고대 금속활자의 복제를 위한 성분분석과 열역학적 주의 점
Composition Analysis and Thermodynamic Care for Replication of Ancient Metallic Type
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
‘Jikjisimcheyocheal (Jikji afterwards)’ is known as a first book printed by the metal type in the world.. The metal type used for printing this book has not been found yet. To help for replicating the original metal type, it is required to investigate the composition analysis of the copied metal type. In this study, the composition analysis and thermodynamic care for replicating of ancient metal type was performed on the basis of an analytical reports concerned with the ancient metal type which made after Jikji printing. Metal types were made by remelting and casting of the mother alloy which came from a cast of a mixed metals in accordance with the composition revealed in the literatures. Change of composition during remelting of mother alloy and casting of metal was detected by the EDS analysis. The reasons for variation in composition were discussed by metallurgical and thermodynamic point of view, and a mixing ratio of metals to get the original composition of ancient metal type is suggested. Some attention should be paid on mixing, melting and casting of metals to get an objected composition for copy of ancient metal type.
Abstract
‘Jikjisimcheyocheal (Jikji afterwards)’ is known as a first book printed by the metal type in the world.. The metal type used for printing this book has not been found yet. To help for replicating the original metal type, it is required to investigate the composition analysis of the copied metal type. In this study, the composition analysis and thermodynamic care for replicating of ancient metal type was performed on the basis of an analytical reports concerned with the ancient metal type which made after Jikji printing. Metal types were made by remelting and casting of the mother alloy which came from a cast of a mixed metals in accordance with the composition revealed in the literatures. Change of composition during remelting of mother alloy and casting of metal was detected by the EDS analysis. The reasons for variation in composition were discussed by metallurgical and thermodynamic point of view, and a mixing ratio of metals to get the original composition of ancient metal type is suggested. Some attention should be paid on mixing, melting and casting of metals to get an objected composition for copy of ancient metal type.
참고문헌 (13)
- 금속활자 주조 및 인쇄기술사 복원 연구 결과보고서, "淸州古印刷博物館", 129~ (2006)
- M. Kranzberg, "Technology in Western Civilization (2 Volumes)" (1967), Oxford University Press
- 노태천, "한국 고대 야금기술사 연구" (2000), 학연문화사
- 심규태, "옥외 청동문화재 보존을 위한 BTA 방청 피막의 특성에 미치는 코팅 조건의 영향", 대한금속·재료학회지, 47(10), pp.652~659 (2009), 대한금속·재료학회
- K. H. Cho, , J. Corros. Sci. Soc. of Korea, 27, pp.262~ (1998)
- 이재성, "한국의 전통 방짜유기와 이에 사용된 리벳에 관한연구", 대한금속·재료학회지, 46(1), pp.26~32 (2008), 대한금속·재료학회
- 印刷史硏究會, "本と活字歷史事典" (2000), 柏書房
- S. K. Lim, , J. Conservation Science, 1, pp.1~60 (1992)
- 금속활자 주조 및 인쇄기술사 복원 연구 결과보고서, "淸州古印刷博物館", 539~ (2006)
- 日本金屬學會, "非鐵金屬製鍊-新版製鍊篇-", pp.101~120 (1964), 日本金屬學會
- 朝鮮總督府地質照査所, "朝鮮鑛物地", pp.45~ (1940), 삼성당
- 洪鍾徽, "金屬材料-理論과 應用-", pp.367~ (1977), 普成文化社
- O. Kubaschewski, "Metallurgical Thermochemistry, 5th ed.", pp.358~ (1979), Pergamon Press