리튬이차전지 양극 분말 소재 위 탄소나노튜브의 직접 성장 거동 고찰
Investigation of direct growth behavior of carbon nanotubes on cathode powder materials in lithium-ion batteries
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study reports a direct growth of carbon nanotubes (CNTs) on the surface of LiCoO2 (LCO) powders to apply as highly efficient cathode materials in lithium-ion batteries (LIB). The CNT synthesis was performed using a thermal chemical vapor deposition apparatus with temperatures from 575 to 625 °C. Ferritin molecules as growth catalyst of CNTs were mixed in deionized (DI) water with various concentrations from 0.05 to 1.0 mg/mL. Then, the LCO powders was dissolved in the ferritin solution at a ratio of 1g/mL. To obtain catalytic iron nanoparticles on the LCO surface, the LCO-ferritin suspension was dropped in silicon dioxide substrates and calcined under air at 550°C. Subsequently, the direct growth of CNTs on LCO powders was performed using a mixture of acetylene (10 sccm) and hydrogen (100 sccm) for 10 min. The growth behavior was characterized by scanning and transmission electron microscopy, Raman scattering spectroscopy, X-ray diffraction, and thermogravimetric analysis. The optimized condition yielding high structural quality and amount of CNTs was 600 °C and 0.5 mg/mL. The obtained materials will be developded as cathode materials in LIB.
Abstract
This study reports a direct growth of carbon nanotubes (CNTs) on the surface of LiCoO2 (LCO) powders to apply as highly efficient cathode materials in lithium-ion batteries (LIB). The CNT synthesis was performed using a thermal chemical vapor deposition apparatus with temperatures from 575 to 625 °C. Ferritin molecules as growth catalyst of CNTs were mixed in deionized (DI) water with various concentrations from 0.05 to 1.0 mg/mL. Then, the LCO powders was dissolved in the ferritin solution at a ratio of 1g/mL. To obtain catalytic iron nanoparticles on the LCO surface, the LCO-ferritin suspension was dropped in silicon dioxide substrates and calcined under air at 550°C. Subsequently, the direct growth of CNTs on LCO powders was performed using a mixture of acetylene (10 sccm) and hydrogen (100 sccm) for 10 min. The growth behavior was characterized by scanning and transmission electron microscopy, Raman scattering spectroscopy, X-ray diffraction, and thermogravimetric analysis. The optimized condition yielding high structural quality and amount of CNTs was 600 °C and 0.5 mg/mL. The obtained materials will be developded as cathode materials in LIB.
참고문헌 (23)
- J. B. Goodenough, "Challenges for rechargeable Li batteries", Chemistry Materials, 22, pp.587~603 (2010)
- J. M. Tarascon, "Issues and challenges facing rechargeable lithium batteries", Nature, 414, pp.359~367 (2001)
- M. S. Wittingham, "Lithium batteries and cathode materials", Chemistry Review, 104, pp.4271~4301 (2004)
- K. Mizushima, "LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density", Materials Research Bulletin, 15, pp.783~789 (1980)
- Z. Chen, "Effect of a ZrO2 coating on the structure and electrochemistry of LixCoO2 when cycled to 4.5 V", Electrochemical and Solid-State Letters, 5, pp.A213~ (2002)
- J. Li, "Structural origin of the highvoltage instability of lithium cobalt oxide", Nature Nanotechnology, 16, pp.599~605 (2021)
- G. Amatucci, "Cobalt dissolution in LiCoO2-based nonaqueous rechargeable batteries", Solid State Ionics, 83, pp.167~173 (1996)
- R. Chebiam, "Comparison of the chemical stability of Li1−xCoO2 and Li1−xNi0.85Co0.15O2 cathodes", Journal of Solid State Chemistry, 163, pp.5~9 (2002)
- S. Venkatraman, "Phase relationships and structural and chemical stabilities of charged Li1−xCoO2−δ and Li1−xNi0.85Co0.15O2−δ cathodes", Electrochemical and Solid-State Letters, 6, pp.A9~ (2002)
- Q. Wang, "Thermal runaway caused fire and explosion of lithium ion battery", Journal of Power Sources, 208, pp.210~224 (2012)
- W. B. Hawley, "Electrode manufacturing for lithium-ion batteries-Analysis of current and next generation processing", Journal of Energy Storage, 25, pp.100862~ (2019)
- Y. Liu, "Current and future lithium-ion battery manufacturing", iScience, 24 (2021)
- R. Gnanamuthu, "Electrochemical properties of Super P carbon black as an anode active material for lithium-ion batteries", Materials Chemistry and Physics, 130, pp.831~834 (2011)
- J. Hu, "Using carbon black to facilitate fast charging in lithium-ion batteries", Journal of Power Sources, 508, pp.230342~ (2021)
- Y. Gao, "Novel LiNi1-xTix", 2Mgx, Electrochemical and Solid-State Letters, pp.1998, 1[DOI]
- F. Wang, "Stabilizing high voltage LiCoO2cathode in aqueous electrolyte with interphase-forming additive", Energy and Environmental Science, 9, pp.3666~3673 (2016)
- K. Wang, "Hybrid superaligned carbon nanotube", carbon black conductive networks : A strategy to improve both electrical conductivity and capacity for lithium ion batteries, 2013, pp.233, 209~215
- B. J. Landi, "Carbon nanotubes for lithium ion batteries", Energy and Environmental Science, 2, pp.638~654 (2009)
- G. H. Jeong, "Effect of nanoparticle density on narrow diameter distribution of carbon nanotubes and particle evolution during chemical vapor deposition growth", Journal of Applied Physics, 98, pp.124311~ (2005)
- G. H. Jeong, "Behavior of catalytic nanoparticles during chemical vapor deposition for carbon nanotube growth", Chemical Physics Letters, 422, pp.83~88 (2006)
- R. Socher, "Electrical and thermal properties of polyamide 12composites with hybrid fillers systems of multiwalled carbon nanotubes and carbon black", Composite Science and Technology, 71, pp.1053~1059 (2011)
- B. Marinho, "Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powder", Powder Technology, 221, pp.351~358 (2012)
- G. H. Jeong, "Size control of catalytic nanoparticles by thermal treatment and its application to diameter control of single-walled carbon nanotubes", Applied Physics Letters, 90, pp.043108~ (2007)