Analytical Parametric Study on Pullout Capacity of Embedded Suction Anchors
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The Embedded Suction Anchor (ESA) is a type of permanent offshore foundation that is installed by a suction pile. To increase the loading capacity against pullout, three wings (vertical flanges) are attached along the circumference at 120 degrees apart. Analytical parametric study using the proposed analytical solution method has been conducted to identify the effects of several parameters that are thought to influence the behavior of ESAs. The analysis results show that the pullout capacity increases as the anchor depth and the soil strength increase, and decreases as the load inclination angle increases. The anchor having square projectional area and being pulled horizontally at the middle of its length provides the highest pullout capacity.
Abstract
The Embedded Suction Anchor (ESA) is a type of permanent offshore foundation that is installed by a suction pile. To increase the loading capacity against pullout, three wings (vertical flanges) are attached along the circumference at 120 degrees apart. Analytical parametric study using the proposed analytical solution method has been conducted to identify the effects of several parameters that are thought to influence the behavior of ESAs. The analysis results show that the pullout capacity increases as the anchor depth and the soil strength increase, and decreases as the load inclination angle increases. The anchor having square projectional area and being pulled horizontally at the middle of its length provides the highest pullout capacity.
참고문헌 (11)
- Anchor mooring line computer program user manual, "Bang, S.", Naval Facilities Engineering Service Center, ~, pp.CR-6020-OCN (1996)
- Bang, S., "Embedded suction anchors for floating breakwaters", Coastal Engineering 2003, pp.469~477 (2003)
- Long-term holding capacity of statically loaded anchors in cohesive soils, "Beard, R. M.", Naval Construction Battalion Center, ~, pp.TN-1545 (1979)
- Beard, R. M., "Holding capacity of direct embedment anchors", Proceedings of the Civil Engineering in the Oceans, 1975, pp.1, 470~485[DOI]
- Cho, Y., "Calibration of installation, analytical performance study, and analytical solution of loading capacity of suction piles", Ph.D, pp.2001
- DAS, B. M., "Principles of Foundation Engineering" (1998), ITP
- DAS, B. M., "Ultimate resistance of vertical plate anchors in clay. Coastal Engineering", Coastal Engineering Proceedings, pp.1831~1842 (1986)
- Dickin, E. A., "Uplift behavior of horizontal anchor plates in sand", Journal of Geotechnical Engineering, ASCE, 114(11), pp.1300~1317 (1988)
- Hueckel, S., "Model tests on anchoring capacity of vertical and inclined plates", Proceedings, 4th International Conference on Soil Mechanics and Foundation Engineering, 2, pp.203~206 (1957)
- Mariupol'skii, L. G., "The bearing capacity of anchor foundations", Soil Mechanics and Foundation Engineering, 2, pp.26~37 (1965)
- Meyerhof, G. G., "Uplift resistance of inclined anchors and piles", Proceedings, 8th International Conference on Soil Mechanics and Foundation Engineering, 2(1), pp.167~172 (1973)