혼성제 직립 케이슨의 활동에 대한 부분안전계수 산정
Evaluation of Partial Safety Factors on Sliding of Monolithic Vertical Caisson of Composite Breakwaters
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
혼성제 케이슨의 활동파괴모드에 대한 목표파괴수준에 따른 저항 및 하중 그리고 신뢰함수의 부분안전계수를 산정하였다. 이를 위해 파력의 편이를 고려한 혼성제 케이슨의 활동파괴모드에 대한 신뢰함수를 수립하고, 관련 확률변수의 불확실성에 대해 분석하였다. Level II AFDA 해석법을 이용하여 여러 수심조건 및 단면조건 그리고 파랑조건에 대해 신뢰성 해석을 수행하였다. 특히 대산항, 동해항 그리고 포항항의 실제 혼성제 케이슨의 활동파괴에 대한 신뢰성 해석도 수행하였다. 마지막으로 목표수준에 따른 혼성제 케이슨의 최소 소요 폭을 산정하는 방법으로 본 연구에서 산정된 부분안전계수에 대한 비교 평가를 실시하였다. 비교 결과, 목표수준 1%에서는 약간의 차이를 보이고 있으나 다른 모든 수준에서는 비교적 잘 일치하고 있다.
Abstract
Partial safety factors of the load, resistance, and reliability function are evaluated according to the target probability of failure on sliding mode of monolithical vertical caisson of composite breakwaters. After reliability function is formulated for sliding failure mode of caisson of composite breakwaters regarding bias of wave force, uncertainties of random variables related to loads, strengths are analyzed. Reliability analysis for the various conditions of water depth, geometric, and wave conditions is performed using Level II AFDA model for the sliding failure. Furthermore, the reliability model is also applied to the real caisson of composite breakwaters of Daesan, Dong- hae, and Pohang harbor. By comparing the required width of caisson of composite breakwater according to target probability of failure with the other results, the partial safety factors evaluated in this study are calibrated straightforwardly. Even though showing a little difference on the 1% of target probability, it may be found that the present results agree well with the other results in every other target probability of failure.
참고문헌 (29)
- 이철응, "혼성제 직립 케이슨의 활동에 대한 파괴확률", 한국해안·해양공학회논문집, 14(2), pp.95~107 (2002), 한국해안,해양공학회
- 이철응, "피복재의 부분안전계수 산정", 한국해안·해양공학회논문집, 19(4), pp.336~344 (2007), 한국해안,해양공학회
- 이철응, "처오름에 대한 신뢰성 해석 및 부분안전계수 산정", 한국해안·해양공학회논문집, 20(4), pp.355~362 (2008), 한국해안,해양공학회
- 전국 항만 설계파 추산 보고서, "해운항만청", ~ (1988)
- 대산항(1단계) 실시설계 보고서, "해양수산부", ~ (2000)
- Wave forces on vertical breakwaters:Reliability of design formula, "Bruining, H", ~, pp.Delft Hydraulics Rep. H 1903,MAST II (1994)
- Burcharth, H.F, "On the evaluation of failure probability of monolithic vertical wall breakwaters", pp.458~469 (1994), Wave Barriers in deepwaters
- Burcharth, H.F, "Design of vertical wall caisson breakwaters using partial safety factor", Proc. 26th. Int. Coast. Engrg. Conf., pp.2138~2151 (1998), ASCE
- "CEM(Coastal Engineering Manual), Coastal Engineering Research Center, US Army Corps Engineers", ~ (2006)
- Christensen, P.T, "Structural reliability theory and its applications" (1982), Springer-Verlag
- Christiani, E, "Reliability based optimal design of vertical breakwaters modelled as a series system of failure", Proc. 25th. Int. Coast. Engrg. Conf., pp.1598~1602 (1996), ASCE
- Goda, Y, "Random seas and design of maritime structures" (2000), Univ. of Tokyo Press
- Kawai, H, "Failure probability of breakwater caisson for tidal level variation", Rep. of the Port and Hab. Res. Inst., 36(4), pp.4~41 (1997)
- Kortenhaus, A, "Classification of wave loading on monolithic coastal structures", Proc. 26th. Int. Coast. Engrg. Conf., pp.867~880 (1998), ASCE
- Kortenhaus, A, "Damping of horizontal and uplift foces on horizontally composite breakwaters", Proc. 27th. Int. Coast. Engrg. Conf., pp.1724~1737 (2000), ASCE
- 이철응, "Reliability Analysis and Evaluation of Partial Safety Factors for Random Wave Overtopping", KSCE Journal of Civil Engineering, 13(1), pp.7~14 (2009), 대한토목학회
- McKenna, J, "Statistical distribution of horizontal wave forces on vertical breakwaters", Proc. 26th. Int. Coast. Engrg. Conf., pp.2082~2095 (1998), ASCE
- Nagao, T, "Evaluation of safety of breakwaters by the reliability based design method(1st report: Study on the safety against sliding)", Rep. of the Port and Hab. Res. Inst., 34(5), pp.40~70 (1995)
- Nagao, T, "Evaluation of safety of breakwaters by the reliability based design method(2nd report: Study on the safety against foundation failure)", Rep. of the Port and Hab. Res. Inst., 36(5), pp.26~56 (1997)
- Nagao, T, "Evaluation of safety of breakwaters by the reliability based design method(3rd report: Concluding the applicability of reliability based design method)", Rep. of the Port and Hab. Res. Inst., 37(2), pp.132~176 (1998)
- Oumeraci, H, "Probabilistic design of caisson breakwaters and sea walls - Present statues and perspectives", Proc. 27th. Int. Coast. Engrg. Conf., pp.1664~1677 (2000), ASCE
- Shimosako, K, "Reliability design method of composite breakwater using expected sliding distance", Rep. of the Port and Hab. Res. Inst., 37(1), pp.4~30 (1998)
- Shimosako, K, "Application of expectedsliding distance method for composite breakwaters design", Proc. 27th. Int. Coast. Engrg. Conf., pp.1885~1898 (2000), ASCE
- Takahashi, S, "Breakwater design, Handbook of port and harbor engineering", pp.951~1043 (1997), Chapman and Hall
- Takahashi, S, "Typical failures of composite breakwaters in japan", Proc. 27th. Int. Coast. Engrg. Conf., pp.1899~1910 (2000), ASCE
- Takayama, T, "Effect of directional distribution of extreme waves on composite breakwater reliability in sliding failure", Proc. 27th. Int. Coast. Engrg. Conf., pp.1738~1750 (2000), ASCE
- Takayama, T, "Estimation of sliding failure probability of present breakwaters for probabilistic design", Rep. of the Port and Hab. Res. Inst., 31(5), pp.3~32 (1992)
- Yamamoto, M, "Reliability analysis of composite breakwaters protected with armor blocks", Proc. 22nd. Int. Coast. Engrg. Conf., pp.1403~1416 (1990), ASCE
- Van der Meer, J, "Probabilistic calculations of wave forces on vertical structures", Proc. 24th. Int. Coast. Engrg. Conf., pp.1899~1910 (1994), ASCE