단일 도금욕에서 전위 제어를 이용해 형성한 다층 니켈/아연-니켈 도금층의 내식성 및 경도
Corrosion Resistance and Hardness of Ni/Zn-Ni Multilayer Electrodeposited by Potential Control in a Single Bath
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we developed and evaluated a multilayer nickel/zinc-nickel (Ni/Zn-Ni) coating using a single electrodeposition bath with controlled potential. Traditional zinc-nickel coatings offer superior corrosion resistance compared to pure zinc, particularly with an optimal Ni composition of 12-15 wt.%. However, we utilized a pulse-reverse potential (PRP) technique to create multi layers of Zn-Ni alloy and pure Ni. Linear sweep voltammetry (LSV) was employed to determine appropriate potential ranges for selective Zn-Ni alloy and Ni layer electrodeposition. The coating microstructure was analyzed using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). X-ray diffraction (XRD) revealed γ-phase Zn-Ni alloy in both direct current (DC) and PRP samples, but additional Ni phase was found in case of PRP. Corrosion resistance was evaluated using potentiodynamic polarization in 3.5 wt.% NaCl solution, where PRP coatings exhibited significantly lower galvanic couple current density and higher couple potential, demonstrating improved corrosion resistance compared to the DC case. Additionally, Vickers hardness testing indicated that the PRP coating had higher surface hardness than DC case. This Ni/Zn-Ni multilayer approach shows potential as a robust anti-corrosion solution, offering enhanced mechanical properties and corrosion resistance.
Abstract
In this study, we developed and evaluated a multilayer nickel/zinc-nickel (Ni/Zn-Ni) coating using a single electrodeposition bath with controlled potential. Traditional zinc-nickel coatings offer superior corrosion resistance compared to pure zinc, particularly with an optimal Ni composition of 12-15 wt.%. However, we utilized a pulse-reverse potential (PRP) technique to create multi layers of Zn-Ni alloy and pure Ni. Linear sweep voltammetry (LSV) was employed to determine appropriate potential ranges for selective Zn-Ni alloy and Ni layer electrodeposition. The coating microstructure was analyzed using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). X-ray diffraction (XRD) revealed γ-phase Zn-Ni alloy in both direct current (DC) and PRP samples, but additional Ni phase was found in case of PRP. Corrosion resistance was evaluated using potentiodynamic polarization in 3.5 wt.% NaCl solution, where PRP coatings exhibited significantly lower galvanic couple current density and higher couple potential, demonstrating improved corrosion resistance compared to the DC case. Additionally, Vickers hardness testing indicated that the PRP coating had higher surface hardness than DC case. This Ni/Zn-Ni multilayer approach shows potential as a robust anti-corrosion solution, offering enhanced mechanical properties and corrosion resistance.
참고문헌 (18)
- A. Alfantazi, "Pulse plating of Zn-Ni alloy coatings", Journal of Applied Electrochemistry, 26, pp.1225~1234 (1996)
- G. Barcelo, "Properties of Zn-Ni alloy deposits from ammonium baths", Journal of Applied Electrochemistry, 24, pp.1249~1255 (1994)
- D. Hall, "Electrodeposited Zinc–Nickel Alloy Coatings–A Review", Plating and Surface Finishing, 70, pp.59~65 (1983)
- H. Ashassi-Sorkhabi, "Zinc–nickel alloy coatings electrodeposited from a chloride bath using direct and pulse current", Surface and Coatings Technology, 140, pp.278~283 (2001)
- R. Fratesi, "Corrosion resistance of Zn-Ni alloy coatings in industrial production", Surface and Coatings Technology, 82, pp.158~164 (1996)
- S. Mosavat, "Study of corrosion performance of electrodeposited nanocrystalline Zn–Ni alloy coatings", Corrosion Science, 59, pp.81~87 (2012)
- A. Tozar, "Structural and corrosion protection properties of electrochemically deposited nano-sized Zn–Ni alloy coatings", Applied Surface Science, 318, pp.15~23 (2014)
- J. L. Chen, "Corrosion resistance of Zn–Ni", Ni and Ni, Materials and Corrosion, pp.2012, 63[DOI]
- J. Y. Fei, "Electrodeposition of zinc–nickel compositionally modulated multilayer coatings and their corrosion behaviours", Surface and Coatings Technology, 200, pp.3533~3539 (2006)
- B. Bahadormanesh, "Ni-P", Zn-Ni compositionally modulated multilayer coatings – Part 1: Electrodeposition and growth mechanism, composition, morphology, roughness and structure, 2018, pp.442, 275~287
- B. Bahadormanesh, "Electrodeposition of nanocrystalline Zn", Ni multilayer coatings from single bath : Influences of deposition current densities and number of layers on characteristics of deposits, 2017, pp.404, 101~109
- G. Chawa, "Compositionally modulated zinc alloy coatings for corrosion protection", Transactions of the IMF, 76, pp.117~120 (1998)
- N. Lotfi, "Zinc–nickel alloy electrodeposition: Characterization, properties, multilayers and composites", Protection of Metals and Physical Chemistry of Surfaces, 54, pp.1102~1140 (2018)
- A. Rousseau, "Single-bath Electrodeposition of Chromium-Nickel compositionally modulated multilayers(CMM) from a trivalent chromium bath", Plating and Surface Finishing, 86, pp.106~110 (1999)
- S. Anwar, "Electrochemical behaviour and analysis of Zn and Zn–Ni alloy anti-corrosive coatings deposited from citrate baths", RSC Advances, 8, pp.28861~28873 (2018)
- Y. Boonyongmaneerat, "Corrosion behavior of reverse-pulse electrodeposited Zn-Ni alloys in saline environment", Journal of Materials Engineering and Performance, 23, pp.302~307 (2014)
- S. Ghaziof, "The effect of pulse electroplating on Zn–Ni alloy and Zn–Ni–Al2O3 composite coatings", Journal of Alloys and Compounds, 622, pp.918~924 (2015)
- Y. Jiang, "Zn–Ni alloy coatings pulse-plated on magnesium alloy", Surface and Coatings Technology, 191, pp.393~399 (2005)