디스플레이 유리의 눈부심 방지 표면처리를 위한 샌드 블래스팅 공정의 모형화
Modeling of Sand Blasting Process for Anti-Glare Surface Treatment of Display Glass
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Currently hydrofluoric acid (HF) based glass etch method is widely used for anti-glare (AG) surface treatment since it can effectively alleviate the specular reflection problem with relatively low processing cost. However, due to the environmental regulation and safety problem, it is essential to develop alternative technology to replace this method. For this, in this paper, we propose sand blasting based AG surface treatment method for display glass. To characterize the sand blasting process, surface roughness, haze, surface durability, and flatness are considered as process outputs and central composite design (CCD) method and response surface model (RSM) method are applied to model each process output. Models for surface roughness and haze showed 96.44% and 97.24% of R-squared values, respectively and they can be applied to optimize AG surface treatment process for various haze level requirements of display industries.
Abstract
Currently hydrofluoric acid (HF) based glass etch method is widely used for anti-glare (AG) surface treatment since it can effectively alleviate the specular reflection problem with relatively low processing cost. However, due to the environmental regulation and safety problem, it is essential to develop alternative technology to replace this method. For this, in this paper, we propose sand blasting based AG surface treatment method for display glass. To characterize the sand blasting process, surface roughness, haze, surface durability, and flatness are considered as process outputs and central composite design (CCD) method and response surface model (RSM) method are applied to model each process output. Models for surface roughness and haze showed 96.44% and 97.24% of R-squared values, respectively and they can be applied to optimize AG surface treatment process for various haze level requirements of display industries.
참고문헌 (11)
- V. F. Paz, "Implementation of a sparkle characterization method for anti-glare layers on automotive-displays", Proc. Int. W. Act. Matrix Flatpanel Disp, pp.1~4 (2018)
- Y. D. Almoallem, "Conformal antireflective surface formed onto 3-D silicon structure", J. Microelectromec. Syst, 27, pp.380~382 (2018)
- D. Tulli, "Monolithically integrated microand nanostructured glass surface with antiglare, antireflection, and superhydrophobic Properties", appl. mater. interfaces, 6, pp.11198~11203 (2014)
- P. Lin, "Effects of anti-glare surface treatment, ambient illumination and bending curvature on legibility and visual fatigue of electronic papers", Display, 29, pp.25~32 (2008)
- M. Isshiki, "Simulation of anti-glare cover glass using fourier optics consistent with sparkle and other visual performances", Soc. Inf. Disp. Tech. Dig, 48, pp.1383~1386 (2017)
- A. M. Nuijs, "Diffraction and scattering at antiglare structures for display devices", Appl. Opt, 33, pp.4058~4068 (1994)
- H. Laouamri, "Roughness influence on the optical properties and scratch behavior of acrylic coating deposited on sandblasted glass", Prog. Org. Coat, 101, pp.400~406 (2016)
- 강은지, "파우더 블라스팅을 이용한 사파이어 글라스의 가공성 평가", 한국생산제조학회지, 24(2), pp.224~230 (2015), 한국생산제조학회[DOI]
- C. Min, "Process analysis for surface treatment of glass anti-glare using sand blast process", Proc. IEEK summer Conf, pp.1435~1437 (2018)
- D. Whitehouse, "Surfaces and their Measurement", pp.16~24 (2012), Boston Butterworth-Heinemann
- D. Montgomery, "Design and analysis of experiments", pp.575~606 (1996), Jonh Wiley & Sons