낮은 마운드 높이에 높은 상치구조물을 갖는 경사식 호안(LMHW 호안)의 월파량에 대한 실험적 연구
Experimental Study for Overtopping Discharges of Sea Dike having Low Mound and High Wave Wall (LMHW)
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
본 연구에서는 수리모형실험을 통해 낮은 마운드 높이에 높은 상치구조물을 갖는 경사식 호안(LMHW 호 안)의 월파량에 관해 검토하였다. 상치구조물의 형식은 직립식, Flare 식 및 Bullnose 식을 적용하였으며, 호안 전면 사면의 소파공은 테트라포드(2층적)와 아크로포드(1층적)를 적용하였다. 수리모형실험 결과는 EurOtop에서 제시하는 경사식 및 직립식 호안의 월파량 산정식과 비교하였다. LMHW 호안에 대해 경사식 호안의 월파량 산정식을 적용할 때 전면 소파공에 따른 조도영향계수( f )로 EurOtop Manual에서 제시하는 계수를 적용할 경우 월파량이 과소평가 되 었으나, 상치구조물 대비 마루높이 영향계수( AR )를 곱한 수정조도계수를 적용한 경우에는 실험결과와 비교적 일치하 였다. Flare 및 Bullnose 상치의 효과를 검토하기 위해 EurOtop Manual에서 제시하는 직립구조물 상부에 설치된 반 파공의 효과(Kortenhaus et al., 2003; Pearson et al., 2004a)와 매끄러운 사면에 설치된 반파공의 효과(Van Doorslaer et al., 2015)를 적용하였다. 검토 결과 매끄러운 사면에 설치된 반파공의 효과가 낮은 마운드 높이에 높은 상치구조물 을 갖는 경사식 호안에 보다 타당한 결과를 보였다.
Abstract
Overtopping discharge for sea dike having low mound and high wave wall (LMHW sea dike) is investigated with hydraulic experiments in this study. Vertical, Flare and Bullnose type wave walls are selected and Tetrapods (double layer) and Accropode (one layer) are adopted for armour layers of the front slope. The results of the hydraulic experiments are compared to the overtopping formulas for armoured rubble slopes and vertical sea dikes suggested by EurOtop Manual. Predicted overtopping discharges are underestimated as the roughness efficiency factors ( f ) of armour blocks suggested by EurOtop are adopted when the overtopping formula for armoured rubble slopes sea dike is used. Meanwhile the predicted overtopping discharges agree well with the hydraulic experiments when the modified roughness efficiency factors redefined by multiplying efficiency factor of the heights of armoured crest berm and wave wall ( AR ) are adopted. Return wall effects on a vertical wall (Kortenhaus et al., 2003; Pearson et al., 2004a) and the effects on a smooth dike slope (Van Doorslaer et al., 2015) in EurOtop Manual are investigated for Flare and Bullnose type wave walls. As a results of the comparison between experimental results and 2 formulas, return wall effect on a smooth dike was more valid for LMHW sea dike.
참고문헌 (20)
- Bretschneider, C.L., "Significant waves and wave spectrum", Ocean Industry, pp.40~46 (1968)
- Bruce, T., "A comparison of overtopping performance of different rubble mound breakwater armour", Proc. 30th Int. Conf. on Coastal Engineering, 5, pp.4567~4579 (2006)
- Bruce, T., "Overtopping performance of different armour units for rubble mound breakwaters", Coastal Engineering, 56(2), pp.166~179 (2009)
- "Neural Network, Manual NN_Overtopping 2.0, CLASH: Workpackage 8" (2005)[URL]
- Design report of construction of temporary sea dike for storage of dredging soil on southern container terminal of Busan new port, "Hyundai Engineering and Construction", ~ (2005)
- Design report of construction for extension of quay wall on Hwa-am wharf in Ulsan, "Hyundai Development Company", ~ (2006)
- 김영택, "경사입사파에 대한 직립구조물에서의 월파량 저감계수", 한국해안·해양공학회논문집, 22(3), pp.149~155 (2010), 한국해안,해양공학회
- 김영택, "주기영향을 고려한 직립식 구조물의 월파량 산정 : 비쇄파조건", 한국해안·해양공학회논문집, 24(3), pp.228~234 (2012), 한국해안,해양공학회[DOI]
- Kortenhaus, A., "Influence of parapets and recurves on wave overtopping and wave loading of complex vertical walls", Proc. Coastal Structures, 2013, pp.369~381 (2003)
- Mase, H., "Wave runup and overtopping at seawalls built on land and in very shallow water", Journal of Waterway, Port, Coastal, and Ocean Engineering, 139(5), pp.346~357 (2013), ASCE
- Mitsuyasu, H., "On the growth of spectrum of wind-generated waves (2)-spectral shape of wind waves at finite fetch", Proc. Japanese Conf. Coastal Engineering, pp.1~7 (1970)
- Molines, J., "Calibration of overtopping roughness factors for concrete armor units in non-breaking conditions using CLASH database", Coastal Engineering, 96, pp.62~70 (2015)
- 오상호, "반파 구조물에 의한 월파 저감 효과 분석반파 구조물에 의한 월파 저감 효과 분석", 한국해안·해양공학회논문집, 28(1), pp.1~6 (2016), 한국해안,해양공학회
- Pearson, J., "Effectiveness of recurve walls in reducing wave overtopping on sea walls and breakwaters", Proc. 29 th Int. Conf. on Coastal Engineering, pp.4404~4416 (2004)
- Report on additional tests, part B: Standard tests for roughness factors, CLASH SP4 report, "Pearson, J.", University of Edinburgh, ~ (2004)
- Pullen, T., "EurOtop. Wave overtopping of sea defences and related structures: Assessment Manual", Assessment Manual, ~ (2007)
- Smolka, E., "Estudio experimental del rebase de un dique en talud de cubípodos", Libro de las X Journadas Espaňolas de Costas y Puertos, Universidad de Cantabria-Adif Congresos, pp.803~809 (2009)
- van der Meer, J.W., "EurOtop. Manual on wave overtopping of sea defences and related structures", ~ (2016)
- van der Meer, J., "New physical insights and design formulas on wave overtopping at sloping and vertical structures", Journal of Waterway, Port and Ocean Engineering, 140(6) (2014)[DOI]
- Van Doorslaer, K., "Crest modifications to reduce wave overtopping of nonbreaking waves over a smooth dike slope", Coastal Engineering, 101, pp.69~88 (2015)