Material Combination Using 3D Printing
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Recently, various clothing items are being developed using 3D printing technology, but comfort has becomean issue while wearing them for a long time. Therefore, this study researched on how the temperature and humidity ofthe devices developed by 3D printing change depending on the material combination. Five types of material combinations (EVA foam, TPU density 10%, TPU density 30%, EVA foam+TPU density 10%, and EVA foam+TPU density 30%) were selected as variables, and the experiment was conducted for two different cases with and without a cover. All the ten types of samples were placed on the hot plate set at 36oC, and the surface temperature and humidity were measured at three different points for 10 minutes. As a result, the case with only TPU showed the greatest temperature change while the case with 100% EVA foam showed the least temperature change. The humidity of the surface layer gradually decreased with time for 100% EVA foam. For the case with TPU materials, the moisture was transferred to the surface layer at first, thereby increasing the humidity but then dropped significantly. Meanwhile, the cases with the cover on showed similar tendencies of change in both temperature and humidity where the overall temperature and humidity delivery were slow.
Abstract
Recently, various clothing items are being developed using 3D printing technology, but comfort has becomean issue while wearing them for a long time. Therefore, this study researched on how the temperature and humidity ofthe devices developed by 3D printing change depending on the material combination. Five types of material combinations (EVA foam, TPU density 10%, TPU density 30%, EVA foam+TPU density 10%, and EVA foam+TPU density 30%) were selected as variables, and the experiment was conducted for two different cases with and without a cover. All the ten types of samples were placed on the hot plate set at 36oC, and the surface temperature and humidity were measured at three different points for 10 minutes. As a result, the case with only TPU showed the greatest temperature change while the case with 100% EVA foam showed the least temperature change. The humidity of the surface layer gradually decreased with time for 100% EVA foam. For the case with TPU materials, the moisture was transferred to the surface layer at first, thereby increasing the humidity but then dropped significantly. Meanwhile, the cases with the cover on showed similar tendencies of change in both temperature and humidity where the overall temperature and humidity delivery were slow.
참고문헌 (25)
- Simon R.G. Bates, "3D printed polyurethane honeycombs for repeated tailored energy absorption", Materials & Design, 112, pp.172~183 (2016), Elsevier BV[DOI]
- 전재훈, "보급형 3D 프린터를 활용한 착용형 패션 프로토타입 개발", 한국의류학회지, 41(3), pp.468~486 (2017), 한국의류학회
- Eom, "Evaluation of Thermal Properties of 3D Spacer Technical Materials in Cold Environments using 3D Printing Technology", Polymers, 11(9), pp.1438~ (2019), MDPI AG[DOI]
- Ting Fei, "Flexible polyurethane", boron nitride composites with enhanced thermal conductivity, 2019, pp.32(3), 324~333[DOI]
- 한유정, "3D프린팅을 이용한 편성물의 역학적 특성 연구 -PLA, TPU 필라멘트를 중심으로-", 패션 비즈니스, 22(4), pp.93~105 (2018), 한국패션비즈니스학회[DOI]
- 홍경화, "Development of hip protectors for snowboarding utilizing 3D modeling and 3D printing", Fashion and Textiles, 7(1), pp.1~19 (2020), 한국의류학회[DOI]
- 장순호, "열가공 온도에 따른 TPU 복합직물의 물성 변화 연구", 한국섬유공학회지, 54(1), pp.22~27 (2017), 한국섬유공학회
- Young-Sun Jeong, "A study on the thermal conductivity of resilient materials", Thermochimica Acta, 490(1-2), pp.47~50 (2009), Elsevier BV[DOI]
- 정임주, "Effect of Surface Roughness of Fabrics on Tensile Properties of 3D Printing Auxetic Re-entrant Pattern", Textile Composites, 2021, pp.58(4), 167~176[DOI]
- Kapur, J., "Determination of moisture ingress rate through photovoltaic encapsulants", 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC), pp.3020~3023 (2013)
- 김슬기, "3D프린팅을 이용한 텍스타일 제조 기술동향", 한국의류산업학회지, 20(2), pp.117~127 (2018), 한국의류산업학회[DOI]
- Kim, S. J., "Analysis of the properties of domestic and foreign laminated high-performance moisture-permeable and waterproof fabrics", Proceedings of the Korean Society of Dyers and Finishers Conference, pp.199~202 (2006)
- Kweon, S. A., (2003), Kyohakyungusa Publisher
- 이효정, "피부길이변화를 고려한 3차원 다리보호대 모델링", 한국생활과학회지, 24(4), pp.555~569 (2015), 한국생활과학회
- Hyojeong Lee, "Evaluation of the Mechanical Properties of Porous Thermoplastic Polyurethane Obtained by 3D Printing for Protective Gear", Advances in Materials Science and Engineering, 2019, pp.1~10 (2019), Hindawi Limited[DOI]
- 이선희, "FDM 3D 프린팅 기술로 제작된 3D 프린팅 레이스", 보일 복합직물의 역학적 특성 및 세탁성 평가, 2018, pp.20(3), 353~359[DOI]
- Ching-Wen Lou, "Process technology and performance evaluation of functional knee pad", Fibers and Polymers, 11(1), pp.136~141 (2010), Springer Science and Business Media LLC[DOI]
- Hao-Yang Mi, "Characterization of thermoplastic polyurethane", polylactic acid (TPU, Materials Science and Engineering: C, pp.2013, 33(8)[DOI]
- Paula Milosevic, "3D technologies in individualized chest protector modelling", Textile & Leather Review, 1(2), pp.46~55 (2018), idd3[DOI]
- Park, "Developing Fall-impact Protection Pad with 3D Mesh Curved Surface Structure using 3D Printing Technology", Polymers, 11(11), pp.1800~ (2019), MDPI AG[DOI]
- 박소영, "3차원 모델링과 프린팅에 기반한 사이클복 샅 보호대의 프로토타입 제안", 한국생활과학회지, 28(2), pp.147~157 (2019), 한국생활과학회[DOI]
- Eujin Pei, "Direct 3D printing of polymers onto textiles: experimental studies and applications", Rapid Prototyping Journal, 21(5), pp.556~571 (2015), Emerald[DOI]
- Fei Shen, "Energy Absorption of Thermoplastic Polyurethane Lattice Structures via 3D Printing: Modeling and Prediction", International Journal of Applied Mechanics, 08(07), pp.1640006~ (2016), World Scientific Pub Co Pte Lt[DOI]
- Eyob Wondu, "Improvement of dielectric properties and thermal conductivity of TPU with alumina-encapsulated rGO", Polymer Testing, 102, pp.107322~ (2021), Elsevier BV[DOI]
- Zhou, Z. M., "High performance of thermoplastic polyurethane-graphene oxide self-healing composite film", Coatings, 11(2), pp.128~ (2021)[DOI]