First Principles Computational Study of Surface Reactions Toward Design Concepts of High Functional Electrocatalysts for Oxygen Reduction Reaction in a Fuel Cell System
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Design of novel materials in renewable energy systems plays a key role in powering transportation vehicles and portable electronics. This review introduces the research work of first principles-based computational design for the materials over the last decade to accomplish the goal with less financial and temporal cost beyond the conventional approach, especially, focusing on electrocatalyst toward a proton exchange membrane fuel cell (PEMFC). It is proposed that the new method combined with experimental validation, can provide fundamental descriptors and mechanical understanding for optimal efficiency control of a whole system. Advancing these methods can even realize a computational platform of the materials genome, which can substantially reduce the time period from discovery to commercialization into markets of new materials.
Abstract
Design of novel materials in renewable energy systems plays a key role in powering transportation vehicles and portable electronics. This review introduces the research work of first principles-based computational design for the materials over the last decade to accomplish the goal with less financial and temporal cost beyond the conventional approach, especially, focusing on electrocatalyst toward a proton exchange membrane fuel cell (PEMFC). It is proposed that the new method combined with experimental validation, can provide fundamental descriptors and mechanical understanding for optimal efficiency control of a whole system. Advancing these methods can even realize a computational platform of the materials genome, which can substantially reduce the time period from discovery to commercialization into markets of new materials.
참고문헌 (33)
- John Conti, "International Energy Outlook 2016. DOE, Ed", pp.1~18 (2016), Washington, DC
- Gregorio Marbán, "Towards the hydrogen economy, Int", J. Hydrogen Energy, 32, pp.1625~1637 (2007)
- S Dasappa, "Biomass gasification technology–a route to meet energy needs", Curr. Sci, 87, pp.908~916 (2004)
- A Boudghene Stambouli, "Fuel cells, an alternative to standard sources of energy", Renewable Sustainable Energy Rev, 6, pp.295~304 (2002)
- C Retna Raj, "Emerging new generation electrocatalysts for the oxygen reduction reaction", J. Mater. Chem. A, 4, pp.11156~11178 (2016)
- D Yogi Goswami, "New and emerging developments in solar energy", Sol. Energy, 76, pp.33~43 (2004)
- Byungchan Han, "First Principles Study of Effect of Surface Structure on Chemical Activity of Pt Electrocatalysts in Fuel Cells", pp.2007
- Ying Shirley Meng, "First principles computational materials design for energy storage materials in lithium ion batteries", Energy Environ. Sci, 2, pp.589~609 (2009)
- Pierre Hohenberg, "Walter Kohn, Inhomogeneous electron gas", Physical review, 136, pp.B864~ (1964)
- Peter E Blöchl, "Projector augmented-wave method", Phys. Rev. B, 50, pp.17953~ (1994)
- John P Perdew, "Generalized gradient approximation made simple", Phys. Rev. Lett, 77, pp.3865~ (1996)
- Georg Kresse, "Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set", Phys. Rev. B, 54, pp.11169~ (1996)
- Hubert A Gasteiger, "Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs", Appl. Catal., B, 56, pp.9~35 (2005)
- Mark K Debe, "Electrocatalyst approaches and challenges for automotive fuel cells", Nature, 486, pp.43~51 (2012)
- Wolf Vielstich, "Handbook of fuel cells: fundamentals technology and applications", pp.1~17 (2009), John Wiley & Sons
- H. B. Callen, "Thermodynamics and an Introduction to Thermostatistics", pp.1~50 (1998), AAPT
- Edward F Holby, "Pt nanoparticle stability in PEM fuel cells: influence of particle size distribution and crossover hydrogen", Energy Environ. Sci, 2, pp.865~871 (2009)
- MJN Pourbaix, "Electrochemical properties of the platinum metals", Platinum Met. Rev, 3, pp.47~53 (1959)
- Lei Tang, "Electrochemical stability of nanometer-scale Pt particles in acidic environments", J. Am. Chem. Soc, 132, pp.596~600 (2009)
- Jens Kehlet Nørskov, "Origin of the overpotential for oxygen reduction at a fuel-cell cathode", J. Phys. Chem. B, 108, pp.17886~17892 (2004)
- Byungchan Han, "First-principles based analysis of the electrocatalytic activity of the unreconstructed pt(100) surface for oxygen reduction reaction", J. Phys. Chem. C, 116, pp.6174~6183 (2012)
- Seung Hyo Noh, "First principles computational study on the electrochemical stability of Pt–Co nanocatalysts", Nanoscale, 5, pp.8625~8633 (2013)
- J Greeley, "Alloys of platinum and early transition metals as oxygen reduction electrocatalysts", Nat. Chem, 1, pp.552~556 (2009)
- Axel van de Walle, "Automating first-principles phase diagram calculations", J. Phase Equilib, 23, pp.348~ (2002)
- Byungchan Han, "Surface segregation and ordering of alloy surfaces in the presence of adsorbates", Physical Review B, 72, pp.205409~ (2005)
- Seung Hyo Noh, "First-principles computational study of highly stable and active ternary PtCuNi nanocatalyst for oxygen reduction reaction", Nano Res, 8, pp.3394~3403 (2015)
- Hyon Chol Kang, "Oxidation of PtNi nanoparticles studied by a scanning X-ray fluorescence microscope with multi-layer Laue lenses", Nanoscale, 5, pp.7184~7187 (2013)
- Seung Hyo Noh, "Towards a comprehensive understanding of FeCo coated with N-doped carbon as a stable bi-functional catalyst in acidic media", NPG Asia Mater, 8, pp.e312~ (2016)
- Xiaoju Cui, "Single layer graphene encapsulating non-precious metals as high-performance electrocatalysts for water oxidation", Energy Environ. Sci, 9, pp.123~129 (2016)
- Gyutae Nam, "Carbon-Coated Core–Shell Fe–Cu Nanoparticles as Highly Active and Durable Electrocatalysts for a Zn–Air Battery", ACS Nano, 9, pp.6493~6501 (2015)
- Anubhav Jain, "Commentary: The Materials Project: A materials genome approach to accelerating materials innovation", APL Mater, 1, pp.011002~ (2013)
- MI Jordan, "Machine learning: Trends, perspectives, and prospects", Science, 349, pp.255~260 (2015)
- Arun Mannodi-Kanakkithodi, "Machine learning strategy for accelerated design of polymer dielectrics", Sci. Rep, 6, pp.20952~ (2016)